An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 500 times.
Re: change the time displayed on the Panasonic KXT7433
This phone is used with a Panasonic digital phone system, and the date and time are set in the control unit, not the phone. The phone just displays the system time. You'll need to check the manual for the service unit to see about time setting.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
PanasonicKX-E3000. Operator's ... accessories recommended in these operating instructions or supplied by the ... typing with one ofthe most advanced electronic typewriters available... 0 Storing Margin Formats ln Memory ..... Set the first TAB at 20.
You have one, press the INFO button up to 3 times and your extension number will show on the display. A 6-line display phone is pretty unusual to be moving from one place to another as it's the control phone. If it was the only one in your system, MOVE IT BACK.
There is a manager's guide in the Operating Manual for your system that will give the instructions for changing extension numbers. It starts by going into manager programming (PROG **1234) and choosing program 004. In Panasonic land, you don't "swap" extenson numbers, you do a double change as in change 102 to 200 105 to 102 and 200 to 102.
The TDA/NCP system time is changed from the phone allowed programming. It can be one or all, but the main phone (ext 101) can do it. When you find the one that works, press PROGRAM **1234 If it doesn't work, then you don't have the right phone. When it says Sys Pgn No? dial 000. Then use the NEXT, keypad, and ENTER keys to change your date and time..
Just pick up the handset and drop it back down to exit programming