Really...i know you're laughing. Just replaced the batts. Tried 4 different brand new ones...even put them in backwards on purpose..still not working either in the right way or the wrong way. REALLY Is there a code to program it? It is the original remote. Thanks for your help.
The led senser may not be picking up the signal,you can use the camera in your phone to see if the remote is working,if there is no light flashing in the camera when you press the buttons the remote is not working,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
"After replacing the 9-volt battery, the scale wouldn't turn on. I tried new Duracell and a Kroger brand batteries. I eventually discovered that the stock battery (Tianqiu brand) was shaped slightly differently from the new batteries. The minus contacts were not quite touching. Luckily, I just had to bend out the connector on the scale so that it touched the battery. Now it works again."
I wouldn't lose any sleep trying to fix it. They sold you a new product so they owe you one that works. The problem may be the remote control or the TV itself, and there's not really anything simple to do to fix the problem if you already tried the batteries. Just take the whole works back in and get a new set. Cheers.
I have the same plasma Pioneer tv. I also tried a replacement remote and no fix. I replaced the infrared receiver module (~$4 from Radio Shack) on the TV, yes it involved taking the tv apart. Voila, now I have two working remotes.
Your battery could say its good by just testing voltage,but when a load is put on it , its a different story. My dewaltbatt. did the same thing I opened up the batt. case and there was 12 "C" sized batteries inside linked together with little metal strips. I bought 12 rechargeable "C" batts. and carefully drilled where the metal strips are soldered, changed out batt. and re solder. It's been over a year now and still drilling . Also you should do this one batt. at a time so you don't put one in the wrong order .
Remote control problem: your going to laugh at this but this was an easy fix, after my husband told me that there was something wrong with it, I tried to use the remote and he was right, it wasn't working. I changed the batteries that evening and sure enough it still wasn't working. The next day I had a closer look and thought that it wasn't right that a new t.v. remote wouldn't work, and lo and behold the problem? My housekeeper put a picture right in front of the electric eye of the t.v.! Guess what, it works quite fine again, thank-you for your time, and I am glad that it wasn't anything major. Peggy
So found the problem it was the seilnoid on the wasnt working properly store said good put it back hit with small hammer fired up so just replaced whole strarter now fires first time sounds awesome had lot of trouble tracking it down went threw new battery's thinking that was prOblem but was bad starter unit try this maybe will help u to