Question about Cell Phones

4 Answers

Can't pair my new Samsung Hands-Free speakerphone with my moto V9

I just got a Samsung HKT-450 hands-free speakerphone and have tried to pair it with my Motorola V9 cell phone. the instructions that came with the HKT450 said to enter "0000", didn't work. I tried 1234, 1111, 9999, still didn't work. I called Samsung, they said use "0000" or call Motorola, so I called Motorola & was told the same thing.....use "0000"

Can you help me?????

Thanking you in advance,
Bob

Posted by on

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Most probably the hands free device is not in pairing mode. The way to put it in pairing mode is as follows:
- press the off button till the device is off
- hold the ON/OFF button for 6 seconds
- THE device shouLD be in pairing mode now and the red/blue lights will flash alternatingly.
- Now you can use your phone to serarch and enter "0000" .
- Then turn it off.
- Turn it on by holding the ON/OFF button for 3 seconds. Teh blue light will flash only (no red light flashing).




Posted on Feb 12, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

It finally paired for me after i held the talk switch on the hkt450, for about 20+ seconds. he password i used was 0000. once i saw the red and the blue lights alternating the pairing worked instantly, till then i was having the same problem as you mentioned.

Posted on Sep 14, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Here's the answer> I tried and tried on different phones but nothing worked until I held down the MFB longer than the recommended 6 secs. You have to hold it down until you hear a beep from the speaker, then enter the passcode. Soon as I did this it worked flawlessly.

Posted on Feb 07, 2010

  • Texpert101 Dec 17, 2010

    Thanks, your solution worked for me. The MFB need to be held down a bit longer even after the usual pairing tone is heard - until a single beep is heard.

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had same problem trying to pair using the steps listed in manual and in these other responses...while device was plugged into charger.

i did the same steps using code 0000, with device UNPLUGGED from charger and it paired successfully.

Posted on Dec 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sm-g31or5 want to pair with my 07 toyota solara convertible. phone says paired, but not car


Just had to pair for a friend few days ago, Toyou press setupota will pair to audio, but not hands free talk. Not sure exactly what buttons to push on your particular, so I would suggest read your car manual for "Hands Free Bluetooth" Pairing, not just audio pairing. On Toyota that I paired, after you press setup Bluetooth you will have to press "Phone Off" button on your steering wheel to get into hands free pairing, but check your manual to be sure.

Apr 09, 2015 | Samsung Cell Phones

1 Answer

I do not have the manual and do not know how to connect my iphone 4 to a Wansun Bluetooth hands free speakerphone visor kit.


Standard Bluetooth speakers you just hold the power button on til the blue light flashes.

Once that's accomplished, it's in pairing mode.

Go into the setting in your iphone and turn on bluetooth. It should then find all items waiting to be paired.

Click on the speaker, if it prompts you for a code it's standard four zero's 0000 and it should connect and work.

Apr 15, 2014 | Apple iPhone 4 Black Smartphone

1 Answer

How do I sync this visor hands free to my phone. I lost the instructions. Vosor blue tooth is a Motorola TZ700 and my phone is Samsung Haven.


Turn off the hands free.
Press the call or power button for about 10 seconds until it beeps or flashes.
Go into settings on the samsung, turn on bluetooth and pair it up!

Good luck!

Jun 08, 2011 | Cell Phones

1 Answer

Hi i have a hands free bluetooth for my car, and a samsung propel cell phone.i got them to pair once and was happy for a few days.i pushed the button on the hands free in my car and it no longer wants to...


it might help to delete the connection and pair the phone and the bluetooth device. Have you checked on the phone under the bluetooth meny if the bluetooth device is approved?

Sep 28, 2010 | Cell Phones

3 Answers

How do I use the loud speaker on a Blackberry pearl?


Hi there

Although the Blackberry pearl does not come with a speakerphone, you can still set up this function by using a Bluetooth device.

HERE IS WHAT YOU SHOULD DO

Power on your Blackberry using the On/Off button in the lower right-hand corner of the device

Turn on Bluetooth

Find the Bluetooth option. In the main menu, select "device options."

Enable Bluetooth radio. Click on the trackwheel to scroll down until you see the option "Enable Bluetooth". Select this function (click the trackwheel) to turn on Bluetooth compatibility. If you have completed this step correctly, you will now see a "Bluetooth icon" on your Blackberry screen. If you want, you can later turn off Bluetooth by repeating Steps 1 to 3 and then selecting "disable Bluetooth".

Pair your Blackberry with a Bluetooth speakerphone

Power on your Bluetooth speakerphone device using its On/Off switch or button.

Find the Bluetooth option in the main menu by again selecting "device options" and then using the trackwheel to scroll down until you see Bluetooth. Select this by clicking the trackwheel.

Add your Bluetooth device. Click on the trackwheel to scroll down until you see "Add Device." Then click on the trackwheel to select this function.

Enter the name and passkey of your Bluetooth device. When prompted, scroll down with the track wheel until you see the name of your Bluetooth device. Your Blackberry automatically detect your Bluetooth speakerphone if it is within 10 meters. If it does not, enter the name of the device, then type in the passkey provided by the manufacturer of the speakerphone.

Enter the passkey on your Bluetooth speakerphone. Your Blackberry and Bluetooth speakerphone can now communicate with one another.


To use the speaker during a call all you need to do is;

Dial a number and hit the send key. Make sure that your Bluetooth speakerphone is on, and that you have already set your Blackberry to "Enable Bluetooth." If you see the "Bluetooth icon" you have already done this step.

Activate your Bluetooth device. When the call has connected, click on the trackwheel until you see the option "Bluetooth Device". Then click on the trackwheel to activate the Bluetooth function. Your Blackberry will now route your call to the Bluetooth Speakerphone.

Turn on the speakerphone. Depending on which Bluetooth Speakerphone you have purchased, you may need to click on the "speakerphone" button to enable this function. Once the speakerphone is on, you may continue with your phone call.

Sep 19, 2010 | Cell Phones

1 Answer

I am trying to pair my iphone 3g with a samsung impression. The samsung pairs with the iphone but the iphone can't find the impression.


you cannot send or receive data on the iphone via the bluetooth, the bluetooth is only to use with devices like hands free

sorry

nick

Jul 02, 2010 | Apple iPhone 3G

1 Answer

Hands free connection


I suggest UPGRADING your BlueTooth device.
My V9 works great with the MOTOROKR T505 BT car kit.

Apr 04, 2008 | Motorola Mobility MOTORAZR2 V9 Cellular...

Not finding what you are looking for?
Cell Phones Logo

Related Topics:

788 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cell Phones Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

yadayada
yadayada

Level 3 Expert

66126 Answers

William Alequin

Level 3 Expert

856 Answers

Are you a Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...