Question about Samsung CLP 300 Laser Printer

2 Answers

Open door problem

I just unpacked the CLP-310 and after connecting and everything it has a steady red light status on preventing from printing.
The software application tells me that there is a ''door open'' problem, but all panels seem to be closed correctly.
Actually, this situation holds from the first time I turned the printer on.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I finally got the green lights on.
I started pressing the already closed door really hard, even with a couple of punches. Not where the switch is, but in the middle of the panel, where - inside - there are the elements that touch the toners.
Pushing really hard got the lights turn into green and allowed a page to be printed.

I had to repeat the process in order to get another page printed, but now, after re-pushing really hard, as if you want to break something, the door is perceived as closed.

Posted on Jan 17, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 41 Answers

There is door sensor that will be broken during your unpacking ,its near the door that show error ,try to find it then you can remove it by unplugging the cable or repair it if you can ..

Posted on Jan 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Printer will not print - says: replace/install toner waste bin for Samsung clp-310


open the door you will se on your left side is a see trough bottel with toner in.
throug it out and clean it and put it back.

Oct 23, 2011 | Samsung CLP 315 Laser Printer

1 Answer

My newly installed Samsung CLP-310 has a red light showing next to the <...> icon. Please could you help me to resolve the problem. Thx


Hi paulette,
if the light is red and TONER COLORS LED all LEDs off

• The machine is experiencing an error, such as jammed paper, open cover, empty paper, installed waste toner container, or full waste toner container.
• The machine is experiencing a service required error, such as LSU error, fuser error, or Contact your sales or service representative.

if the light is red and TONER COLORS LED each LED lights red.

• Each toner cartridge is totally exhausted. You can not print.
• Each toner cartridge is wrong.

Aug 01, 2011 | Samsung CLP 300 Laser Printer

1 Answer

PRINTER IS A CLP-315. IT POWERS ON, BUT THE STATUS IS STEADY RED. THERE IS NO PAPER JAM. HOW CAN I CLEAR THIS?


What does the Smart Panel say? It normally tells you what the problem is. Is the waste toner container full? If so, the printer does not work untill you empty it and put it back. You do not need to buy a new waste toner container. This is my third CLP-310/315 so I know what I´m talking about. How can I make these letters s smaller? hannu.toyryla@spray.se

Jan 26, 2011 | Samsung CLP 315 Laser Printer

1 Answer

Why is red light on samsung clp- 315 and it is not printing


Does one of these situations apply to you?

The Status LED light is Red and the Toner lights are OFF (Check Smart Panel for message)

  • A Paper Jam has occurred.
  • The Front, Top, or Back Cover is open.
  • There is no paper in the Paper Tray.
  • There is a problem with the Waste Toner container.
  • A major error has occured.

The Status LED light is Blinking/Flashing Red and the Toner light(s) are Red

  • The Toner cartridge(s) that are Red need to be replaced. (Can still be used to print, but quality is unreliable)

The Status LED light is Red and the Toner light(s) are Red

  • The Toner cartridge(s) that are Red need to be replaced. (Printing is not available)
  • The Toner cartridge(s) are not installed properly.
Source: samsung troubleshooting guide for CLP-315

Sep 25, 2010 | Samsung CLP 315 Laser Printer

1 Answer

Printer stops when printing should begin with red light in status


There is a few reasons that cause the status light to turn red, paper jam, paper empty, toner cartridge empty, cover open and waste toner cartridge full. The PC Smart panel utility should give you an exact fault condition. Hope this helps.

Jul 08, 2010 | Samsung CLP 300 Laser Printer

1 Answer

My samsung 315 clp has status LED red light on.


It is a color laser printer.it has 4 toner cartridge(1)black(2)magenta(3)cyan(4)yellow all cartridge is missing or toner finished.Please purchase full set toner.All toner cartridge has a image sensor.When toner is run out then it is out of work.

Dec 14, 2009 | Samsung CLP 315 Laser Printer

2 Answers

Error light is red, and nothing prints


i think your paper sensor is damaged, replace it

red light show : when paper is not present or toner is not accepted, or door open


We have Zero cost solution for samsung -scx-4300, scx-4824/4828
ml-2240,ML 2245, ml 1640. clp 310/ 315, It is working permenently.
Refill cartridge is working for ever. which is running successfully.
also provide other new model reset solutions.

www.nakshatraworld.com

mob: 9713862555, 9893282285
vivekryp@yahoo.co.in

Nov 22, 2009 | Samsung ML 1710 Laser Printer

1 Answer

Status light remains red


download smarrt panel from samsung website,install on pc and run.have printer connected.will resolve issue.

Jul 06, 2009 | Samsung CLP 300 Laser Printer

2 Answers

Samsung CLP-315 system error


Low heat error comes from the fuser unit, there is a thermostat on the fuser change that and it will work

Mar 29, 2009 | Samsung CLP 315 Laser Printer

2 Answers

Samsung CLP-315


try to do this set of instruction & solution:

  1. Go to Start | Control Panel | Printers And Other Hardware | Printers And Faxes. Double-click the icon for your printer to open the Documents window and clear any pending print jobs by selecting Cancel All Documents from the Printer drop-down menu
  2. Try printing a test page from the printer, not from Windows XP. Most printers have a built-in test function that's activated by holding down one or more buttons while the printer is starting up. Check your printer's user manual for instructions. If this page prints successfully, you know the problem is either with your connection or with the software in your computer.
  3. Check your printer's USB or parallel connection.
  4. Try printing something simple from Windows' Notepad. To open Notepad, go to Start | All Programs | Accessories | Notepad, type a few lines of text in a document, and try printing it. If it successfully prints, the problem is with the software program you originally tried to print from.
  5. Try printing using Windows XP's generic printer driver. Open and run the Add Printer Wizard. When you get to the Install Printer Software screen, select Generic under Manufacturer and Generic/Text Only under Printers (see Figure 2).
  6. Select No for Do You Want To Use This Printer As The Default Printer? (see Figure 3). Click Next.
  7. When prompted on the next screen, tell Windows XP to print a test page. If the page successfully prints, then you probably have a problem with your installed printer driver. Either update or reinstall the driver.

Sep 16, 2008 | Samsung CLP 300 Laser Printer

Not finding what you are looking for?
Samsung CLP 300 Laser Printer Logo

562 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Printers & Copiers Experts

Whit
Whit

Level 1 Expert

185 Answers

HEMANT GROVER

Level 2 Expert

166 Answers

CheckitRight
CheckitRight

Level 3 Expert

1349 Answers

Are you a Samsung Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...