My daughter got the remote when I was busy doing something and I have no idea what she did. I finally realize what she was doing and tried to cut the tv back on. The tv makes a sound when I push the power button but no picture. The little red light blinks 5 times. I got this tv in 2005. I have aleady tried to unplug it. I have also tried to plug it directly in a wall socket. Please help me
An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert that has over 500 points.
An expert who has answered 200 questions.
Re: no picture
blinking lamp means that there is an error inside the set. When it blinks 5 times that means
1) C672 (0,047uF/600V) is bad
2) check the diode D503 (by replacing)
3) something is bad on a 135 Volt rail
If you need more info you can contact me at LIVE session.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
you unplugged the front panel with the buttons on it and the remote reciever
you have to slide the chassis out
reach in to the front and replug the front panel to the plug from the main board
then slide all boards back in place
blue screens are common when your set cant find a signal. might of switched it to video mode .find your menu on the remote and go to cable channels and press the autotune and should find and remember all usable channels
Here's the link to the user manual if you need it;
Check page 9
"If you lose the password, you can cancel the existing password by the following procedure:
- Keep pressing Volume button of the main unit and press ?0? key of remote control simultaneously for a few seconds."
Hope this helps :)
If the power supply IC (MX0842) shorts out, it blows the Sony 0.1 ohm fuse resistor. The set will click but have no sound or picture and the LED will blink 5 times. The power supply should be repaired by someone with experience with Sony TV's.