Question about Cobra 29 LTD CB Radio

1 Answer

I purchased a s500 Talk-Back speaker. There was not paperwork included with the speaker. Which wire is the PA. I am thinking it is the small red wire. Also: in order to use the Blue Tooth function of the 29ltd BT must I have a bluetooth microphone. It appears, from the literature, that it is not necessarily required. The radio was very recently purchased and has not yet been installed.

Posted by on

  • ken_br1 Jan 17, 2009

    Thanks for the response Jay. As it turned out the Talk-back speaker that we were installing was bad out of the box. We exchanged it for another and all is fine. However your response was right on target.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

It is the small red wire that goes in the PA, or you can just ground this wire. The bluetooth will work through the stock microphone.The external mic is for handsfree use.

Posted on Jan 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Uniden 40-Channel CB Radio (PRO505XL) "PA" acts like an extra external speaker!


because when you switch to PA it is because you are on the outside of your vehicle.When another party calls you ,you can hear them and then go to your vehicle flip it to cb and talk to your party.

Jul 07, 2014 | Uniden Pro505xl 40 Channel Cb Radio

1 Answer

How use pa system


All the 8 ohm's means is that you need to use an 8 ohm speaker for optimum performance. That is what the radio is set up for. Most small PA speakers for auto etc, are 8 ohm's.

Jun 02, 2014 | Uniden Radio Communications

2 Answers

CB Plays out PA Speaker


Are you following the user manual that came with the radio?
NB-ANL/CB/PA SWITCH: When the switch is in the NB/ANL position, the Noise Blanker (NB) and Automatic Noise Limiter (ANL) circuits are activated.
The Noise Blanker is very effective in eliminating repetitive impulse noise such as ignition interference. In the CB position, the PA function is disabled and the radio will transmit and receive on the speaker that is connected. In the PA position,
the radio acts as public address amplifier. Your voice will come out of the speaker that is plugged into the PA. SP. jack on the rear panel. The radio does not operate when you are in the PA mode.

When you plug a speaker into the ext. jack does it kill the radios internal speaker? It should until you unplug it; if not and you are following the about you may have a wiring issue with the jacks.

May 04, 2014 | Radio Communications

1 Answer

Midland 9001Z How To Add Talk Back Mod


great radio but I own one and never again will I get one . To add talk back you must take off the top cover,solder a 33 ohm resistor across the pa and the external speaker outputs. If it doesn't work then try another resistor but this is the way to do it . If you want it on a variable then you attach two wires from each side of the resistor to a switch and you have it. I'm trying to get rid of mine but nobody wants to buy it.cheap.

Feb 20, 2014 | Midland Radio Guardian CB Radio, Model...

1 Answer

How to hook up a pa speaker to a uniden vhf


Hi
From the owner's manual (link below) Page 5.
To wire the PA speaker, use the orange (+) and black (-) wires.

-Steve


http://www.uniden.com/pdf/SOLARA%20DSC-BKom.pdf

Mar 21, 2013 | Uniden Solara Vhf Dsc Fixed Mount Radio

1 Answer

How do you wire a PA speaker to a Cobra 19 CB radio? I know this is broad yet nothing has worked including using a 6' 3.5mm mono audio cable with tinned ends and connecting the pa speakers wires with the...


  1. www.cbmonitor.cz/...manualy/Cobra/Cobra%2019%20Ultra%20III%20manual.pdf
    pdf.textfiles.com/manuals/.../Cobra_19%20Ultra-II%20CB%20Tranciever_Manual.pdf -

    User manual. www.cbtricks.com/radios/cobra/7_ultra/graphics/cobra_7ultra_sm.pdf

    usually, you connect up the PA,ans switch, it on and talk, it will not go unless selected. use the maual to help.

May 05, 2010 | Cobra 19 Ultra II CB Radio

1 Answer

Need a manual for Technics Receiver SA-160


Go and google it as you can buy it on line ... how tough can it be the hook up speaker wires? The small speakers are front and back, left and right in pairs. red wire to red jack on back , black wire to black jack. big speaker goes to sub wolf. jack in back. Now get those wires and play your Christmas music. note jacks may be marked fr fl rr rl sub

Dec 10, 2009 | Audio Players & Recorders

2 Answers

Cobra 29 ltd chrome quit transmiting still have pa and talk back changed driver and final still nothing any ideas


Have you check your voltage regulator. 2 outer legs should read 13 volts middle 9 volt. Around and about.

Nov 15, 2009 | Cobra 29 LTD CB Radio

1 Answer

We have a dbx Driverack PA unit with a Crown CDi1000 amp in our church. Recently, we starting having problems with the output to our main speakers dropping out. We found (by accident) that if we unplugged...


Check the speaker wires coming out of your amp. Chances are you have a problem with a speaker wire and this is just a coincidence. I say this because the same thing happened to me during a live show and I about had a heart attack. We lost the front of house for about 15 minutes while I tried to troubleshoot the Driverack, the board, and everything but the speakers and speaker wires. The cables were a recent purchase and were premium grade with light wear so I mistakenly ruled them out. It was intermittant so it took me a while to figure out. Now I understand that that's the weakest link in the chain and from now on I start there and work backward through the chain (that is, if all sound is cutting out).

Do you use banana plugs (two metal pegs sticking out of a plastic rectagle) coming out of the back of your amp? There are little screws inside the holes on the back of the banana plugs. Those can vibrate loose, especially if they're just factory tight. Get a little standard screwdriver and tighten them down. That will probably solve your problem.

Okay, wait a minute -- could be one more thing. You mention that the loud popping can be heard. Do you have any gates turned on? Most compressors have gates. Check your compressors to see if you have your gates turned up too high. A gate set too high would allow the loud pop to go through to the PA but would cut off everything low to mid-volume.

I guess you can see that I don't think it's a problem with the Driverack. I don't work for dbx or anything, I just think these other things are far more likely than a problem with the unit.


Jan 02, 2009 | DBX Driverack-Pa Eq/Speaker Control System...

Not finding what you are looking for?
Cobra 29 LTD CB Radio Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cobra Radio Communications Experts

AnyMHz.com
AnyMHz.com

Level 2 Expert

500 Answers

Iron
Iron

Level 3 Expert

3018 Answers

Brad Brown

Level 3 Expert

15111 Answers

Are you a Cobra Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...