Hotpoint washer dryer BWD 129 stopped and won't drain or spin
Earlier the wash and spin lights were flashing at the same time and the machine stopped. I have tried to cancel the programme to drain the machine but nothing happened and the spin light remained on. The machine is full of washing sitting in water.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hotpoint bwd 129 leaking from underneath
This video will show you how to find that leak on any front
loading washing machine
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.
And don't forget to like us on facebook
If the clothes are coming out hot and steaming, then the water from the clothes is not condensing, it could be a blocked condenser, which will have to be removed and unblocked and cleaned.
The other possibility is that there is no cold water coming in on the drying cycle, this can also have the same effect.
Hope this helps.
If you click the timer forward can you get the spin to come on? If so your timer is faulty. Is it only on the spin cycle that washer doesnt work?Is there possibly a humm from the machine at spin? (assuming you have clothes inside) If there is a hum, you very possibly have a faulty motor capacitor.
From what I could find online at the Hotpoint UK website (this is probably very similar to the US site) it is a coldfill machine. This product brochure has a similar machine listed on page 25 (13 of 19). Hope this is helpful to you
I have a similar problem - washer wouldn't spin or drain. The problem with my Kenmore 90 series is that the lid switch needs to be replaced. It's a safety feature. During normal operation when the washer is spinning or draining - and you open the lid - the lid switch sensor knows that the lid is opened and then "stops" the machine. A new lid switch needs to be installed. I have picked up the part, but am still trying to figure out "how" to get inside of the washer. The only difference between what you describe, and my problem, is that there is no "unusual" noise coming from the machine. Hope this helps lead you in a good direction. Another good site is Bob Villa's site.