Question about Canon PIXMA MX310 All-In-One Printer

2 Answers

13D8 I have minolta cf 2002 machine, which i have recently bought it. i have problem 13D8. please give me the solution of this problem. Thanks.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 87 Answers

This code is caused by a data download error :
A fault occurs while the LPH correction data is being downloaded
from the Black LPH EEPROM to the flash memory on PWB-PIC
when power is turned ON.
Check the cable harness between LPH and PWB-LED, also between PWB-LED and PWB-PIC. If these are not faulty/loose then a change of LPH or PWB will be required.

Hope this helps.

Posted on Apr 11, 2011

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a prolem with of code 13D8 (LPH Download) of Minolta CF2002

Posted on Jan 28, 2009

  • SAFEE Jan 28, 2009

    please give the solution of above problem our email adress is

    Young_asif@yahoo.com

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

0500 error dialta cf 2002


open front door lay on your back look for the small hole on the right side touch the small switch with a screwdriver to reset the machine must be on

Jan 16, 2014 | Minolta DiALTA Di520 Laser Printer

1 Answer

I have a Minolta Di151 copier-printer that I use for printing from my desktop & photocopying. I recently bought a new computer - a Dell Optiplex 380, with Windows 7, and cannot get the Minolta to...


Unfortunately, you are out of luck on Windows 7 or even Vista for that matter as Minolta had discontinued support of that machine years ago. The Di151 is now over 10 years old and that makes getting support or parts much more difficult. I have sold and service Minoltas since 1983 so I am very familiar with your machine as well as your situation. I wish there were better news I could give you.
Good Luck and Thank You for using Fixya.
Wheatland Services

Feb 06, 2011 | Printers & Copiers

1 Answer

I have a Konica Minolta pagepro 1350W printer. I


Please diregard. Since I was using an aftermarket toner cartridge, I took a chance and bought an OEM cartridge and... voila... it's working fine. Apparently, all I had was a bad cartridge.

Oct 07, 2009 | Konica Minolta PagePro 1350W Laser Printer

1 Answer

Magenta smear over half the page Minolta CF 3102


i would start with replacing the magenta image unit yes

Sep 29, 2009 | Konica Minolta Printers & Copiers

1 Answer

What causes the cf 910 to give c0000 and c0042


Hi

Thanks for using FixYa. Error C0000 means Main Motor’s failure to turn and error C0042 means Fusing Cooling Fan Motor failure to turn.
These errors can be due to your fuser getting stuck. Sometimes the upper and lower rollers get stuck together, or a flat spot may develop on the lower roller. Check the fuser rollers, replace if faulty.

Please do rate the solution & revert for further assistance.

Thanks
Rylee

Jul 31, 2009 | Konica Minolta Printers & Copiers

1 Answer

Printing #10 Envelopes in a Minolta CF 2002


You can print #10 envelopes in ANY printer. Use the bypass (or multi purpose tray).

May 04, 2009 | Minolta CF2001 Copier

2 Answers

Problem in configuring IP address in Konica Minolta bizhub 210 Copier, Printer, Fax


Is there network card is installed in it, if yes then you can configure it with your network go to machine Manu in machine control panel and the in network settings here you can give the IP address and subnet mask after then reboot the machine.
If network card is no installed behind the machine then you can use its built-in USB or and parallel printer without NIC card.

Feb 01, 2008 | Konica Minolta bizhub 250 All-In-One Laser...

4 Answers

Minolta CF900 Photocopier


CODE C0900, DOES NOT PASS COPY, FIERY FRONT COVER BROKEN OFF AND VERY DIRTY, also you may want to try and look at the 3rd drawer lift perheps there's somthing blocking it

Aug 29, 2007 | Konica Minolta DiALTA CF910 Copier

Not finding what you are looking for?
Canon PIXMA MX310 All-In-One Printer Logo

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts

kakima

Level 3 Expert

96396 Answers

old marine
old marine

Level 3 Expert

1461 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...