Question about Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

2 Answers

Fisher paykel will not start

My Fisher &Paykel bottom drawer has decided to not start. It has power, and I can change the settings but the atart button does not start it, I just get a rapid series of beeps followed by one lowere toned beep. Help!

Posted by on


2 Answers

Thanks for the info. I determined it was the door close switch, which it was, and I can tell from compartive experience that going in through the back panel is much easier than going in from the drawer. Another thing I learned is that FP parts are relatively inexpensive if ordered direct from FP through their 888-936-7872 number; an LCD panel was $65 which includes the shipping charges. Thanks again, Harry

Posted on Aug 04, 2007

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 84 Answers

Hi buddhaboy....The following URL will take you directly to the Fisher & Paykel Troubleshooting Guide that addresses your specific issues. Also, if you no longer have your User's guide, a copy may be downloaded by clicking on the following URL: I hope their information works miracles for you...good luck my friend

Posted on Aug 03, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Fisher & Paykel dishwasher top drawer is filling up with water when bottom drawer is ran.

It is the drain water from bottom drawer that is finding its way to the top drawer. This could be due to incorrect drain hose height. Check in installation manual. Alternatively you will have to buy an air gap kit and connect the two drain hoses separately to the kitchen sink.

Mar 22, 2014 | Fisher and Paykel Dishwashers

1 Answer

Fisher paykel cross draining

As the drawers share a common outlet to the kitchen sink drain, it is the drain water from bottom drawer going to top drawer. Can happen if the drain hoses are not following the correct specifications for installation. An air gap kit is available to solve the problems.


Mar 22, 2014 | Fisher and Paykel Dishwashers

1 Answer

F1 error on Fisher and Paykel Dish Drawer

Sorry did not see your problem report earlier. If you have checked the sensor under the bottom drawer and it is dry, then F1 is caused by top drawer power filter fault. This means the bottom drawer controller is giving the F1 error but the top drawer controller has no power. Can you confirm this.

Apr 08, 2013 | Fisher and Paykel 23 in. DD-603SS Built-in...

1 Answer

Fisher and paykel DD603 has no power

If both drawers have no power and the mains supply is ok, then the power filter board at the base of the dishwasher (under bottom drawer) is faulty.

Apr 01, 2013 | Fisher and Paykel 24 in. DD603H W Built-in...

2 Answers

Change Fuse on Fisher Paykel Dishdrawer

I have a single drawer F&P dishwasher. This morning a safety switch trigged. This afternoon when I went to use the dishwasher found that it had no power. There are no lights and there was a smell of something burning. The power outlet has power. Can you help?

Feb 08, 2010 | Fisher and Paykel 24 in. DD603H W Built-in...

1 Answer

I have a Fisher Paykel dishwasher with water in top drawer

You need a Air gap kit designed by Fisher and Paykel to address this problem. It is pricey but it is worthy. I used this and very happy with it since no back flow problem from one while other running. Here is a link to order it.

Dec 12, 2009 | Fisher and Paykel 23 in. DD-603 Built-in...

1 Answer

Fisher and Paykel dishdrawer, lid not retracting, no power.

By no power you may be implying there is no display etc and the swithces are not working. Most likely the controller of the top drawer has had it. The controller is mounted on the front of the drawer behind the door panel. Hope things are better than that.

Oct 16, 2009 | Fisher and Paykel 23 in. DD-603SS Built-in...

Not finding what you are looking for?
Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher Logo

421 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Brian Coughlan

Level 2 Expert

279 Answers

Owen Barnes

Level 3 Expert

867 Answers

Are you a Fisher and Paykel Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides