Advik wireless mouse spporting drive file.

namastey!

*clean the bottom of a mouse and if the lens gets dirty wipe it with the soft dampened cloth
* replace the batteries
*Reinstall wireless drivers. If your mouse came with a CD, re-insert it into your computer's disc drive and install all software and drivers.Disable internal transceiver. If your wireless mouse connects to an internal Bluetooth transceiver, disable it using the Bluetooth utility in the Control Panel, and then re-enable it after a few minutes. Then try connecting your wireless mouse.

Try pressing Connect on the receiver, then when the light is flashing, press Connect on the mouse. The light should stop flashing and the mouse should be usable. If it's not, check that you have the Dynex mouse driver installed.

Believe you will need a install file to install the appropriate drivers and software to run the wireless hardware.
Goto google.com and search Dell Wireless Keyboard Install Files
and browse you should find what you need to install and get it running.

mcdevito75 here, The optical mouse should have instructions, or you can type in search from home page up-date drivers.

Hi, connecting the Dynex Wireless Optical Mouse is easy. First, you need to install the driver for the mouse. It should have come packaged with the mouse, on the CD-ROM. If you don't have the CD-ROM you can download the driver from the website and install it:

http://www.dynexproducts.com/productSearch.html?query=wireless+optical+mouse&mainSearchButton=

Scroll down to "Dynex Wireless Optical Mouse" and click "English" next to "Driver:" to download it, then unzip it and install it.

Once you've installed the driver, all you have to do is put the two AA batteries in the mouse, flip the switch on the bottom to On, and insert the USB receiver into your computer. Your mouse should be usable right away!

What you need to do is install the drivers from the DVD that came with your Mouse.

Re install the drivers

why use a floppy disk when u can use a flash drive and boot off it ?

Most devices last a long time. Have you tried re-installing the software for the keyboard & Mouse> Also go to microsoft download center and get the latest drivers for you setup. Make sure when you do, choose the right Operating System driver for your Keyboard & Mouse. Hope this helps. Bud

You need to download the IntelliPoint driver from the Microsoft Corporation website. After you install this driver, you will be able to use your mouse as normal.