Question about Nvidia GeForce 6200 AGP Graphic Card

1 Answer

Error code 43

I just bought an Acer computer with Vista. It has 2 graphics cards, onboard ATI 1250 and a nVidea 7300 SE right out of the box. I play war games, COD, CODII, MOHAA, MOHHAB, and afew others. I plugged my monitor into the 7300 SE card and it worked fine for a couple of days then went ape shit. I had to plug back into the motherboard graphics card to view. In the device manager it shows both display cards. On the properties of the 7300SE card it says that windows has stopped this device due to problem. I have tried uninstalling and reinstalling the driver for the 7300 SE but when I plug into it, I still get nothing, black screen. I have the same problem i have Windows Vista and a Nvidia G-force 6200 512 mb video card and i put the driver cd and all of that it finishes the installation but when i restart the computer y go to device manager and it doesnt have the drivers can someone tell me a solution please

Posted by on

  • 1 more comment 
  • Anonymous Feb 15, 2009

    Get

  • Evelyn Johnson
    Evelyn Johnson Feb 15, 2009

    I switched out Ge Force 6200 128mb for a XFX GeForce 6200 512mb. Got software from Nivida web site. Installed fine but has yellow exclamation in Device Mgr. 3D will not play.

    Message: Windows encountered a problem installing the device software. Windows found found driver software for your device but encountered an error while attempting to install Nivida GeForce 6200. Windows has stopped this device because it has reported problems. (Code 43)



    Nivida reports the driver has been tested for Windows OS and it worked fine. The WDM driver in windows system works but limits the card. Any

    help is greatly appreciated.

  • Anonymous Mar 15, 2014

    windows stucks after installation of point of view 7300 graphic drivers

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 65 Answers

Uninstall both video cards, disable the integrated card in the bios, and then reinstall the stand alone video card. If you continue to have problems, please post what motherboard you use and what error code device manager gives.

Posted on Jan 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just got cod waw game but computer doesnt support vertex data am i wasting my time. I have acer L3600


Hello there,
COD WAW has a minimum system requirements of the following:
CPU: AMD 64 3200+/Intel Pentium 4 3.0GHz
RAM: 512MB (XP) / 1GB (VISTA)
HDD: 8 Gigabyte
GPU: 256MB Nvidia 6600GT/ATI Radeon 1600XT
One main reason why you cannot play the game, is that Intel GMA 3100 is not capable of rendering the vertex shaders that has to do with lighting.
  • In order to play the game, you need to buy at least greater than the PCIE video card mentioned. It's that simple.
  • For example buy an ATI HD 4670 512MB or Nvidia 9500GT 512MB consider the memory.
  • Click the link for PCIE Video card installation procedure. Installation


Hopefully you will enjoy COD WAW third person shooter game.
Hopefully this information helps.
Thank you for using FixYa.

Jul 29, 2011 | Acer Aspire T690 (AST690UP820A) PC...

1 Answer

When i try to start COD World at War i get this: ----- Initializing Renderer ---- execing ragdoll.cfg from disk ----- Client Initialization ----- ----- Client Initialization Complete ----- Trying SMP...


Hi, your laptop does not have a compatible graphics card enough to let you play COD 4, COd 4 requires a high end graphics card to play this game. Below are the minimum specifications needed to play this game. CPU: Intel(R) Pentium(R) 4 2.4 GHz or AMD(R) Athlon(TM) 64 2800+ processor or any 1.8Ghz Dual Core Processor or better supported RAM: 512MB RAM (768MB for Windows Vista) Harddrive: 8GB of free hard drive space Video card (generic): NVIDIA(R) Geforce(TM) 6600 or better or ATI(R) Radeon(R) 9800Pro or better Hope this helps!

Jun 15, 2009 | HP Computers & Internet

1 Answer

The game wont play graphics just sound


the x300 se is not a gaming card! Especially for new games such as cod waw. Get a Nvidia 9600gt to play that game reasonably!

Mar 24, 2009 | ATI RADEON X300 SE Graphic Card

2 Answers

8800GT restart pc when playing only cod4 on latest nvidea drivers


the game is probably not compatible
or you can download mozilla foxfire to run the game
don't forget to rate me

Feb 02, 2009 | XFX NVIDIA GeForce 8800 GT 512MB DDR3 PCI...

1 Answer

Error code 43


When going from the onboard Video  to the Video card, on all the most computer I have seen,, you need to go into the BIOS setup screen and turn off the onboard graphics to avoid a software conflect, which it appears that you are having..

Jan 21, 2009 | Computers & Internet

3 Answers

Upgrade video card on a gateway 5200 xl pc


You can get this card right now on e-bay for $53 including shipping. Not htr fastest but much,much better,I believe. 

New EVGA GeForce 8600 GT 256MB GDDR3 Video Card PCIE 16

Dec 23, 2008 | Gateway 5200XL PC Desktop

1 Answer

Trying to load call of duty 5 world at war . with g force 8800


It will say on the box it was packaged in what the minimum requirements are for the game....
Here is from a site i found....
Processor: AMD 64 3200+/Intel Pentium 4 3.0GHz or better
Memory: 8 GB free hard-drive space, 512MB RAM (XP)/1GB RAM (Vista)
Graphics: Shader 3.0 or better, 256MB Nvidia GeForce 6600GT/ATI Radeon 1600XT or better

http://www.nvidia.com/page/geforce_8800.html
link for your line of graphics cards.

You have not given the entire model # so it is unclear if your card is sufficient, however it does say GeForce 6600GT or better - which yours is

Dec 22, 2008 | Nvidia GeForce 8800 GT 512MB Graphic Card

1 Answer

ATI radeon xpress 1250 for laptop


Have you tried the windows update,usually for vista they have a built-in WDM drivers for ATI, and right now you may want to use that for the meantime if the computer did not recognize the exact model number also when using the windows update it you can check if microsoft has a new WDM driver for your video card.

The video card is a built-in video card on the mobo, right?

This this link
http://game.amd.com/us-en/drivers_catalyst.aspx?p=vista32/integrated-vista32

If you have a Vista Business 64 bit click the link below

http://game.amd.com/us-en/drivers_catalyst.aspx?p=vista64/integrated-vista64

Sep 19, 2008 | Computers & Internet

2 Answers

Error code 43


What you have to do, with your monitor still plugged into the onboard, is disable the onboard controller then restart.

Your screen will go to 640x480 during this process, but no worries.

Once you've logged back in to vista, open up your device manager again to make sure that your card is now enabled. If not, enable it. Also make sure that your cards' driver sortware is updated.

Switch your monitor over to the card now. No need to power down.

Open display properties, set your dual monitor setup to default on the single monitor that you do have plugged in and reset your screen resolution... and maybe even upgrade your monitor driver from generic to specific if you want.

The issue with nvidia cards isn't with vista or nvidia at all. It's a simple matter of driver conflict between the card and the onboard chip. You just have to tell vista that you'd like to make the card the priority adapter by disabling the onboard.

However, disabling the onboard DOES NOT make it unavalable to you. You can still utilize it in a dual monitor setup as a generic adapter without conflict.


Dec 26, 2007 | Computers & Internet

1 Answer

Installing Problems


It's a hardware incompatibility with windows vista. for example your graphics card on your Inspiron might not be fully supported in windows vista and your Laptop's graphics card is supported by Vista. Most of the times we can find this incompatibility is with graphics cards. Download and install the newest drivers for your inspiron's graphics card. I have seen your inspiron has an ATI Radeon X1300 graphics card. The windows Vista drivers can be downloaded here http://game.amd.com/us-en/drivers_catalyst.aspx?p=vista32/common-vista32

Oct 10, 2007 | Dell Dimension 5100 (D51L1) PC Desktop

Not finding what you are looking for?
Nvidia GeForce 6200 AGP Graphic Card Logo

2,284 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nvidia Computers & Internet Experts

Clive Gray

Level 3 Expert

1479 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Are you a Nvidia Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...