Question about Dell Dimension 2400 PC Desktop
For removing Windows logon Passwords in safety, I would suggest tool Windows Password Seeker. Not just support XP/Vista/2000/NT, but also compatible with windows 7, it works perfectly to reset Windows OS Password. I wrote it to a Usb memory card. Booting up and clearing my password in just 4 minutes. You can Google Windows Password Seeker or download it from: http://www.passwordseeker.com
Posted on Nov 03, 2011
I know a website http://www.reset-windows-password.com there are a lot of softwares on it, you can download one to reset or remove your windows password. it is compatible with Windows 7.
Posted on Nov 04, 2011
If you are talking about XP, the previous owner probably did not assign a password to the administrator account. (I find that people usually forget to do that).
In this case, start the computer in safe mode, log in as administrator, and then reset the passwords.
Posted on Jan 15, 2009
Tips for a great answer:
Nov 10, 2014 | PC Desktops
on Nov 12, 2010 | PC Desktops
Dec 31, 2013 | Compaq PC Desktops
May 19, 2012 | eMachines ET1161-05 PC Desktop
and got to www.google.com In the google search box type: "Dell
Support" (without the quotes and put your manufacturer name before Support).
Look for downloads and drivers. Enter your model number and operating
system when requested. Look for Manuals and search them for Passwords.
Clearing Forgotten Passwords (the manual shows a picture of this)
1 Remove the computer cover.
2 Locate the 2-pin password jumper (PSWD) on the system board. By
default, Pin1 and Pin2 should be connected. You will need to remove the
jumper and boot the system, as follows.
3 Remove the jumper.
4 Replace the computer cover.
5 Connect your computer and monitor to electrical outlets, and turn them on.
6 After the Microsoft Windows desktop appears on your computer, shut down your computer.
7 Turn off the monitor and disconnect it from the electrical outlet.
8 Disconnect the computer power cable from the electrical outlet, and press the power button to ground the system board.
9 Open the computer cover.
10 Locate the 2-pin password jumper (PSWD) on the system board and
attach the jumper to reenable the password feature.
11 Replace the computer cover.
NOTICE To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.
12 Connect your computer and devices to electrical outlets, and turn them on.
NOTE This procedure enables the password feature. When you enter system setup (see "Entering System Setup" on page 79), both system and administrator password options appear as Not Set meaning that the password feature is enabled but no password is assigned.
13 Assign a new system and or administrator password. Replace the computer cover.
NOTICE To connect a network cable, first plug the cable into the network device and then plug it into the computer.
14 Connect your computer and devices to electrical outlets, and turn them on.
Apr 23, 2012 | Dell OptiPlex 330 Desktop Desktop Computer...
Dec 11, 2011 | Acer Aspire M1100-B1300A Refurbished AMD...
Aug 18, 2011 | Dell OptiPlex 780 MT PC Desktop
Oct 04, 2010 | PC Desktops
Apr 07, 2010 | Dell Dimension 2400 PC Desktop
Jan 15, 2009 | Dell Dimension 2400 PC Desktop
87 people viewed this question
Usually answered in minutes!