Question about Canon PowerShot SD1100 IS Digital Camera

1 Answer

Hi wehn i try to open my camera i don't see any picture in the back frame.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Read instruction manual

Posted on Jan 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Canon EOS Rebel T2 - film loaded, but then wouldn't take a picture, the frame count was flashing on screen. What is the problem?


Hi. Open the camera back and pull the film further over towards the pick up spool, close the back and try again to take a photo, i had the same problem with an eos 650 and it always worked.Good luck.

Apr 15, 2014 | Canon EOS Rebel T2 with 28-90 lens 35mm...

1 Answer

Lost handbook, don't know how to transfer pictures from card to picture frame.


My guess would be that your picture frame comes with some sort of cable to hook to the computer or a memory stick that will connect also.

You just need to plug both in and drag the files from the memory card folder to the picture frame folder.

I'm happy to assist further should you need help.

May 07, 2011 | Digital Cameras

1 Answer

Wehn I download my pictures to my computer I can not open about half of the pictures. Some say IMG-0099 (or what ever number), 3,888x2,592 JPEG Image 4.36 MG. These I can open. Others say IMG-0106 (or...


CR2 files are created when you shoot RAW files. Your computer cannot read them without a Canon RAW plugin in whatever image processing software you're using.

Your camera can be set to record in JPEG, RAW or JPEG and RAW.

If you wish to know more about RAW files and their uses, then click here.

I hope this has helped you, if not then please add a comment to explain what additional information you'd like regarding this problem but otherwise please take a moment to rate my answer.

Sep 24, 2010 | Canon Rebel XT / EOS 350D Digital Camera

1 Answer

What does Frame No Full mean?


If you look at the top right of your camera screen when reviewing pictures you should see the frame count. As yours is reading "Frame number full" the count should be reading 999.9999 so you need to reset to 100.0000. How to do this is posted in my tips section of my profile under "THE ONLY WAY I KNOW HOW" I have pasted the section below.
Cheers

FRAME NUMBER FULL!!

If you get this message on screen then your counter has reached 999-9999 and the camera will not take anymore pictures until you reset the counter to 100-0001.

To do this follow the instructions in your manual or read on my friends...

Firstly, make sure you have a picture card inserted into your camera and you have saved any pictures on it to your pc because you are about to format the card inside the camera and you will lose any pictures you have stored on there.

Ok. turn your camera on and press the menu/ok button and select "SETTINGS" from the menu.
Scroll through the menus until you find FORMAT. Select this and you will be asked if you would like to continue. Select OK.
Depending on how large your card is (16mb - 1,2 gb etc) will determine how long this will take but it's not very long.
After you have done this your card is now wiped clean of memory and has been formatted to be used for your cameras software.

Next, select FRAME in the SETTINGS menu and set your camera to RENEW and press OK.
Now come out of your menus and take a picture.

Review the picture taken and check the counter reading in the top right of the screen. It should now read 100-0001. The counter has now been reset.

Now go back into your menu and select SETTINGS again and scroll down to FRAME once again. Set this back to CONT (continuous) and press ok. Your camera should be reset and you can now use it.

Note: If you have more than one card you will have to reformat each card because the camera will store and recognise the frame numbers stored on the card and continue using them rather than set them to 100-0001 or will open a new folder on your card and start using this as the new one thus taking up more space on your card reducing the number of shots you can store on it

Sep 30, 2009 | Fuji FinePix F40fd Digital Camera

1 Answer

Deleting pictures one at a time


turn the power on from the back. do not open shutter. press middle button menu/ok. the first selection to come up is the erase option framed in orange. there will be a trash can at the bottom. then use the button in between the zoom buttons to highlight the frames or all frames option then press ok. that should do it for you.

Jan 01, 2009 | Fuji FinePix A340 Digital Camera

1 Answer

Transferring photo from computer to memory stick


Many cameras will not let you write to the card. Try using a card reader, which will make the memory card appear to the computer as a separate hard drive.

Nov 15, 2008 | Sony Cyber-shot DSC-W50 Digital Camera

1 Answer

Just plain out not working


i've got the same problem. Did you find a solution ???
John

Aug 02, 2008 | Olympus FE-280 Digital Camera

7 Answers

Frame no. full shown on screen. for fuji z10 digital camera. I have deleted a few photos but no change. Regards


just take off the batteries from the cam and hold the power button fr few seconds and insert the battery back to the cam... everything will be rite

May 25, 2008 | Digital Cameras

1 Answer

Print a movie fram


Hi , try to freeze a good frame before you print a picture , you may open to adobe for editing picture there are many option to make picture good and beautiful.

Jan 14, 2008 | Olympus Camedia C-50 Zoom Digital Camera

2 Answers

Memory Card


Format the card in the Camera- read your manual

Jul 31, 2007 | Fuji FinePix A500 Digital Camera

Not finding what you are looking for?
Canon PowerShot SD1100 IS Digital Camera Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Digital Cameras Experts

Doberman

Level 2 Expert

246 Answers

Tony

Level 3 Expert

2598 Answers

halotheracer
halotheracer

Level 2 Expert

68 Answers

Are you a Canon Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...