Question about Garmin Rino 120 2-Way Radio

1 Answer

Waypoint selection uses last location instead of current location

Bought rino 120 this fall. Worked very well for about two months. Then waypoints started acting oddly. In setting a waypoint, it now enters the data from the last location it was active. Must create addnl point to get the current location. Example; went xc skiing, set waypoint at start of trail, instead of 3,000' elev it showed 450' (my home). Had to enter addnl waypoint to get the correct elevation. Grateful for any insight. Thanks in advance.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 258 Answers

Backup all data and reset the unit. Hope this helps...

Posted on Apr 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I save a new waypoint on my garmin 76cx?


Hi!

From your User's Manual Page 7:

You can create waypoints using three methods. Press the Enter/Mark key while at a location, create a waypoint on the Map page or you can manually enter lat/lon coordinates.

TO MARK YOUR CURRENT LOCATION
Press and hold the ENTER/MARK key until the Mark Waypoint page appears. A default three-digit name and symbol will be assigned to the new waypoint. To accept the waypoint with the default information, simply select OK.
To change any information, select the appropriate field and press ENTER to open the on-screen keypad. After entering and confirming the information you wish to use for the waypoint, select OK.

CREATING WAYPOINTS USING THE MAP
On the MAP page, use the ROCKER to move the pointer to the map item you wish to mark.
Press and QUICKLY release ENTER/MARK to capture the pointer location and open the information page for the map item.
Select SAVE. If there is no information for this point, a prompt will appear saying "No map information at this point. Do you want to create a user waypoint here?". Select YES.

If you require a User's Manual, you can view/download it from:
http://www8.garmin.com/manuals/GPSMAP76Cx_OwnersManual.pdf

Hope this is helpful to you.
Good Luck!

Feb 27, 2011 | GPS

4 Answers

Memory full, cant delete stored favourite destinations, sat nav turns off when delete is pressed.


Hello vinny!!

Perform a hard reset to clear all your memory!!!


Step 1. Turn your Nuvi unit off, remove any SD cards from the SD card slot and make sure that the unit is not plugged into any computer.
Step 2. Place a fingertip on the upper left hand corner of the touch screen and keep it there while turning the unit on, a prompt should read " Do you really want to start in maintenance mode?"
Step 3. Select the yes button.
Step 4. Enter your PIN if enabled.
Step 5. Main Maintenance Mode screen should have 4 selections:
System information
View Diagnostics
Clear User data
Clear Waypoints
Step 6. Choose "Clear Waypoints". After some time the unit should reboot.

Jul 12, 2008 | Garmin GPS

1 Answer

How do you set waypoints on the Magellan Meridian gold. To and from a location?


Press and hold the GOTO button for 2 seconds. A "Mark" screen will appear. If you are saving your current location, highlight the "Save" at bottom of screen and press enter. This will save you current location. You can edit the name of the waypoint at this screen also. You can do this before you save the waypoint or you can go to Menu/Database/User/Waypoint (the one you want to edit)/Enter. At this screen you can edit the name by pressing the arrow up or down to get to the name field and press "enter" to get to the alphabet screen. If you are entering a waypoint using coordinates, do the above but edit the coordinates to the ones you want to use and then save.

Sep 30, 2009 | Magellan Meridian Gold GPS Receiver

1 Answer

How do i erase tracks on 525S


To edit an existing waypoint:Or MOB
1. From the Home screen, select Information > User Data > Waypoints.
2. Select the waypoint you want to edit.
3. Select Edit Waypoint.
4. Select the waypoint attribute you want to change (Name, Symbol, Depth, Water Temp,
Comment, or Position).
To delete a waypoint or an MOB:
1. From the Navigation chart, use the map pointer ( ) to highlight the waypoint or the MOB
on the Navigation chart.
OR
From the Home screen, select Information > User Data > Waypoints.
2. Select the waypoint or the MOB you want to delete.
3. Select Review > Delete (The Review button is only shown when more than one waypoint
is in the vicinity.)

Sep 24, 2009 | Garmin Gpsmap 525s Dual Frequency Combo...

1 Answer

Jaguar Xtype navi routing not working


I had the same problem. What you need to do is clear the waypoint locations from the system. To do this hit the "nav" button, get to destination menu and locate the waypoint icon and touch. Delete all waypoint locations shows up at the bottom. Touch button, which will delete all waypoint locations and it will work again. Just to be safe, I cleared all of my stored locations including previous destinations

Jun 25, 2009 | 2003 Jaguar S-Type

1 Answer

Cannot save waypoint on my magellan triton 200 gps.


Assuming you have installed the latest firmware. When you are on the map screen, just click on the center button and do a create a Waypoint and pick current location.

Or push the MENU button .. choose CREATE a WAYPOINT and when you GPS is on and has locked in on the Satellites . then create the Waypoint.

Mar 09, 2009 | Magellan Triton 200 Handheld GPS Receiver

1 Answer

Reboot


Hold the navigation stick and page button down while powering up. A dialog will ask if you want to delete all data. push yes.

A backup of your waypoints, routes, and tracks it nice to have if you wish to save them.

Feb 07, 2009 | Garmin Rino 120 2-Way Radio

1 Answer

GPS Coordinates


Looks like if you go to mark a waypoint for your current location you can then edit the long and lat to whatever you want it to be...

Mar 02, 2008 | Garmin Rino 530 GPS Receiver

3 Answers

Entering waypoints for an Eagle Explorer


Get the instruction book, it can be downloaded from the Eagle/Lowrance for free.

Feb 16, 2008 | Eagle FishElite 320 GPS Receiver

3 Answers

Touch screen does not work.


(1) Disconnect any external GPS antenna. (2) Do not turn on auto engine. (3) Turn off any other peripheral devices. (4) Simultaneusly hold down the PAGE and MENU buttons while turning on the 2620. A prompt box will appear asking if you really want to delete all user data. Touch the NO selection. Then turn off the 2620. (5) Simultaneously hold down MENU & ROUTE buttons while turning on the 2620. (6) A self-running diagnostic program will appear. Allow it to run for a couple of minutes; check to see that all parameters indicate "PASS" or other indication of being OK. If any parameter is not OK, make a note of it for potential communication to Garmin, then proceed with the following steps (7) Turn off the 2620. (8) Simultaneously hold down the PAGE, MENU & ROUTE buttons while turning on the 2620. A SCREEN CALIBRATION adjustment screen will apear. Quickly touch the points indicated as the calibration program runs. At the end of this procedure, the screen will display a window indicating that the calibration either "PASSED" or "FAILED." If it "PASSED," continue to steps (8)-(9). If it "FAILED," turn off the 2620 and repeat this step. If, after three calibrations attempts, each one is "FAILED," then also turn off the 2620 and proceed to steps (8)-(9). (8) Turn on the 2620. Press the "OK" button each time prompted to do so. Wait for maps to load and for the 2620 to initialize, acquire satellites, and display your position. (9) Press FIND button, then touch the right-hand vertical screen position adjustment to scroll screen display down to reveal WAYPOINT selection box. If unable to select WAYPOINT, or if attempting to do so only selects an adjacent box, then repeat step (7), and return to this step. (10) When various waypoint selections appear, attempt to scroll down to a selection not visible when the list of waypoints first appears, and select one of them. If still unable to select WAYPOINT box, unable to scroll screen down (or if trying to do so selects a stored waypoint instead), once again repeat step (7). If successful,then proceed to step (11). Also proceed to step (11) if you have repeat step (7) but then still can't select WAYPOINT, can't scroll down after selecting WAYPOINT, or can't select a particular stored WAYPOINT. (11) Press the upper-right hand "X" to close out the FIND screen or sub-screen within that function. If unable to close the screen, press the PAGE button. (12) Press FIND button, and when selection screen appears, touch ADDRESS. On next screen, touch the STATE line and touch the ENTER A CITY in (name of state). When keyboard appears on screen, use it to enter your city, then touch OK. Continue this procedure to enter your house number and street name, then press "OK." If all screen keyboard keys not responding, repeat step (7), turn the 2620 off and on again, wait for it to initialize, and then attempt this step again. (13) Repeat this procedure several times if not initially successful. By the second or third run-through, the touch screen should respond fully and accurately. If, after many runs through this procedure, the touch screen still will not respond, the screen sensor probably will need to be replaced ($255). The foregoing procedure brought my touch screen back to life last evening, much to my delight. Do not be too concerned if the SCREEN CALIBRATION step does nto produce a "PASS;" on my third calibration attempt it produced a PASS but all of the touch screen points still had not returned to functionality. I was unable to get a PASS during the screen calibration step after that, but the many repetitions apparently nonetheless made the difference, as by patiently following the above prcoess for five cycles, full screen functionality was restored.

Jun 18, 2007 | Garmin StreetPilot 2620 GPS Receiver

Not finding what you are looking for?
Garmin Rino 120 2-Way Radio Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garmin Radio Communications Experts

TO Lady

Level 3 Expert

638 Answers

eradiostore
eradiostore

Level 3 Expert

1641 Answers

Steve

Level 3 Expert

3287 Answers

Are you a Garmin Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...