Question about RCA D52W20 52" Rear Projection HDTV-Ready Television

1 Answer

Front Screen protector is Spiderwebbed

I was wondering if you knew were I could get one of these?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

Http://www.tvscreenrepair.com/

Posted on Jan 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Removing a screen protector on a Hitachi 57F10A


You might try Hitachi for the service manual with full breakdown.

Basically the entire front screen unit comes off from the front in one piece, then inner two screens come out--carefully! and then frame needs to be partly pulled apart to get out screen from rear as it is in a slot all around the frame.

Apr 10, 2012 | Hitachi Projection Televisions

1 Answer

My brother threw the remote at the TV and cracked the screen. I was wondering how expensive it would be to replace the screen. The TV still works fine, and we have no need to buy a new TV anytime soon, so...


The protector screen is $247.79 If the screen behind that is damaged, that one is $147.97 If the last screen is damaged, that one is $495.00
I hope he only damaged the 1st clear screen, known at the screen protector

Dec 28, 2010 | Sony Grand WEGA KDP-51WS655 51" Rear...

1 Answer

Mitsubishi hdtv 1080 ws-a65 screen broke need replacement


there are 2 functionality screens and 1 screen protector (on some)
front screen = lenticular
back screen = fresnel
very front screen = screen protector (you can replace w plexiglass)

the fresnel and lenticular are very specific.. contact your local repair center for a new one. you can cut them from old screens but have to do just right (fresnel is a lens type - pic will be distorted if off center)

maybe find a old junker tv to pull screens from because new ones are about $100 a piece

Jun 03, 2010 | Mitsubishi WS-65311 65" Rear Projection...

1 Answer

I need to remove screen protector on my hitachi 65" big screen tv


There is a black plastic strip that fits into the groove at the top of the frame holding the protector and front screen. Pull that down and out (you might need to pry a little to get it started). The attached picture shows the strip partially pulled out at the right edge (photo depicts the top right of a 58K - with a wood cabinet).
Once this strip is removed, you should be able to see a gap (~2mm) between the top of the protector and the frame. Pull the middle of the protector toward you (you may need to hook it with something like a chrochet hook to get it out to where you can get a finger on it). Pull out one side of the protector, then work it loose fromt he bottom. (If it is stubborn, you may have to loosen the bottom frame. Take of the speaker grill, then unscrew the screw on the bottom of the surround for the control panel and pop the surround out. Then there are 3 screws that hold the cabinet frame {might me different for the 58B} and beneath that, 3 screws that hold the bottom of the inside frame. Once those are removed, you should be able to flex the inside frame enough to loosen the protector.)

Installation is the reverse. There are two grooves (at least on my set), and the protector goes in the rear groove(!) (same as the screen itself - first time I tried to put it in the unused groove closer to the front of the screen, and that iddn't work). The black plastic retainer strip goes in the front groove.

Jul 18, 2009 | Hitachi 43F300 43" Rear Projection...

1 Answer

SCRATCH ON SCREEN


front screen is a protector but also helps with the image quality. new screen runs about 190 dollars

Jun 02, 2009 | Akai PT61DL34 Television

2 Answers

Front Screen rotector is Spiderwebbed


you can get them here at the following link, just hit the contact button and send them a email with your model number and what youre needing.
http://servicemanuals.vstore.ca/

Jan 15, 2009 | RCA D52W20 52" Rear Projection HDTV-Ready...

2 Answers

Toshiba 50HDX82 Screen Protector


First remove the speaker grill. Then removed the control package via two screws. This should expose the screws that hold the front mask on. You can then slide the mask up and inch or so then pull it forward. Hope this helps.

Jul 16, 2008 | Toshiba 50HDX82 50" Rear Projection...

1 Answer

Removing a screen protector from a Hitachi 50UX58B Projection color TV


There is a black plastic strip that fits into the groove at the top of the frame holding the protector and front screen. Pull that down and out (you might need to pry a little to get it started). The attached picture shows the strip partially pulled out at the right edge (photo depicts the top right of a 58K - with a wood cabinet).ea84b4b.jpg
Once this strip is removed, you should be able to see a gap (~2mm) between the top of the protector and the frame. Pull the middle of the protector toward you (you may need to hook it with something like a chrochet hook to get it out to where you can get a finger on it). Pull out one side of the protector, then work it loose fromt he bottom. (If it is stubborn, you may have to loosen the bottom frame. Take of the speaker grill, then unscrew the screw on the bottom of the surround for the control panel and pop the surround out. Then there are 3 screws that hold the cabinet frame {might me different for the 58B} and beneath that, 3 screws that hold the bottom of the inside frame. Once those are removed, you should be able to flex the inside frame enough to loosen the protector.)

Installation is the reverse. There are two grooves (at least on my set), and the protector goes in the rear groove(!) (same as the screen itself - first time I tried to put it in the unused groove closer to the front of the screen, and that iddn't work). The black plastic retainer strip goes in the front groove.

Mar 22, 2008 | Hitachi 50UX58B 50" Rear Projection...

1 Answer

Toshiba TP50H50


Hi There!

I am not familiar with this model,however if there are no screws or clips on the inside or side panels, the front would be the place to start. usually right at the bottom front are screws to remove the bottom front panel first. Then the rest will be exposed. Work your way from the bottom up. The screen itself will be last and normally hooks over the top frame. Good Luck, JUS004

Feb 26, 2008 | Toshiba TP50H50 50" Rear Projection...

Not finding what you are looking for?
RCA D52W20 52" Rear Projection HDTV-Ready Television Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Projection Televisions Experts

The Wyzzyrd

Level 2 Expert

83 Answers

D. E. Hev

Level 3 Expert

1059 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

Are you a RCA Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...