Question about Kenmore 82822 Electric Dryer

1 Answer

I have a Whirlpool Duet Sport dryer. The light bulb blew & now the dryer will not start. When the start button is pushed, there are 3 beeps. Can the dryer run without a bulb in place or does it need to be replaced before it will run?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

It appears your timer/main controller/CCU has failed in this instance.

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix my drier when all it does is beep three times when I push the start button but will not start?


Try to look if the cable is unplug or something is placed wrong or if it might be a mouse that is biting the wire .thanks for my opinion.

Jan 10, 2015 | Whirlpool Dryers

1 Answer

The light on my whirlpool duet dryer keeps blinking on all settings, won't start


push power button on push any cycle button hold down 3-5 seconds release push 4-5 times . if that don't fix it unplug for 30 min try that. let me know if it works might check lint trap also

Mar 18, 2013 | Dryers

1 Answer

Cycle light flashing. won't let it start. when i hit start button it beeps 2 times quickly


Hello,

Very common issue, check the door switch when you press it in you should hear a click, If you have a volt meter we can walk you through this repair.

http://www.appliancerepairlesson.com/

Mar 01, 2011 | Whirlpool Duet Sport 6.7 Cu. Ft. Gas Dryer

1 Answer

Start button will not initiate on cycle. Get 3 beeps.


Hi,
There can be many reasons why your dryer2_bing.gif will not turn...

This tip that I wrote will help you to figure out what is happening...

Dryer2_bing.gif Repair - The Dryer2_bing.gif is not Turning
http://www.fixya.com/support/r4422207-dryer_repair_dryer_not_turning

Dryer2_bing.gif Repair ? The dryer2_bing.gif will not start
http://www.fixya.com/support/r4460438-dryer_repair_dryer_will_not_start


heatman101

Jun 20, 2010 | Whirlpool GEW9250 Electric Dryer

1 Answer

Dryer will not start.


Check your door switch. It sounds like the door switch is not engaging (closing properly). If the switch contacts stay open, the interior light stays on the dryer will beep when you attempt to start it. This is the push button toggle switch on the door frame. This is a common symptom of this problem.

Open the door and push in on the switch, If the switch is working properly, the light will go out. If it doesn't, you will need to make sure the switch is not loose. Next, check the wires leading to the switch to make sure they are not loose, broken or grounded to the case anywhere. If all the wiring checks good, you will need to replace the switch. This is a very simple repair. Let me know if you require further assistance. I hope this helps you.

Oct 16, 2008 | Whirlpool Dryers

4 Answers

Won't start, just beeps - sounds like door switch problem others have had


The three short beeps could be part of the fault code. Check the owners manual and there are diagnostic sheets on the inside of the machine. I cannot find this fault code in my data base. What is the Model and Serial Number of your Dryer. Check the Power inside the machine at the power cord power connections. You should have 120V from both power terminals to the common terminal. There should be 240 Volts across the main power terminal. Another quest replaced the power cord. Hope to hear some good news soon.
InMrFixIt.

Aug 12, 2008 | Kenmore Elite HE4 Electric Dryer

3 Answers

Whirlpool Duet Dryer


My dryer did the same thing, all the lights worked on front, but the bulb was out inside. All I had to do was to replace the thermal fuse and replace the bulb if you want light. The bulb don't have to work in order to dry clothes

Jan 03, 2008 | Whirlpool GEW9250 Electric Dryer

Not finding what you are looking for?
Kenmore 82822 Electric Dryer Logo

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Tim Whalen

Level 3 Expert

3056 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Kenmore Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...