Question about Google Gmail

1 Answer

Server #008 cannot send email out because server problem #008

Posted by on

  • Anonymous Feb 19, 2009

    When I attach a mvi clip to an email I receive the message ooops a server #008 occured and my message cannot be sent.

  • azmaryahaya Mar 22, 2009

    can't send message

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 94 Answers

If there is an attachment, make sure that it is not more than 20MB.

Also try to clear the cache of your browser.

If still getting the same error, try another browser just to isolate the problem.

Try the following steps if you are using Internet explorer:

  1. Open Internet Options, and click the Advanced tab.
  2. Uncheck the box next to Enable third party browser extensions under the Browsing header.
I hope this helps! Please take a moment to leave a comment if you find this solution helpful. Your feedback is important and very much appreciated.

Posted on Feb 17, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I CANNOT OPEN OR SEND EMAILS


  1. Cannot send email but able to receive
    Typically, POP based email accounts have the same address for incoming and outgoing email servers. However, sometimes the email service provider might have a different outgoing email server which has a different username and password (next point). Please check with your provider for details if you cannot send email but can receive.Is the outgoing email server address correct?
    The outgoing email server (SMTP) address needs to be correct for you to send messages from the account. You can find this information in the email you have received from your web host.

    The outgoing email server address would typically be based on your web site's address, unless the server has been configured differently. Thus, if your web site's URL is www.my-web-site.com, the outgoing email server address would be either my-web-site.com or mail.my-web-site.com (substitute my-web-site.com with your actual domain name).

Apr 26, 2011 | Acer Computers & Internet

Tip

How to Send Anonymous Emails


bbe4318.jpg
Most of us are very curious to know a method to send anonymous emails to our friends for fun. But the question is, is it possible to send anonymous emails in spite of the advanced spam filtering technology adopted by email service provides like Gmail, Yahoo etc? The answer is YES, it is still possible to bypass their spam filters and send anonymous emails to your friends. For example, you can send an email to your friend with the following sender details.
From: Bill Gates <billg@microsoft.com>
The art of sending this kind emails is known as Email Spoofing. In my previous post on How to Send Fake Email I insisted on using your own SMTP server to send anonymous emails. This method used to work successfully in the past, but today it has a very low success rate since Gmail and Yahoo(all major email service providers) blocks the emails that are sent directly from a PC. In this post I have come up with a new way to send anonymous emails (spoofed emails) that has 100% success rate. If you have to successfully send an anonymous email or spoofed email, you should send it using a relay server.
What is a Relay Server?
In simple words, a relay server is an SMTP Server that is trusted by Google or Yahoo as an authorised sender of the email. So, when you send an email using a relay server, the email service providers like Yahoo and Gmail blindly accept the emails and deliver it to the inbox of the recipient. If the SMTP server is not authorised, Google and Yahoo will reject all the emails sent from this SMTP server. This is the reason for which using our own SMTP server to send emails fail.
So What’s Next?
Now all we have to do is, find a trusted SMTP server to Send Spoofed Emails. Usually all the emails that are sent from web hosting providers are trusted and authorised. So, you have to find a free web hosting provider that allows you to send emails. But, most of the free Web Hosts disable the Mail feature and do not allow the users to send emails. This is done just to avoid spamming. However all the paid hosting plans allow you to send any number of emails. Once you find a hosting service that allows to send emails from their servers, it’s just a cakewalk to send anonymous emails. All we have to do is just modify the email headers to insert the spoofed From address field into it.
I have created a PHP script that allows you to send emails from any name and email address of your choice. The script can be found here.
Anonymous Email Sender Script
Here is a step-by-step procedure to setup your own Anonymous Email Sender Script
1. Goto X10 Hosting and register a new account.
2. Download my Anonymous Email Sender Script (sendmail.rar).
3. Login to your FreeWebHostingArea Account and click on File Manager.
4. Upload the sendmail.php, pngimg.php and bg1.PNG files to the server.
5. Set permissions for sendmail.php, pngimg.php and bg1.PNG to 777.
6. Now type the following URL
http://yoursite.x10hosting.com/sendmail.php
NOTE: yoursite must be substituted by the name of the subdomain that you have chosen during the registration process.
7. Use the script to send Anonymous Emails. Enjoy!!!
Tell me whether it worked or not. Please pass your comments…
WARNING: ALL THE INFORMATION PROVIDED IN THIS POST ARE FOR EDUCATIONAL PURPOSE ONLY. I AM NOT RESPONSIBLE FOR ANY MISUSE.
AKPC_IDS += "1016,";Popularity: 7% [?]

on Mar 30, 2010 | Computers & Internet

1 Answer

Server error #008 occurs while sending or saving mail. having scaned attachment


Are you getting this message on your Office?

You might be behind proxy server.. Try to use Firefox instead of Internet Explorer.

You can download firefox from http://www.firefox.com

Apr 11, 2011 | Google Gmail

1 Answer

I am getting an error "oops.. a server error ocurred and your email was not saved (#008)


Hi,

Normally this error comes when you are sending any mail having some attachment.Sometimes when you send an attachment to somebody by Gmail, it will occur an error named 008, this is caused by the size of your attachment, it must be not larger than 25MB, now I will tell you about how to fix Gmail Error 008.

Symptoms:
While signing in or using Gmail, you receive this error:
Oops... (error code ###)


Cause:
A conflict with software on your computer, browser cache that needs to be cleared, or a temporary problem on the Gmail server.



Solution:
Follow the instructions below in the order provided. If they don't resolve your issue, you'll have a chance to report the problem to Gmail.
Which 'Oops...' error code are you receiving?

  • 007
  • 008
  • 009
  • 102
  • 103
  • 500
  • 602
  • 6413
  • Other code
If you see this error when sending an attachment, the attachment may be too large. Please make sure you're sending an attachment less than 20 megabytes (MB) in size.
If you've confirmed that the attachment is less than 20MB, follow the troubleshooting steps below to resolve the issue.
Please select any security applications you have installed for further instructions.

  • BellSouth Internet Security//Here i selected this one
  • eTrust EZ Firewall
  • Freedom Privacy and Security
  • Kerio
  • McAfee
  • Norton
  • Proxomitron
  • Telus
  • ZoneAlarm Pro
  • None of the above
Please disable your BellSouth Popup Blocker by following these steps:
  1. Click Start from your system tray and select Run...
  2. Type cmd and click Okay
  3. Type cd c:Program Files//BellSouth/BellSouth Internet Security and press Enter.
  4. Type regsvr32.exe/u pkr.dll and press Enter
If the above steps didn't resolve the issue, you can see if a browser extension or toolbar may be causing the problem. Browser extensions and toolbars are intended to enhance browser functionality, but they can interfere with Gmail.
Please select any extensions you have installed for further instructions.

  • Better Gmail
  • Firebug
  • None of the above
The Better Gmail browser extension may interfere with Gmail. If you are experiencing problems, please upgrade to Better Gmail 2
If you're still experiencing problems, clearing your browser's cache and cookies can resolve many issues in Gmail. Select your browser below for instructions.
What browser do you use?

  • Google Chrome//Here i selected this one
  • Firefox
  • Internet Explorer
  • Safari
  • None of the above
In Google Chrome for Windows and Linux:
  1. Click the Tools menu tools menu.
  2. Select Options.
  3. Select the Under the Hood tab.
  4. Select Clear browsing data.
  5. Select the "Clear browsing history" checkbox
  6. Use the "Clear data from this period" menu to select the amount of data you want to delete.
  7. Click Clear browsing data.
In Google Chrome for Macs:
  1. Select Chrome > Clear Browsing Data on the menu bar.
  2. Select the "Clear browsing history" checkbox.
  3. Use the "Clear data from this period" menu to select the amount of data you want to delete.
  4. Click Clear Browsing data.
Did this fix the problem?

  • Yes//Here i selected this one
  • No
We're glad to hear your problem has been resolved. Return to Gmail

Sep 13, 2010 | Google Gmail

1 Answer

Cannot connect to subscriber in China


Typically this error indicates that you are trying to send your Adhost email through Adhost’s mail server when you have not authenticated your email account to send mail. Our mail server authenticates you through your pop account. So when you check your email, our mail server authenticates your pop user and password, captures that IP that you are checking your email from, and adds that IP to our relay list. This list is flushed every 70 minutes. This means, if you try to send email after the relay list has been flushed and before you’ve attempted to check your email, you will receive this error.


How to fix the problem:

Fix #1 - reauthenticate on our server.

Remove any email from your Outbox. If you need to keep the message, you can move it to your 'Drafts' folder.
Click "Send/Receive". This will reauthenticate you.
Try resending the email.
Fix #2 - configure your email client to check for email before sending.

In Outlook, go to "Tools" and select "Email Accounts". Make sure "View or change existing e-mail accounts" is checked. Click Next.
Select your account from the list and click "Change".
Select "More Settings".
Select "Outgoing Server".
Check "My outgoing server (SMTP) requires authentication".
Select "Log on to incoming mail server before sending mail".
Click "OK", then "Next", then "Finish".

This will fix your problem
Or
Call Yahoo! Customer Service

USA: 1-866-562-7219 --- 1-800-318-0631
UK 020 7131 1000
Canada: 1-877-722 3755
Direct Number: 1-408-349-1572

Regards
manish

Mar 20, 2010 | Yahoo Mail

1 Answer

Gmail Error code # 008 OOps error while sending


Hi!
When ever iam trying to send any attachments to some id it is taking
time ,and at last iam getting a error message as
Oops.....the system was unable to perform your operation error code
008 please try again in few seceonds
pl help me how tp solve this problem this problem is comming since
morning
raju

Dec 24, 2009 | Google Gmail

1 Answer

The host 'reynolds4242' could not be found. Please verify that you have entered the server name correctly. Subject 'hi', Account: 'reynolds4242', Server: 'reynolds4242', Protocol: SMTP, Port: 25,...


Seems you are using outlook to send your email. You might just have clicked their "mailto" linked that's why outlook popped up with the recipient's already written.

If you don't have your own email account, you can't you outlook to send email. You better sign up with yahoo mail or google mail then continue sending your email.

Anyhow, if you have your own email account, you must have setup your POP3 mail server and SMTP mail server correctly. It somewhat looks like this:

POP3 mail server: mail.yourdomainname.com
SMTP: mail.yourdomainname.com

Regards!

Jul 11, 2009 | Computers & Internet

3 Answers

Error code-008


Iam unable to send email from my computer. It is telling oops unable to perform your request.error code-008. please solve my problem-sumanthkumar

Apr 15, 2008 | Microsoft Windows Xp Home Edition English...

Not finding what you are looking for?
Google Gmail Logo

Related Topics:

403 people viewed this question

Ask a Question

Usually answered in minutes!

Top Google Computers & Internet Experts

kakima

Level 3 Expert

102366 Answers

Robet
Robet

Level 2 Expert

29 Answers

Richard Solanski
Richard Solanski

Level 1 Expert

8 Answers

Are you a Google Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...