Question about Dayton Electric Heater
I have a dayton kero heater 110,000 btus model 3e2180 . you can turn it on motor runs but will not fire but you can take the top cover off and it fires right up then as you start to put the cover back on it goes out.
OHH I bet this is the same question I just posted to. So it is a forced air kerosene. The usual is like I said a blocked combustion air hole. It could also be something shorting out the spark ignition to ground when replaces inspect the wires and look for a week or loose ground in this case. Sorry about the confusion.
A Bad ignition proving circuit or something like (what we call here dirt dobbers) hornets nest could be letting the flame hit it and not allowing full flow through the heater. Mice are also notorious for making problems like wires chewed and nests in the wrong place. Given where it may have been stored.
Posted on Mar 04, 2009
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jan 09, 2016 | Dayton Electric Heater
Jan 04, 2014 | Dayton Heating & Cooling
Apr 17, 2011 | Reddy Heater-170,000 BTU Kerosene Deluxe
Sep 23, 2010 | Dayton (3E403) Gas Radiator Heater
Jan 23, 2009 | Heating & Cooling
Dec 08, 2008 | Dayton Electric Heater
Nov 25, 2008 | Dayton (4LX41) Heater
206 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: