Question about PC Desktops

2 Answers

The issue is: Unable to Send/Receive emails from winThe host 'POP3' could not be found. Please verify that you have entered the server name correctly. Account: 'POP3', Server: 'POP3', Protocol: POP3, Port: 110, Secure(SSL): No, Socket Error: 11001, Error Number: 0x800CCC0Ddows Mail Error -0X800CCC0D. The host 'SMTP' could not be found. Please verify that you have entered the server name correctly. Subject 'hello', Account: 'POP3', Server: 'SMTP', Protocol: SMTP, Port: 25, Secure(SSL): No, Socket Error: 11001, Error Number: 0x800CCC0D

Posted by on

  • 1 more comment 
  • Kathleen Young Jan 15, 2009

    thank you, thank you---i'm very appreciative.

  • Anonymous Mar 13, 2014

    unablUnable to logon to the server using Secure Password Authentication. Account: 'pop.hmc1.comcast.net', Server: 'pop.hmc1.comcast.net', Protocol: POP3, Server Response: '-ERR Mate, the command must be one of CAPA, USER, PASS or QUIT', Port: 110, Secure(SSL): No, Server Error: 0x800CCC90, Error Number: 0x800CCC18e to logon

  • Anonymous Mar 25, 2014

    protocol

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 42 Answers

Either you have the server name incorrectly setup in Outlook Express, or your internet connection is down currently. Check with your ISP to fix this problem.

Posted on Jan 15, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 741 Answers

You are receiving this error because of one of two reasons:
1) Your email account is not set up properly. Click on Microsoft Outlook, click on Tools, then Accounts. You will see a window with columns stating Account-Type-Connection. If an account is set up then click on it then click on Properties. Click server tab and you will see the SMTP server block and the POP3 server block. Both of these fields will read as follows: pop.XXXXX.net and smtp.XXXXX.net. Your Internet Service Providers name will be in the XXXX. If these are not set up properly then you cannot connect to send email. If they are filled out correctly then you need to call your Internet Service Provider and inform them of your situation. Their server is not working properly.

Don't forget to 4 star this solution.

Posted on Jan 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Unable to send selected list of digital photographs


Please verify that you have entered the server name correctly

Feb 24, 2014 | PC Desktops

4 Answers

0send/receive showing 0 of 52 task completed?


hi!!!!!

may be there is a problem in your ISP
so try to resend it
or try to zip your jpegs file and then sen it to email!!!

Sep 21, 2008 | PC Desktops

3 Answers

Unable to use Outlook Express as my main default email..all my emails addressed to geoffrey@scholes1129.fsnet.co.uk are now accessed via Orange web mail.whereas previously all my emails came by Outlook...


help and technical support how to set up Outlook 2003 to access Orange email Article ID: kb3529 Which version of Outlook am I using?
There are a number of versions of Microsoft Outlook available. These instructions provide a step by step guide to setting up Outlook 2003, however if you use a different version, the instructions can be adapted using the settings section.
If you're unsure which version of Outlook you are using, click on Help and select About Microsoft Office Outlook.
open the Outlook 2003 options panel
From Outlook 2003, click on the Tools menu and select Options.

Tip: If you are unable to see Options click on the double arrow at the bottom to expand the list.
set up an email account
  • from the Options panel, select the Mail Setup tab
  • in the 'email account field' click on Email Accounts
choose the option Add a new email account and click on Next
outlook03addnew.gif
Choose the option POP3 and click on Next


from the 'Email Settings' field, enter the information below:
Once entered, click on More Settings

Internet email receive a message with the subject 'Microsoft Office Outlook Test Message' from yourself, demonstrating that you are now able to send and receive emails using Outlook 2003.
For more info check the link below
http://help.orange.co.uk/resultDisplay.do?gotoLink=221&docType=1006&contextId=843:221.247,168.217&docPropValue=kb3529&clusterName=DefaultCluster&contentId=5f4e52e7-ddc0-41b2-9417-c71b96daea1f&responseId=7fc004a3f2245237:100ebec:11981924106:6059&groupId=1&answerGroup=1&score=937&page=http://ESERVER_d850d292-3b68-4bd3-ab4f-99fc164b3c25.xhtml&result=0&excerpt=Microsoft+Outlook,+Outlook&resultType=5002#Goto221


I hope this helps
Please rate accordingly
Thank you
Computerrep

Apr 24, 2008 | PC Desktops

1 Answer

What does this mean (The host 'smtp' could not be found. Please verify that you have entered the server name correctly. Subject 'happy thanksgiving', Account: 'pop2', Server:...


When you want to send mail, your mail agent (e.g. Outlook or Opera Mail or Firebird) tries to authenticate with an SMTP (simple mail transfer protocol) server so it can send the mail.

You need to fill in the actual server name, account, port, and password for your ISP's smtp server so you can send mail. You receive mail via a different protocol, commonly pop3.

Aug 15, 2011 | PC Desktops

1 Answer

I have an e-mail address but cannot send or receive an e-mail


Call your ISP and get your POP3 server name, and also get the SMTP server name.
Enter them in Outook.
Tools accounts, server, POP3 and SMPT
Enter your userid and paswrd.

Sep 05, 2009 | Lenovo 3000 N100 0768 - Pentium Dual Core...

1 Answer

I have not been able to "send" ANY MESSAGES since last night. I can receive messages but not SEND. It is almost 4:00 and I still cannot find ANY HELP FROM YAHOO. the message that pops up when it is...


  1. From the Tools menu, choose "Accounts."
  2. Select the "Mail" tab.
  3. Click the "Add" button.
  4. From the Add menu, click "Mail."
  5. In the text box labeled Display Name, type your name and click "Next."
  6. In the Email Address box, type your Yahoo! Mail address (be sure to include "@yahoo.com") and click "Next."
  7. Under "My incoming mail server is a…" select "POP3."
  8. Type "plus.pop.mail.yahoo.com" in the Incoming Mail (POP3, IMAP, or HTTP) Server box.
  9. Type "plus.smtp.mail.yahoo.com" in the Outgoing Mail (SMTP) Server box.
  10. Click "Next."
  11. In the Account Name box, type your Yahoo! Mail ID (your email address without the "@yahoo.com").
  12. In the Password box, type your Yahoo! Mail password.
  13. If you want Outlook Express to remember your password, check the "Remember password" box.
  14. Do not check the boxes labeled "Log on using Secure…"
  15. Click "Next."
  16. Click "Finish."
  17. Select 'plus.pop.mail.yahoo.com' under 'Account,' and click 'Properties.'
  18. Click the “Servers” tab.
  19. Under “Outgoing Mail Server” check the box next to “My server requires authentication”
  20. Click the 'Advanced' tab.
  21. Under “Outgoing mail Server (SMTP)”, check the box next to “This server requires a secure connection (SSL). Enter port number “465” in the “Outgoing mail (SMTP)” field.
  22. Under “Incoming mail (POP3)”, check the box next to “This server requires a secure connection (SSL)". The port number in the “Incoming mail (POP3)" field should automatically change from 110 to 995. If it doesn’t, make sure the port number is set to 995.

Mar 13, 2009 | PC Desktops

1 Answer

I am attempting to transfere E mail facility to windows mail. They cannot verify the host/ server as tools.sky.com please verify the correct address for incoming and outgoing.


Applogies for the copy and paste, but it's rather long winded to type, but sky tools is not the email setting, see below:-

1.Open Outlook Express, click Tools then select Accounts 2. Click the Mail tab, then click Add and select Mail 3. The wizard will start. Type in your name then click Next 4. Enter your email address then click Next 5. Leave the My Incoming Mail Server is a POP3 Server drop down box as POP3. In Incoming Mail Server enter: pop.sky.com (all lowercase, no spaces). In Outgoing Mail (SMTP) Server enter: smtp.sky.com (all lowercase, no spaces). 6. In the Account Name Box enter the first part of your @sky.com email address (everything before the @ sign). In the Password Box, enter the password for your @sky.com email account, then click Next. 7. Click Finish 8. To complete the acount creation process click Tools then select Accounts 9. Click the Mail tab, then click Properties 10. Click the My server requires authentication box to place a tick inside. Click OK 11. Repeat the above process for each mail account you want to set up, including sub accounts. Each sub account will have a different email address and password. If you're having trouble sending email from Outlook Express (or other email software), it may mean you need to switch on SMTP authentication.

Sep 09, 2008 | PC Desktops

2 Answers

I am unable to connect to my server, POP3,so not receiving incomming mail or able to send messages. A security alert screen pops up asking for my user name and password and when I type them in, the screen...


Try contacting your ISP/E-mail provider, in case they're having issues their end.

Even if they're not, they should be able to give you more help than we can.

Aug 29, 2008 | PC Desktops

1 Answer

When I attempt to email a document, the following is the message I receive: Some errors occurred while processing the requested tasks. Review the list of errors below for more detais. The host could not be...


Looks like you do not have the SMTP server settings correct. Have you tossed mail from this account before? Who is your ISP? What email program are you using? (Outlook, Outlook Express, Thunderbird.... list goes on)

Jul 10, 2008 | PC Desktops

1 Answer

Cannot send emails out. Sometimes do not receive emails. Sometimes they go to my husband's mail address?? Get this rather long message saying: The host 'smto.blueyonder.co.uk' could not be found. Please...


hi Dtaillandier,
Please follow this link in which there are details of why you are not able to send/receive emails or why you are receiving errors.
http://support.microsoft.com/kb/813514 this is for outlook/outlook express.

The socket 11004 error also means Valid name, no data record of requested type. The requested name is valid and was found in the database, but it does not have the correct associated data being resolved for.
hence try these steps,I would request you to reconfigure your Account settings for the email server.This should resolve your issue.
please revert for any questions : sanju_kumarbs@yahoo.co.in
Good Luck.

Jun 17, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...