Question about Gateway Wireless-B Router (wbr-100)
Hello, I am trying to adjust my d-link DWL-810 using my MSI laptop with windows vista so I could use it as a wireless bridge. The instructions are for XP. So to adjust the IP address I have A choice of IPv6 or IPv4. I chose either/or & both with following setting as instructed yet however the laptop is not recognising nor network nor browser192.168.0.30. The IP address I set for laptop was192.168.0.51 & submask 250.250.250.250.0 as the booklet instructs but with no success. Please note that I have disabled the internal WIFI and used the LAN network as instructed. Appreciate if you can help. vbrgds Ray.
Keep the subnetmask 255.255.255.0 it is almost always a default class C address. That subnet mask you are entering technically does not exist. . and make sure IPv4 is on the same subnet ex. ip 192.168.0.31 mask:255.255.255.0
Posted on Jan 15, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Sep 08, 2011 | D-Link DIR-300 Wireless Router
Mar 07, 2011 | D-Link AirPlus G DWL-G730AP Wireless...
Click the link below for proper cable connections in setting up your wireless network.
Then, configure your wireless connection. The following links provides the step by step instructions for each version of Windows:
I hope this works for you. Good Luck!
"Understanding explains better..."
Jan 18, 2011 | Linksys Wireless-N WRT150N Router
Nov 30, 2009 | D-Link DIR-625 (790069292637) Wireless...
Nov 05, 2009 | D-Link DI 514 Wireless Router (DI-514)
Apr 01, 2008 | D-Link RangeBooster G WBR-2310 Wireless...
348 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: