Question about Energry Speakers Energy Speakers Encore 8 Subwoofer

Open Question

Subwoofer not working

Denon AVR 2708 revr with EnerG Encore 8 Sub.....no sound. When I plug into the sub, the power LED goes out??

Posted by on

2 Suggested Answers

  • 3 Answers

SOURCE: Encore subwoofer not getting any power

Might be a power supply for the amp. Are you handy with a VOM? You can check the power supply output pretty easily. If not, some local electronics repair guys will diagnose / estimate repairs for free .. especially if you already have the unit apart (just did that very thing myself). Then you can make the choice of repair / replace.

Good luck.

Posted on Feb 27, 2008

  • 54 Answers

SOURCE: Fuse keeps blowing?

The fuse is a protective device. Fuses dont blow unless the amp ( in your case ) is drawing too much current. DO NOT put a bigger fuse in. Obviously, there is a problem with the amplifier inside the sub. If the sub is under warranty, send it in for repair to an authorized warranty depot. If not it's not under warranty, then take it to the authorized warranty depot anyway. Why ? because they will have the schematics ( electrical diagrams ) to troubleshoot the unit quickly and it may be a common problem. If it is a common problem, the factory may have released a modification and possibly it could be covered under warranty under a factory 'goodwill' program. Good luck. Rob

Posted on Mar 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi ive got a b&w as2 subwoofer but theres no sound? the power light works but my denon recievers not picking up the sub is there a fuse in the sub which may have blown ive tried all the settings on...


Are you running this subwoofer via an LFE (RCA line level) connection, or via high level (speaker lines in and out of the subwoofer)? There may be different ways to hook up this unit and it would be helpful to know how you have the unit connected. Thanks!

May 04, 2011 | B&W Audio Players & Recorders

1 Answer

Bought newer Denon reciever does not have speaker wire hookups only subwoofer outlet. will my PV 350 still work


What model Denon? The BA Sub is self-powered so it would accept a Line level Subwoofer feed as well as a speaker level feed (choose one only). Look for a Sub Out RCA jack.

You could look in the manual, which is at retrevo.com for free after you register.

Feb 22, 2010 | Boston Acoustics PV350 Subwoofer

1 Answer

I am planning on buying Denon AVR 1909 receiver. Can hook it up with Bose Acoustimass 6 speakers. DOes the Denon blow up the small bose speakers. If yes how do i hook them up.


on the am 6 by bose you have to use all the supplied cables or you will blow them. the way it works is that all the speaker signal/power from the denon goes directly to the sub, then the sub sends the signal to each speaker. if you do this correctly the sub takes what it needs and sends the rest to the smaller speakers. and you wont blow them unless you hook them directly to your reciever.

Jul 30, 2009 | Audio Players & Recorders

1 Answer

Denon / MK Sub Hookup


you can do this one of two ways, you can use just the left "mono" on your sub or use a y connector. If the sub doesn't show the left as mono then YES you need a y cable

Apr 10, 2009 | Sony SA-WM20 Subwoofer

2 Answers

Can't get my Accurian subwoofer to work


Sounds like you have everything hooked up properly. Make sure the outlet is providing AC power to the sub. Check the power switch on the sub.

If it is not working still; bring it back and swap it for another one before you warranty runs out.

Jan 28, 2009 | Audio Players & Recorders

2 Answers

Subwoofer goes to sleep


The receiver automatic speaker set-up set the sub volume at -12 and since it was not getting any signals from the receiver it was doing what it is supposed to be doing (going to the standby mode). This was troubleshooted by Onkyo tech support on a Sunday. All the best about Onkyo customer support.

Apr 12, 2008 | Audio Players & Recorders

2 Answers

I have no amp for jamo 1060 sub


Dual Voice-Coil
The unique Dual Voice-Coil design allows both left and right channel sound from just one speaker. Simply hook up both the left and the right channels to the special terminals on the speaker. Hook up one channel only, if the speaker is to be used in a conventional stereo set-up.
I found this on jamo site hope that will help you

Mar 15, 2008 | Jamo 1060 SW Speaker

2 Answers

Sony Active Subwoofer noise


The circuit that should be turning the sub on and off based upon the presence of an audio signal is not working correctly and the sub is trying to reproduce 60 cycle hum. The unit needs service.
Dan

Mar 09, 2008 | Audio Players & Recorders

2 Answers

Subwoofer just stopped working. There's power but no sound.


I have the same problem. My guess is that the subwoofer coil is messed up. You MIGHT have to get it recoiled. But before you do any of that get someone with a sub to play their sub in your car, if it works.... then your sub is messed up, if not.....then your amp is messed up ( trial and error ). Today i noticed my subs rubber surrounding is crooked, that may be the problem for me. Also when I press down on the sub it makes a sticking sound, like something came loose. So once i get everything opened and out ill let you all know the solution. Good Luck!

Jan 05, 2008 | Jensen JS1000-A Subwoofer

Not finding what you are looking for?
Energry Speakers Energy Speakers Encore 8 Subwoofer Logo

Related Topics:

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Energry Speakers Audio Players & Recorders Experts

Rob
Rob

Level 2 Expert

57 Answers

Michael Edwards
Michael Edwards

Level 1 Expert

53 Answers

Are you an Energry Speakers Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...