Question about Lexmark C762 Laser Printer

1 Answer

Printing fuzzy My Lexmark c762 is printing colors fuzzy

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,011 Answers

Sorry for the delay in getting back to you.

There are several things that can cause these problems.

Low grade toner. Have you noticed that fuzziness is always the same color or not?

A weak "Charge Roller" not charging the PC as it should.
A problem with the spinning mirror inside the laser unit.
The "Transfer Roller" not charging the paper properly.
To high a charge on the paper could cause artifacts on the PC to be pulled to the paper.

The fuser roller not getting properly cleaned and depositing residual image back on the paper.

Paper slipping in eiter the Tranfer Station or the Fuser.

I would suggest you place a service call on the unit and let a factory trained tech diagnose the failure for you.

Don

Posted on May 31, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace panel opreator lexmark c762


Please see the attach image for the instructions on how to remove and replace the operator panel of the Lexmark X762.11_7_2012_9_33_23_pm.jpg

Nov 07, 2012 | Lexmark C762 Laser Printer

1 Answer

How do we clean the rollers?


Please do refer to this link: http://bit.ly/OqwM6c to clean the transfer units. Should you require further assistance, please do not hesitate to contact us on LxkListens@Lexmark.com.

Jul 17, 2012 | Lexmark C762 Laser Printer

1 Answer

Lexmark X4650 InkJet Printer black prints fuzzy. Color is fine, but the black appears out of focus.


Try to check and make sure your black ink level is still good and not about to go empty. On the printer operator panel, press the Setup button > Maintenance > Ink Levels.
If the black ink level is still good, make sure the cartridges are aligned. Try this approach. On the printer operator panel, press the Setup button > Maintenance > Align Cartridges. Your printer will then print a page forcing ink through the cartridge nozzles and clean them as well as align the cartridges.
Try to print a document again to verify that the print quality has improved.

Oct 11, 2011 | Lexmark X4650 InkJet Printer

1 Answer

Lexmark C762 not printing any color but black


Here's an article in the Lexmark website on All Color Planes Missing Except Black. Just click on this link: http://bit.ly/9JRRD2. Follow the instructions carefully. If all else fails, I strongly suggest you contact Lexmark Technical Support to further investigate the problem.

Jul 01, 2010 | Lexmark C762 Laser Printer

1 Answer

How to fix 108 service printhead error on c762 lexmark printer


Hello, Please try this: Power off the printer, take the Color cartridge out(Magenta), take a thin and dust-free cloth or tissue and clean the hysinc mirror and the printerhead lens. The hysinc mirror and printerhead lens is in the printer not on the magenta cartridge. Reinstall the print cartridge and power on. Try again to print this will help.

Mar 19, 2010 | Lexmark C762 Laser Printer

1 Answer

Lexmark C772n - 127.07 Service fuser error


I searched the Technical Manual and there is no explanation of the code. The user manual simply says there is a printer failure. They ask that you turn the printer off, wait 10 secs and then restart. Then call 1-800-LEXMARK and they will tell you about the code.

Given that your printer is saying Service Fuser, it is highly likely the fuser is ready for replacement. The fuser is the component that heats to high temperature to fuse the toner to the paper and complete the print cycle.

Aug 12, 2009 | Lexmark C762 Laser Printer

3 Answers

83 itu maintanece


You replace the ITU it has reached its end of life cycle.

Jan 22, 2009 | Lexmark C762 Laser Printer

1 Answer

Recurrent paper jam


well, i hate to admit this, but we never solved it. for the C762N we had in our shop, we're assuming the frame is tweaked just a bit (the machine i was working on had some damaged lower plastics, probably from a small 1 foot drop or so).

best of luck.

chris

Apr 03, 2008 | Lexmark C762 Laser Printer

Not finding what you are looking for?
Lexmark C762 Laser Printer Logo

218 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...