Question about Toshiba e-Studio 161 Copier Copier

1 Answer

Can't print or copy with my toshiba e studio 161

It displays on the lcd sdreen a error code H2.
What can i do?

Posted by on

  • crum01 Jan 26, 2009

    H2 code

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Toshiba Master
  • 524 Answers

H2 indicates thermistor open.

U can enter simulation mode and input "14" to clear the message.

If happen again, u need to check following:
Thermistor
Control PWB
Fusing section connector disconnection
The fusing unit is not installed.

Perform the following procedure to enter the simulation mode.
"C" key AUTO/TEXT/PHOTO key
"C" key AUTO/TEXT/PHOTO key
Main code Start key Sub code Start key
(Note:Perform the first four key strokes quickly allowing no more than one
second between key strokes.)


Posted on Apr 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset Toshiba e-Studio 161 Copier Copier with "error code H4"


Step 1:-
Press
"C" key AUTO/TEXT/PHOTO key
"C" key AUTO/TEXT/PHOTO Key
(Note:Perform the first two key strokes quickly )

Machine display should stop blinking
Now press 14 and press start button.
Switch off and on to check

Feb 27, 2016 | Toshiba Office Equipment & Supplies

1 Answer

Why does my toshiba e-studio 161 prints black?


The scanner unit is damaged. Check for busted exposure lamp while making scans. There should be light on the glass where you put the original copies while scanning for copies ..

Jul 22, 2014 | Toshiba e-Studio 161 Copier Copier

2 Answers

Estudio 161 4h error code


h4 low heat from heater unit do the following [c key]-[auto/text/photo key]-[c key]-[auto/text/photo key] machine will go dead key in 14 press print machine will cycle if the error code returns you will have to replace thermistors and thermofuse

Mar 19, 2011 | Toshiba E-Studio 161 Copier

1 Answer

I have H2 flashing on my Toshiba e-studio 161 copier


h2 error is the fuser unit is faulty check and replace heater lamp thermo fuse and thermistor

Mar 07, 2011 | Toshiba e-Studio 161 Copier Copier

3 Answers

TOSHIBA E-STUDIO 161 error code show mw H and 4


Hi,
How are you this is jack my id jack_pak@hotmail.com
your copier toshiba 161 show H...4

Dear, Follow the procedure.... press C(CLEAR) BUTON+ PHOTO BUTON+C BUTON+PHOTO BUTON..... Your copier enter special mode
Then you press 14 and start key.... copier ...ok
PLEASE VOTE ME
Thanks,
Best Regards,

Aug 31, 2010 | Toshiba e-Studio 161 Copier Copier

2 Answers

Toshiba e-studio 161 error code H2?What reset problems?


does not solve these problems H2? substituted for the other thermistors, but still nothing same error ... The whole problem of the scheme not remove the plug from the power supply and printer cable recorded the error, which now does not solve ... help ??????

Jan 12, 2010 | Toshiba e-Studio 161 Copier Copier

2 Answers

Error code H2 on screen


Hello sir; H2 code require reset procedure as follow;
1, press "#", "interupt", "c", "interupt" these 4 keys.
2, enter 14 then press start.
3, turn power off and back on .

Jan 28, 2009 | Toshiba e-Studio 161 Copier Copier

1 Answer

Toshiba e-studio161


i cant understand your language. but the problem is H2, you have to reset the error cord.press this keys "C"key and "auto/text/photo" key and  "C" key and "auto/text/photo" key. and after panel is gone. type 14 and press start key.after press twice yellow button.

Sep 13, 2008 | Toshiba e-Studio 161 Copier Copier

Not finding what you are looking for?
Toshiba e-Studio 161 Copier Copier Logo

331 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

pkwc

Level 2 Expert

254 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Toshiba Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...