Question about Samsung SC-D23 Mini DV Digital Camcorder

Open Question

Transferring video from samsung SCD23 to computer

Is there any way to transfer captured video in samsung SCD23 digicam to computer?

Posted by on

5 Suggested Answers

  • 473 Answers

SOURCE: JVC GR-DVF31 - How to transfer MiniDV to PC?

buy that wire, check ur camcorder if it has 6pin or 4pin for firewire then check ur pc if it has firewire card...if not you have to purchase the ieee1394card. install it then connect your camcorder to pc through firewire and that will be it.. u also need to have a software for video capturing and editing like adobe, roxio, pinnacle , etc...hope that helps.

Posted on Sep 05, 2005

  • 205 Answers

SOURCE: Can't transfer video from cam to pc

You can't capture the video with a USB cable. The USB cable and software that came with the camcorder are only used to transfer still images.

To transfer video you'll need a DV cable (also known as a Firewire cable) and some additional software. I use Scenalyzer Live. It's not free, but you can download a demo copy to see if you like it before you buy it. Here's a link to the Scenalyzer website:

http://scenalyzer.com/

If you have the JVC manual you should read page 41. If you don't have the manual you can download it here:

http://www.devicemanuals.com/guide/Digital%20Camcorder/JVC/JVC-Compact-VHS-w-LCD-Screen-Camcorder-GR-D370AS-User's-TWpJME56VT.html

The download link is about half way down the left side. It's a little difficult to find, but it's there.

Lastly, all this assumes that your computer has a Firewirre port. Most new computers will have one, but if you do not you'll need to buy and install a Firewire PCI card. Let us know if you need more help.

Posted on Dec 04, 2007

  • 6 Answers

SOURCE: No sound when capturing video from Handycam to computer

There is no sound carrier on an S video connection. It's Video only. use the AV left and right cables for the sound. It is normal not to monitor audio when capturing.

Posted on Dec 18, 2007

  • 1 Answer

SOURCE: computer can not capture from video camera

Hello,

I have got a sony DCR-HC21 E PAL video camera but i am unable to transfer the video to my computer when i connect it through the usb cable the computer did not recognize the camera at all, can you help me how to transfer the recordered video to my computer through my e-mail subathar17@hotmail.com.

Thanks

Posted on May 14, 2008

  • 3 Answers

SOURCE: TRANSFER VIDEO TO PC

the samsung website has a vista update driver for this problem

Posted on Mar 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a solution to transfer the image from my sony camcorder dcr trv 285e to my vista laptop


The USB streaming driver for the Camcorder is not available for Windows Vista OS from Sony at this point. Hence it is not possible to transfer videos using USB interface. You may use i.LINK or A/V interface to transfer videos from the Camcorder to the Computer which is running on Windows Vista Operating System.



Please follow the steps to transfer video to a computer using an i.LINK connection (IEEE 1394).


IMPORTANT: Video capture software and a compatible video capture card must be installed on the computer. Depending on the computer manufacturer, various video capture cards and software (Adobe Premiere, Roxio Video Wave, Microsoft Windows Movie Maker, etc.) may be available or already installed on your computer. If necessary, contact the manufacturer of your computer for further information.

NOTE: Many Sony VAIO computers are bundled with Sony DVgate Motion or DVgate Plus software for video capturing. Some VAIO computers also include Click To DVD software that will allow video capture to the computer hard drive or directly to a DVD.

  1. Connect an i.LINK cable (also known as IEEE 1394) to the i.LINK port on the digital camcorder.


i.LINK Cable.

1_6_2012_1_15_26_pm.jpg




i.LINK port.

1_6_2012_1_14_58_pm.jpg



  1. Connect the other end of the i.LINK cable to the computer.

NOTE: The computer i.LINK ports and capture cards may have either 4-pin or 6-pin connections. Sony digital camcorders use i.LINK ports with 4 pins. If your computer only has a 6-pin i.LINK port, then it will be necessary to use a 4-pin to 6-pin i.LINK cable.

  1. Turn on the digital camcorder by moving the POWER switch to the VTR position.
  2. Cue the camcorder tape to the beginning of the video footage.
  3. Turn on the computer.
  4. Start the video capture software on the computer.
  5. Begin playing the recorded video in the camcorder.
  6. Begin importing the video with the capture software.

It should now be possible to copy the video using the video capture software if the computer hardware and software are configured correctly.

Jan 06, 2012 | Sony DCR-TRV285E Digital-8 Digital...

1 Answer

I have a SONY handycam DCR HC 46E. I am unable to transfer video from Mini DV cassettes to my PC(with windows 7 ultimate 32). I have also downloaded and installed PMB. With that I am able to transfer...


I'm sorry for the difficulties you're experiencing in transferring videos from the Camcorder to the Windows 7 Operating System. The USB streaming driver for the Camcorder is not available for Windows 7 OS from Sony at this point. Hence it is not possible to transfer videos using USB interface. You may use i.LINK or A/V interface to transfer videos from the Camcorder to the Computer which is running on Windows 7 Operating System. If your computer does not have the i.LINK port, you may purchase an i.LINK capture card to resolve the issue.

Please follow the steps to transfer video to a computer using an i.LINK connection (IEEE 1394).

IMPORTANT: Video capture software and a compatible video capture card must be installed on the computer. Depending on the computer manufacturer, various video capture cards and software (Adobe Premiere, Roxio Video Wave, Microsoft Windows Movie Maker, etc.) may be available or already installed on your computer. If necessary, contact the manufacturer of your computer for further information.

NOTE: Many Sony VAIO computers are bundled with Sony DVgate Motion or DVgate Plus software for video capturing. Some VAIO computers also include Click To DVD software that will allow video capture to the computer hard drive or directly to a DVD.
  1. Connect an i.LINK cable (also known as IEEE 1394) to the i.LINK port on the digital camcorder.

i.LINK Cable.

shajanrs_143.jpg


i.LINK port.

shajanrs_144.jpg

  1. Connect the other end of the i.LINK cable to the computer.
NOTE: The computer i.LINK ports and capture cards may have either 4-pin or 6-pin connections. Sony digital camcorders use i.LINK ports with 4 pins. If your computer only has a 6-pin i.LINK port, then it will be necessary to use a 4-pin to 6-pin i.LINK cable.
  1. Turn on the digital camcorder by moving the POWER switch to the VTR position.
  2. Cue the camcorder tape to the beginning of the video footage.
  3. Turn on the computer.
  4. Start the video capture software on the computer.
  5. Begin playing the recorded video in the camcorder.
  6. Begin importing the video with the capture software.
It should now be possible to copy the video using the video capture software if the computer hardware and software are configured correctly.


Thanks for understanding. Please let me know if you require any clarifications.

Jul 05, 2011 | Sony Handycam DCR-HC24E Mini DV Digital...

1 Answer

I need capture cam to computer


If what you want is to transfer it to the computer, then just transfer it after capturing the video using an usb chord.
If what you want is to use this as a digital cam, then you have to install a certain software.

Dec 03, 2010 | Samsung SC-D363 Mini DV Digital Camcorder

1 Answer

I need software for the Samsung SCL770 - to transfer video to DVD. Where can I get it?


Although this camera model did have USB connection&its specific software.But since your camcorder is an analog ones,you actually don't need any software for video transfer.

Instead, what you need is a VIDEO CAPTURE CARD which is used to transfer the analog video signal into digital video file for further work onto your PC.It should be already available at any computer store in the world.

Aug 21, 2010 | Samsung SC-L770 Camcorder

1 Answer

How to transfer recording from scd23 to computer? Do I need some software? I'm attaching the USB but nothing is happening.


research has shown that i need a IEEE1394 card b4 i can transfer any footage to my laptop

Sep 01, 2009 | Samsung Video Cameras

1 Answer

How do i transfer my sony handycam ccd tr416


Use the link below to transfer video to your Computer using A/V cable and the Video Capture software.
http://www.kb.sony.com/selfservice/microsites/search.do?cmd=displayKC&externalId=C428275

Aug 07, 2009 | Sony Handycam CCD-TR416 Camcorder

1 Answer

When I copy a film from my camera to my computer I couldnot get the voice( the audio)part , only the movie transfers how could I transfer both. Even if I connect it perfectly I couln't hear the voice only...


Dear sir,

Welcome to fixya customer Support
We will help You.
I think u r transfering movies or videos wrong way.Actual Procedure is Like this

1.First Connect the camera to the Video capturing cards or Ports of computer.
2.Open Video Capturing Application installed in your pc (comes along with Your capturing device)
3.then Play the videos in Your Camera
4. Then Start Capture in computer.

This is the actual way of capturing Videos to the PC.I think it helps
If it is not Just check the camera audio video jacks.Adjust the TV system(PAL or NTSC) in camera and PC.

If it is not solves u r Problem.Come back with further Information.

Good Luck


Thanking u
for Choosing Fixya Customer Support
Chandrashekhar





Jul 14, 2009 | Samsung SC-D103 Mini DV Digital Camcorder

1 Answer

Connecting analong camcorder to computer


The only Analog camcorder that has a USB Connection for transferring pictures or video is the SC-L770. The SC-L770 can transfer video (live or recorded) and still photos through the USB connection. You can also transfer audio using the audio cable provided. After installing the driver and software, you can begin transferring data using the software provided. Connecting to a PC 1. Connect a USB cable to the USB port on the PC. 2. Connect the other end of the USB cable into the proper terminal on the camcorder. (USB jack) 3. Connect the audio cable to the Line input jack of the PC. If the PC has no Line input jack, connect the audio cable to the MIC input jack. In this case, however, a noise may be produced depending on the PC. Notes: * If you disconnect the USB cable from the PC or the camcorder while transferring, the data transmission will stop and the data may be damaged. * If you connect the USB cable to a PC via a USB HUB or simultaneously connect the USB cable along with other USB devices, the camcorder may not work properly. * In this case, remove the other USB devices from the PC and reconnect the camcorder. Some other Analog Camcorders have a snapshot mode which allows you to take a still photo with your camcorder. However, you cannot transfer these to a computer unless you purchase additional hardware such as a capture card. Some capture cards have analog a/v inputs which will allow you to use the a/v outputs on the camcorder to connect to your pc and transfer images and video. You can purchase a capture card at most computer and electronics stores. Samsung does not support capture cards.

Sep 06, 2005 | Samsung DouCam VP-D5000i Mini DV Digital...

2 Answers

Can I use Firewire to transfer video?


Your computer must be equipped with an IEEE 1394 (Firewire) interface and video capture software. Provided you have both of these, follow the directions below. To connect your digital camcorder to your computer using IEEE1394, follow these steps: 1. Connect the IEEE 1394 interface on your camcorder to the IEEE 1394 interface on your computer. 2. Turn on your computer. 3. Turn on your camcorder. 4. Start the video capture software on the computer. Image capture should begin provided the computer hardware and software are configured correctly. If image capture does not begin, you must consult the computer or capture card manufacturer for assistance. Note: If you don't have an IEEE 1394 interface on your computer, you can buy an IEEE 1394 pci card at your local computer store that will work with most current computers.

Sep 06, 2005 | Samsung DouCam VP-D5000i Mini DV Digital...

Not finding what you are looking for?
Samsung SC-D23 Mini DV Digital Camcorder Logo

229 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Video Cameras Experts

Tony

Level 3 Expert

2598 Answers

Pieter Vleeshouwers

Level 3 Expert

1410 Answers

yadayada
yadayada

Level 3 Expert

60769 Answers

Are you a Samsung Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...