I have a athon 3000+ 64bit I just installed with and a new video card installed.... the rest of the computer and programs the same...
My question is I have a wordpress blog and placing admin/pass it directs me to the blog instead of the controls...
I'm sure I have the same firewall and programs and I even disabled the firewall as a test...
Would my new board or video card do this? I formated xp 32bit just to try with same affect.
I found a way to enter control option on my blog... I was just curios to why this is happening. I saved the link that would block and tryed on another computer with same firewall and I could enter.
If you are trying to login from the frontend/homepage of your blog, it will certainly redirect you to the homepage after authentication. To enter into your administration area (control option) directly, open /wp-admin/ . For instance, if your blog is at domain.com, you would type domain.com/wp-admin/ Also, your graphic card change has got nothing to do with your WordPress login.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
When you already purchased a new PCIE card for it what you need to do is to just plug the video card to the mother and then power it on and computer will automatically disable the onboard video card and then once computer is up run the setup disc for the new video card and install all the software for it and you;re ready to go now.
When the Computer is off install the AGP card and put it together next start the computer when it starts up hit Del key before it boots up go into bios go to devices and disable onboard video, then hit F10 say yes to save changes and reboot it will then detect the card and will ask for drivers for the card. Be sure you read the directions for the video card You may have to install the drivers first, since you did not mention the card brand names and what mother board you have. Asus has many mother boards.
The sound quality built in to most mother boards is not the best quality. It is a compromise. The best solution is to install a high quality sound card in an available slot.
For video quality, it is the same issue when it comes to high quality video.
Before installing the new sound card, uninstall the existing sound drivers and sound software for the built in sound as necessary. You may have to go in to the BIOS set-up and dissable the mother board's built in sound. It is best to consult the instructions for *********** board to know the details for the particular mother board. You should contact the dealer for your computer to have proper details.
Turn off the computer, and disconnect the AC cord. Open the case, and install the new sound card according to the instructions that come with it.
When the computer re-starts, it should tell you that it found new hardware. Go through the installation procedure. There will be drivers and some software and drivers that must be installed.
If you are not used to this type of procedure, it would be best for you to take the computer to a computer service place and have them do the installation for you.
Can you press the F1 key or DELETE key and bring up the Setup menu? Can you see it?
If you can't see the above, it sounds like someone was not grounded to the computer case when they installed the new motherboard. Static electricy is the #1 killer to all electronics. If this is the case, you will have to buy an aftermarket video card and install it to see anything.
The VGA monitor will work with any video cards on the market.
If the motherboard said that it uses an AGP video card. That is the only one it will use. Make sure the card matches the motherboard or it will not work. All video cards are marked on the outside top of the box and your motherboard is maked by the AGP slot. Make sure you get the right speed format also. 8X will only work with a 8X.
I hope this helps and I will check back later to see how you made out.
my goodness.. you have spent a lot in your computer i think.. i dont think changing mother board and installing a new vedio card will solve this problem. as u have said that u have installed a new card make sure that you are giving the connections of your monitor to the gforce card and not to the mother board again.
if connection for monitor is going for gforce properly your RAM is the problem. as per your configuration its single 512mb ram. i would advice you to go and get another DDR RAM(same 512 prefrably) from any of your friend and put it in you mother board in by removing the normal RAM you had. this will work for sure i think. if this is not working dont rate me in-approtiate. i just triend my best. sorry and tahnks.. good luck
wat do u mean by dis--->"board starts up cant get any video from any cards"
well r u trying to say is that u cant watch movies or play games?
well is ur computers boot-up? lyk is windows running?
another question ur board might be not compatible to such kind of cards have u check ur mother board manual?
can u name ur motherboard breifly? like full model number?
n as u said u think ur mother board doesnt work , so if ur motherboard is not working is ur motherboard capable enough too install a windows without any errors? if yes then ur motherboard is 100% working its just that the video card that u'ave bought was not compatible enoguh to fit ur motherboard
u answer my these question then i'll tell u which video card too buy + mention ur budget that how mucch expensive card u can afford!