Question about Microsoft Xbox 360 Console

1 Answer

Cannot connect wireless controller to xbox 360 console

Posted by on

  • zentar Feb 13, 2009

    my wireless controllers were sync'd with my xbox 360 but now I can't get them to sync. A green light circles then flashes and continues to flash

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

If your asking how to sink your controller with your xbox there is a small butten on the top left corner of your controller about as round as a pin cap and u hold it down. there is a butten on your xbox that u push also thats a little bigger and it should sink.

Posted on Jan 15, 2009

3 Suggested Answers

  • 6 Answers

SOURCE: xbox 360 wireless guitar connection

perhaps there is somthing wrong with the guitar have you tried another one the mybe your friend has?

Posted on Aug 07, 2008

thaurfen
  • 623 Answers

SOURCE: xbox 360 wireless controller not connecting.

it sounds like your controller keeps losing sync with the 360.

- turn them both off
- turn on the 360 with the power button on the console
- wait for it to start up, then press the sync button next to the usb flap on front.
- then press the sync button on the controller (by the recharge connection slot)

That should reset it.

Posted on Nov 13, 2008

  • 1 Answer

SOURCE: xbox 360 wireless control pad wont connect

have you tried to pair it... the little white button on both the controller and the 360? works just like the wii remote

Posted on Feb 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i reactivate the wireless controller to my xbox 360


How to Configure an Xbox Controller Fotolia.com"> configure-xbox-controller-800x800.jpg Configure you Xbox controller.

The Xbox 360 utilizes two types of controllers: wired and wireless. Like most operations on a video game console, configuring a controller requires little effort. You can either plug the controller into a port on the Xbox 360, or sync a wireless controller using the console's built-in controls.
Difficulty:Easy Instructions

  1. Wired
    • 1 Connect the controller's cable to the in-line release cord. This cord prevents you from accidentally pulling the Xbox 360 along with your controller during game play.
    • 2 Insert the in-line release cord's USB plug into the USB port on the front of the console.
    • 3 Turn on the console to activate the controller automatically.
    Wireless
    • 1 Insert batteries in your wireless controller, if necessary.
    • 2 Hold down the "Guide" button on the controller.
    • 3 Push the Xbox 360's "Connect" button, located on the front of the console.
    • 4 Push the controller's "Connect" button to sync it with the Xbox 360.

Read more: How to Configure an Xbox Controller ' eHow.com http://www.ehow.com/how_7780486_configure-xbox-controller.html#ixzz1PRsAYmUA


here is a video on how to sync your wireless controller to your xbox360 console

http://www.youtube.com/watch?v=GpV-b1de2lM&feature=related

if you think this help please rate me sir thank you so much!!!

Jun 16, 2011 | Microsoft Xbox 360 Console

1 Answer

How do you set up an xbox 360 to have two wireless controllers?


Hi

Connecting Xbox 360 wireless controllers does not need Xbox live, you can follow the instructions here from the Microsoft Xbox website.

I hope this helps, Happy Gaming

Regards
KreativeGeek
http://gamingbox.wordpress.com

Apr 25, 2010 | Microsoft Xbox 360 Console

7 Answers

How do you turn on an xbox 360?


Simply press the big button that has green lights around in front of your console

Apr 21, 2010 | Microsoft Xbox 360 Console

2 Answers

How to setup two wireless controlers to an xbox


  1. Press and hold the Xbox Guide button until the controller turns on. The Xbox Guide button is the round button with the green "X" near the center of the controller.
  2. Make sure that your Xbox 360 console is turned on. If your Xbox 360 console is not turned on, press the power button. The power button is the large round button on your Xbox 360 console.
  3. On the Xbox 360 console, press and release the Connect button. The Connect button is the small round button on the Xbox 360 console.
  4. On the controller, press and release the Connect button. The Connect button is the small button on the front edge of the controller, between the left bumper button and the charging port.
  5. After the Ring of Light spins and flashes one time on the controller and on the console, the controller is connected. The quadrant on the Ring of Light that remains lit indicates the position in which the controller is connected.
  6. Note If you want help connecting an Xbox 360 Wireless Controller to your Xbox 360 console, you can contact Xbox Customer Support. For more information about how to contact Xbox Customer Support, please visit the Xbox Support (http://www.xbox.com/support/) Web site.

  • The controller remains connected to the Xbox console even when you turn off the Xbox console.
  • The controller is connected to only one Xbox console at a time. You can connect the controller to a different Xbox console at any time, but your connection to the previously connected console is lost. You must repeat these steps to reconnect the controller to the original console after your connection to the console is lost.
  • The controller works within 33 feet (10 meters) of your Xbox 360 console. However, objects between the controller and the console may reduce this range.
  • If the controller does not turn on, the batteries may have to be replaced.


Mar 22, 2010 | Microsoft Xbox 360 Console

1 Answer

My controller and xbox wont connect


To connect the controller to your Xbox 360 console, follow these steps:
  1. Press and hold the Xbox Guide button until the controller turns on. The Xbox Guide button is the round button with the green "X" near the center of the controller.
  2. Make sure that your Xbox 360 console is turned on. If your Xbox 360 console is not turned on, press the power button. The power button is the large round button on your Xbox 360 console.
  3. On the Xbox 360 console, press and release the Connect button. The Connect button is the small round button on the Xbox 360 console.
  4. On the controller, press and release the Connect button. The Connect button is the small button on the front edge of the controller, between the left bumper button and the charging port.
  5. After the Ring of Light spins and flashes one time on the controller and on the console, the controller is connected. The quadrant on the Ring of Light that remains lit indicates the position in which the controller is connected.

Aug 28, 2009 | Microsoft Xbox 360 Wireless Controller

2 Answers

My xbox 360 and wireless controller will sync but then it wont show that they are connected and even though i turned on my console by using the button on the console it just shows the green light turn on...


To connect the controller to your Xbox 360 console, follow these steps:
  1. Press and hold the Xbox Guide button until the controller turns on. The Xbox Guide button is the round button with the green "X" near the center of the controller.
  2. Make sure that your Xbox 360 console2_bing.gif is turned on. If your Xbox 360 console is not turned on, press the power button. The power button is the large round button on your Xbox 360 console2_bing.gif.
  3. On the Xbox 360 console, press and release the Connect button. The Connect button is the small round button on the Xbox 360 console.
  4. On the controller, press and release the Connect button. The Connect button is the small button on the front edge of the controller, between the left bumper button and the charging port.
  5. After the Ring2_bing.gif of Light spins and flashes one time on the controller and on the console, the controller is connected. The quadrant on the Ring of Light that remains lit indicates the position in which the controller is connected.

Aug 15, 2009 | Microsoft Xbox 360 Console

1 Answer

Xbox 360 wireless control pad wont connect


have you tried to pair it... the little white button on both the controller and the 360? works just like the wii remote

Feb 07, 2009 | Microsoft Xbox 360 Console

1 Answer

Xbox 360 wireless controller not connecting.


it sounds like your controller keeps losing sync with the 360.

- turn them both off
- turn on the 360 with the power button on the console
- wait for it to start up, then press the sync button next to the usb flap on front.
- then press the sync button on the controller (by the recharge connection slot)

That should reset it.

Nov 13, 2008 | Microsoft Xbox 360 Wireless Controller

1 Answer

Setting up a 360 wireless controller


Turn Your Console and Controller On The Xbox® Guide button in the center of your controller puts the Xbox 360® experience at your fingertips. Press and hold the Xbox Guide button to turn your console on.
To turn on your console only, press the power button on your console. To turn on your controller only, press the Start button on your controller.
Once on, pressing the Xbox Guide button gives you immediate access to the Xbox Guide. To turn off your console, press and hold the Xbox Guide button for three seconds and then confirm your selection.
Turn Your Console and Controller Off To turn your console and controller off, press and hold the Xbox Guide button on your controller for three seconds. Then select whether you want to turn off just your controller or both your controller and your console. (Selecting the console will turn off both the console and all connected controllers.)
To turn off one controller when multiple wireless controllers are connected, press and hold for three seconds the Xbox Guide button of the controller you want to turn off, then select Turn Off Controller.
To turn off your console only, press the power button on your console
When you connect a controller to your console, it is assigned a specific quadrant, which glows green to indicate the controller's number and position. Each subsequent controller connected to the console (up to four) is assigned an additional quadrant.
If system problems should arise, the Ring of Light on the console will flash combinations of red.

I hope this solved your problem.
Happy Gaming!

Oct 17, 2008 | Microsoft Xbox 360 Wireless Controller

Not finding what you are looking for?
Microsoft Xbox 360 Console Logo

Related Topics:

279 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Video Game Consoles Experts

Troy Gorman
Troy Gorman

Level 3 Expert

508 Answers

Pablo Gonzalez

Level 3 Expert

733 Answers

Jonathon summesfield

Level 2 Expert

284 Answers

Are you a Microsoft Video Game Console Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...