Question about Motherboards

1 Answer

I am getting an error suddenly as stop :0x0000008E(0xC0000005,0x896F18E8,0xA84A875C,0x00000000)

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 50 Answers

First turn off your pc, open the right panel of your mobo and locate the memory and clean it with an eraser, a pencil eraser. then turn on your pc.

if the problem goes again, reset your processor and clean your processor socket with a paint brush and your processor with an eraser, a pencil eraser, be sure to touch gently the processor. then turn on your pc, and see if it backs to normal again.

if the problem persist, just reformat your hardisk and make a backup of your important files.

Note: if you don't know how to do one of these tips, just have your pc repair by a professional computer technician.

Good luck!

Posted on Jan 15, 2009

1 Suggested Answer

  • 2246 Answers

SOURCE: stop 0x0000008e (0xc0000005, 0x8054BAB4, 0xF43c3844,

you need to reinstall your windows, because your computer problem is dumping disk that cause your windows corrupt

i hope this helpful
thank you for using fixya

Posted on Feb 11, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Stop 0x0000008e (0xc0000005, 0x8054BAB4, 0xF43c3844, 0x00000000) beginning dump of physical memory physical memory dump complete


you need to reinstall your windows, because your computer problem is dumping disk that cause your windows corrupt

i hope this helpful
thank you for using fixya

Feb 11, 2011 | ASUS P4S533-MX MB, DDR+SDR/ VGA/ Audio/...

1 Answer

My computer with Windows XP Pro SP2 is crashing often, after i had connected a hdd with my computer ============ CPU-Z TXT Report Processors...


probably itz either minor case of software corruption/improper ground/cpu fan..
or major case of faulty or defective main board/ram/hdd..

..plz do check the following as in order:..
the Hardware part:..
1)see if the ram(s) is loose/faulty..open clean/remove carbon & or oxide formed on the teeth with an eraser n resit it..or replace with a standby n see..

2) 4) a) see if ur hdd is noisy or emitting any 'ticking' noise (like 'tuk tuk' or 'kirr kirr')..
b) or if the system is not supporting either the newly installed device or itz software/driver /firmware
if so, u need either a fresh os installation or ur hdd is likely to b replaced..

3)remove/clean dust neatly..dust is non-uniform in nature n may cause jam/short circuitry/excess resistance n many more..resulting an increase in heat..

4) open the CPU Heat-Sink with fan out of the socket..put some "Heat Sink Compound" (available in local electronics chip level spare market) between the cpu/processor and the CPU Heat Sink *** fan..resit/fit it tightly in position..

5) on main/mother board..see with a debug card for mb error..may b short..look for defective capacitors(esp above1000mfd)/mosfets..go through the mb's south bridge n the circuit lie around atx connector..the crystal clock generator (if cpu isn't heating up)....

the Software part:..
1) hv a licensed and UPDATED antivirus installed (i prefer avg/kaspersky,remember, without updation a full version antivirus is useless)..

2) download, install n run microsoft kb890830..http://www.microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en..

3) download n run Startup Control Panel..http://download.cnet.com/Startup-Control-Panel/3000-2094_4-10039330.html..'remove all the unnecessary startup items from here..(if u can't find what to remove, post me/us in ur comment with all the items listed in each n every tabs herein)..

4) remove all unnecessary software from add/remove programs..

5) download, install n run 'Advanced System Care Pro'..http://download.cnet.com/Advanced-SystemCare-Pro/3000-2086_4-10399324.html..

6)disable the following:..
a) 'Automatically Restart' right click on my computer->properties->advanced->startup n recovery->(uncheck on the) Automatically Restart;
b)'Error Reporting' right click on my computer->properties->advanced->error reporting->disable error reporting->(uncheck on the) 'but notify me when critical error occur'..

7) Increase the size of Virtual Memory, Initial: 1440; Maximum: 2880

if u r bot a professional, always better to seek advise from ur system admin/vendor....

Nov 13, 2009 | Asrock K8NF4G-SATA2 Motherboard

2 Answers

Installaion error


First make sure thats what you want to do since xp is no longer made. If you still want to go ahead you have to make sure you have the complete install and directions. You will have to remove vista first. But check the specs if you bought the computer with vista already installed you will not have the right drivers in your computer to go backwards in versions. Good luck. The reason the error comes up is that the install is trying to remove a component that is needed for your computer to operate. If you had xp and updated to vista, depending on how it was installed it would have removed the xp driver when updating.

Sep 05, 2009 | Foxconn K7S741GXMG-6L Motherboard

2 Answers

Swapped hard drive into new casw and now it wont boot up


This is due to a hardware conflict.
The system drivers on the hard drive are for the old mother board and devices,You will have to reinstall OS while it is install on the new mother board,The computer cannot boot to a drive that is loaded to another system unless all the devices and drive are identical.

Please rate this a fixya

Feb 13, 2009 | EliteGroup 848P-A Motherboard

1 Answer

Blue Screen of Death


Click on the link below to go to this specific error on the Microsoft Support website:

http://support.microsoft.com/kb/314063/en-us

Oct 15, 2008 | Evga nForce 680i SLI (122CKNF68)...

1 Answer

BSOD- STOP error message


most bios updates are found on the compaq website, they need to usually uncompress to a 3.5 floppy or they are auto-installing programs u get from the website, your issue however sounds to me more like a corrupted version of windows, did you try a fresh installation with the recovery cds or master disks?

Aug 12, 2008 | Intel Motherboard

Not finding what you are looking for?
Motherboards Logo

Related Topics:

408 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Mark Taylor
Mark Taylor

Level 3 Expert

728 Answers

Are you a Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...