- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The power switch connects to the PWR PT pins. The speaker hooks to the SPEAK pins (only the outer pins actually used). The HDD LED connector hooks to the HLED pins. There is usually one red and one white wire. The RED wire goes to the "+" pin. The power LED wires hook to the PLED Pins. There is usually a green and a white wire. The GREEN sire goes to the "+" pin. The GLED pins are for the SLEEP switch if you case has one. The RST pins are for the RESET switch wires (if your case has one). Hope that helps
-Supports Socket 478 Intel Pentium 4, Celeron with 400/.533 MHz FSB
-VIA P4M266A + VT8235 Chipsets
-DDR 200/266 SDRAM, 2 x 184 – pin DIMM, Up to 2 GB
-2 x ATA 133
-4 X AGP device, 2 PCI slots, 1 CNR slot
-Onboard AC97 audio two channels
-Onboard S3 Pro-Savage 3D Graphics
-Onboard VIA VT6103 10/100 Fast Ethernet (MV43VN only)
-6x USB 2.0
-Micro ATX Form Factor The your motherboard has an ethernet adapter all you need to do is download the drivers for the ethernet adapter and install them. here is the link : http://members.driverguide.com/driver/detail.php?driverid=206328 do a free subscription first. cheers