The CAN H and CAN L wires go where from my dvd player in my van.
I need to know where these wires run to . Better yet where do I hook them to in my van from my deck? help? do they go to speakers ,a lug nut, my antenea,or just dangle in the back of the deck waiting for the wiring faries to hook them up?
Re: the CAN H and CAN L wires go where from my dvd player...
Well the wiring faries still havent come to help me out with my plow on my truck so i dont think there gona come. but what kida van is it there are alot of diff setups. email me at firstname.lastname@example.org
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Most likely its the ignition wire.. That 12 volt line let's it know when the switch is turned.. If the radio is cutting on it may simply be interfering either that or its too much with the control wire this is why its better to get the one in the dash and run the video moniter off the aux video out instead of trying to run 2 separate units
from my experience your 2011 sienna van has to have come from toyota pre-wierd for you ez connect dvd play ... and you must also have the ez connect video monitor with wireless head phones if your model sienna van is not pre wired then you need to take back the dvd player and buy a tft lcd monitor and dvd player all in one with wireless fm modulator and wireless head phones... and have it installed by a mecp certified installer at a quality shop... i could sale u one but not in your area. they go for depending on size of screen and mounting room 299.00 to 600.00 then add install price depends on quality and size of screen
email me at email@example.com mecps certified advance for the last 21 years...
I would just hook up the dvd/vhs player with the red,white,yellow rca cables that should of come with your unit and just go to the input on the tv to watch your dvd/vhs player. This will give you a better picture and sound while allowing you not to have to watch dvd/vhs on a channel which helps make the dvd/vhs player independent. Also if possible I would hook the converter box up with the red,white, yellow rca cables to the tv as well if your tv has more than one set of red,white,yellow plugs since it is a better connection that coax and you probably watch more tv than vhs/dvd anyway. So bottom line try to hook up both boxes red,white,yellow and watch each box on different inputs instead of like channel 3 or 4. Also to record of converter box you can run coax from converter box to dvd/vhs combo and make sure your dvd/vhs player is on tuner input or channel 3.
Hi, Please hook your dvd player and tv as follows... Find Yellow color pin as Video Out, Red and White pins for Audio Out (right and left channels) and same goes to rear input-1 or input-2 what ever is available in your TV. watch out color of pins, same color in both units should be hooked up. Now play dvd player and select input in tv and enjoy. Still needs help, please mention model and brand of DVD Player and TV to guide you in better way.