- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Brother HL - 2140 Drivers Visit the above link from Brother Official Support. Select the Operating System and download the drivers. After in stalling the drivers, go to the Control Pannel - Printers, and set HL-2140 as default printer.
Hope it helps! Good Luck! Don't forget to convey your feedback CreativeTECH
The cartridge reset gear most likely miss the switch in the printer and it didn't reset the printer, common enough. Look at the cartridge gear side in front of you, there is a big 'window on the right, is there a white or black "tab" in the window? (if not it can't reset the printer). Is the tab on the left side of the window (down)? If it is on the left you can open the cover and very carefully reset the tab to the right the up position.
Set your new HL-2140 as the default printer. Go to Control Panel, Click Printers and Scanners tab, and set your Brother HL-2140 as your default printer. You may have other printer as the default printer currently. Check your connections again. Connect it to another USB port as the current port might not be responding due to connection contact problem.
You need to open the front cover of the machine and remove the
cartridge (drum and toner) On the top right there is a tab that you
need to slide from left to right about 20 times, then bring back to