Question about Kenmore Elite 45986 Front Load Washer

2 Answers

Kenmore he4t need to kno where the drive mtoro is

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 5,911 Answers

Remove the rear panel from the washer. The drive motor is located under the wash tub. Working through the rear of the washer gives you better access. I hope this helps. If you need further assistance, please let me know.

Posted on Jan 15, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,214 Answers

Go to the Sears Parts Direct website, enter your full model number, and you will find an exploded view of the appliance cabinet.

Posted on Jan 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I want a manual for My Kenmore HE4T Front Load Washer


This site has lots of manuals. http://www.manualslib.com/products/Kenmore-He4t-110-4508-3024385.html#.VPmnI5cyiQE.mailto

Feb 14, 2014 | Kenmore HE4t 3.8 Cu. Ft. King Size...

1 Answer

How do you reverse the front door on a Kenmore HE4t washer?


The Kenmore HE4T washer does not have a reversible door. The matching dryer would have a reversible door.

Some newer washers do have a reversible door but it is still a very small number of washer that allow you to reverse the door.

You can not reverse the door on an HE4T washer.

Aug 21, 2011 | Kenmore HE4t 3.8 Cu. Ft. King Size...

1 Answer

Getting a f33 error on front load kenmore HE4t already changed the pressure switch and flow meter but still get f33 error


The F33 error code indicates a pump drive system error. If the pump ohms out correctly & the harness is secure I recommend replacing the CCU (central control unit).
Please see the following image provided for instructions.

http://media.fotki.com/1_p,stwwfrggtqfbrbbxgtqsskgwtqkq,vi/wgtbwqwssxsbwkbdtfwxrbfbddwwf/1/1303472/5961857/image9159087223444281043img-or.jpg

Remember to disconnect power to the washer before attempting access.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Jan 22, 2010 | Kenmore 3.8 cu. ft. HE4t Front Load Washer

1 Answer

Kenmore HE4T Gas Dryer not heating


It can be tested using a mulitmeter or ohmmeter. Check for continuity. If it has no continuity, then it is defective. Hope this helped and best wishes.

Aug 29, 2009 | Kenmore HE4t 3.8 Cu. Ft. King Size...

1 Answer

Kenmore HE4T won't stop on the Spin Cycle. Stays


Replaced the relays with the 16Amp rated ones from Digitel.

Aug 15, 2009 | Kenmore Elite 45986 Front Load Washer

1 Answer

Iget a f-11 trouble code on my kenmore elite he4t washer.


REplace your MCU. The MCU is the Drive Motor Control board and is located in the rear of the washer adjacent to the Drive Motor on the left-hand side (facing from the rear with the back panel removed). The wiring harness can also cause the error, but it is not as common a problem. Go onto kenmore.com and find your right washing machine and replace the part yourself. First try and take the wiring harness off and then reconnect it and see if the error code goes away if it doesnt then replace the part. Please Rate. Thank you

Feb 12, 2009 | Kenmore Elite 45986 Front Load Washer

3 Answers

Kenmore Elite HE4t washer won't spin


The motor controller board is likely bad.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Jan 06, 2009 | Kenmore Elite 45986 Front Load Washer

1 Answer

HE4t King Size Washer Balance Problem


remove the lower acess panel ( 3 screws across bottom) check for broen suspension/shock absorbers

Mar 02, 2008 | Kenmore 3.8 cu. ft. HE4t Front Load Washer

Not finding what you are looking for?
Kenmore Elite 45986 Front Load Washer Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Ron Lankford

Level 3 Expert

5386 Answers

Archaeology
Archaeology

Level 3 Expert

662 Answers

2mikecurtis

Level 2 Expert

65 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...