Question about Compaq Presario C700T Notebook

1 Answer

Cant automatically detect IP

Networking Wi-five thru Lynksys one computer cannot detect IP and connect to internet. Need Help , I work at home.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 623 Answers

First, connect your computer via an ethernet cable to the router to eliminate any problems with your wi-fi setup.
Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;}

  1. Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} Power on the computer.
  2. Open the Control panel and the Network Connections applet.
  3. You should see something called "Local Area Connection".
  4. Double-click on it and click the Properties button.
  5. Double-click on "Internet Protocol (TCP/IP)" and make sure both radio buttons are set to "Obtain...automatically".
  6. Close all Windows by clicking "OK". (The second one takes a moment, because it applies the settings.)
  7. In the open window choose the Support tab and you should see your IP address, your Default Gateway (192.168.1.1) and your DHCP server (192.168.1.1)
For your wi-fi setup, repeat step 2 through 7. In step 3 you should see your "Wireless Network Connection". Use this one and repeat the remaining steps.

If this did not fix it for you, you have to come back and give more information on:

  1. Which router model are you using?
  2. What computer do you have?
  3. Which operating system (Windows, Linux, Mac)?

Let me know how this worked for you and I'm happy to assist further.

Posted on Jan 14, 2009

  •  C. Dante
    C. Dante Jan 18, 2009

    I just saw the post totally messed up.Sorry
    (Maybe I should ask at Fixya how that could have happened...;-)

    Here it is again:

    First, connect your computer via an ethernet cable to the router to eliminate any problems with your wi-fi setup.

    1. Power on the computer.
    2. Open the Control panel and the Network Connections applet.
    3. You should see something called "Local Area Connection".
    4. Double-click on it and click the Properties button.
    5. Double-click on "Internet Protocol (TCP/IP)" and make sure both radio buttons are set to "Obtain...automatically".
    6. Close all Windows by clicking "OK". (The second one takes a moment, because it applies the settings.)
    7. In the open window choose the Support tab and you should see your IP address, your Default Gateway (192.168.1.1) and your DHCP server (192.168.1.1)

    For your wi-fi setup, repeat step 2 through 7. In step 3 you should see your "Wireless Network Connection". Use this one and repeat the remaining steps.

    If this did not fix it for you, you have to come back and give more information on:

    1. Which router model are you using?
    2. What computer do you have?
    3. Which operating system (Windows, Linux, Mac)?


    Let me know how this worked for you and I'm happy to assist further.


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cant get my home computer and lap top to both go on line at the same time


A "hub" just "splits" the Internet connection.
Each computer connected to the hub gets an IP-address from your ISP (Internet Service Provider).
However, some ISPs only allow each customer to use _one_ IP-address.
Ask your ISP for the capability to obtain a second IP-address.

Mar 18, 2011 | Linksys (NH1005) 5x10/100 Mbps Networking...

1 Answer

Dsl wont pass thru router wired or wireless I have reset the router several times, the computer shows connected ,signal strenght excellent, but will not connect to the internet wired or wireless as long as...


You need to configure your router.
For that Connect your router to computer with ethernet cable then you can access it with following default link.
http://192.168.0.1
or
http://192.168.1.1
If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it.
Then it ask for user name and password.
Type user as "admin" and password as "admin" or "password" or blank.
Then you can see configuration page of router.
Click on WAN settings and set those settings as your internet service provider settings.
Enable DHCP if you want to get ip from router.
Clickon wireless settings enable wireless then enable WEP Security then add WEP code .It isyour password to connect wi fi.Then save settings and restart router.
Then you can connect your wi fi network with that code.
Let me know if you need further assistance.
Thanks for using FixYa.

Mar 28, 2010 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

I have some problem with my D-link Des-1008D switch.I used it to connect 2 computer in my home and one cable form Internet shop.At that time, that Internet shop used manual IP to connect PC.And then That...


Does your ISP supply _one_ or _two_ IP-addresses per account?

On each computer:
Click Start
Click Run
Type CMD and press ENTER
Type IPCONFIG and press ENTER

What "IP-address" and "gateway" do you get for each computer?

No, a "driver" for the switch is not necessary, and will not help.

Instead, buy a "router" (with or without wireless capability), and rewire your network:

Cable-modem -> Ethernet-cable -> WAN-port on router

LAN-port-#1 on router -> Ethernet-cable -> Computer #1
LAN-port-#2 on router -> Ethernet-cable -> Computer #2

Turn the cable-modem off.

Turn the cable-modem on.

Turn the router on, to get one IP-address from your ISP.

Restart each computer, to get new IP-addresses for each computer.

Within the web-browser on each computer, disable "auto detect proxy".

Nov 16, 2009 | D-Link DES 1008D (DES-1008D) 8x10/100 Mbps...

2 Answers

Wireless g router trouble no conectivity


You have to enable DHCP in your wi fi router.
For that connect your wi fi router to youe computer with ethernet cable.
Then access it with following link
http://192.168.1.1
or
http://192.168.0.1
type user as "admin" and password as "admin" or blank or "password"
then Enable DHCP.
Then save settings and exit router.
Also check your wi fi network adapter property Check TCP /IP settings enable ip get automatically.
Then it works fine.
Let me know if you need more assistance.
Thanks.

Sep 30, 2009 | Linksys Wireless-G WRT54G Router

2 Answers

Having troble connecting to internet, an it has to do with the computer


try to turn off your wifi button then turn it on after 1min. or go to network connection and check your ip, it should be obtain the ip address automatically.

Sep 29, 2009 | Computers & Internet

1 Answer

Problem replacing 4 port hub with 8 port switch for home network.


You can obtain IP details for Preferred DNS server & Alternate DNS server from your internet service provider.
5a6e89b.jpg

don't use automatic ip addresses.

best regards,
Krishan.

May 08, 2009 | NetGear FS108 Networking Switch

1 Answer

Please Help! My IP is driving me crazy!


modem only transmits signal.

router talks to your provider and gets IP address from them, depending on your subscription, you may have a static or dynamic IP.

your computer gets internal (home network) IP from the router, you don't have to worry about that since it is the router's IP address that is seen on the internet (router splits / shares a single internet connection in home networks).

about wireless connection from computers/wi-fi gadgets to the router, must configure the router with the ff:

wireless network name (aka SSID)
security type (WPA/WEP) and password/passphrase/security key
channel (1-12)

the above info must be then set to the connecting computers/gadgets

about wired connection: a working ethernet cable (looks like a phone cord but fatter) and a working computer/gadget ethernet port.


Wii will work - check Wii's website for connectivity options / instructions.

Dec 18, 2008 | NetGear WGR614 Router

3 Answers

D-link cant accesed internet 4pc


Most of DSL modems are connected to PC with USB cable...
n if ur server is connected with other pc on lan .. you can use internet sharing option available in winxp.

Following are the steps to enable Internetsharing for other pcs.


How to use Internet Connection Sharing loadTOCNode(2, 'summary'); To use Internet Connection Sharing to share your Internet connection, the host computer must have one network adapter that is configured to connect to the internal network, and one network adapter or modem that is configured to connect to the Internet.

On the host computer loadTOCNode(3, 'summary'); On the host computer, follow these steps to share the Internet connection:
  1. Log on to the host computer as Administrator or as Owner.
  2. Click Start, and then click Control Panel.
  3. Click Network and Internet Connections.
  4. Click Network Connections.
  5. Right-click the connection that you use to connect to the Internet. For example, if you connect to the Internet by using a modem, right-click the connection that you want under Dial-up.
  6. Click Properties.
  7. Click the Advanced tab.
  8. Under Internet Connection Sharing, select the Allow other network users to connect through this computer's Internet connection check box.
  9. If you are sharing a dial-up Internet connection, select the Establish a dial-up connection whenever a computer on my network attempts to access the Internet check box if you want to permit your computer to automatically connect to the Internet.
  10. Click OK. You receive the following message: When Internet Connection Sharing is enabled, your LAN adapter will be set to use IP
    address 192.168.0.1. Your computer may lose connectivity with other computers on
    your network. If these other computers have static IP addresses, it is a good idea to set them
    to obtain their IP addresses automatically. Are you sure you want to enable Internet
    Connection Sharing?
  11. Click Yes.
The connection to the Internet is shared to other computers on the local area network (LAN). The network adapter that is connected to the LAN is configured with a static IP address of 192.168.0.1 and a subnet mask of 255.255.255.0

let me know if it helps.

best regards,



Nov 03, 2008 | D-Link DGS-1008D 8-Port Gigabit Ethernet...

2 Answers

Lg r 405 will not recognize wireless signal from lynksys wrt350n


hi i would suggest to access your routers setuppage and set the channel to channel 11.

make sure also if your wireless network is secured, type the correct key those things are case sensitive.

to access the routers setuppage go to a computers that is connected to your linksys router (wired) then launch IE on the address bar type 192.168.1.1(this is the routers ip) then it will ask you for username and password for the username dont type any thing for the password type admin.

when your on the setuppage click on wireless tab. while on the wireless page set the channel to 11.

after that click apply or save settings on the page.

then after that try to connect to your wireless network on your laptop.



for further help you can call linksys hot line 1800-3267114
they will surely help you with this.

hope this helps.

Oct 19, 2008 | LG X-Note LM50 Notebook

1 Answer

Internet sharing


Hi, Could be done. On the Dell XP - 1. Activate your Internet Connection Sharing. Go to Control Panel, Click on Network Connections, right click on your Local Area Connection, Properties, Advanced tab, check Allow other network users to connect through this computer's internet connection. In Home networking connection, choose "Local Area Connection", OK; 2. Back to General settings, click on Internet Protocol (TCP/IP), click on Properties, tick Use the following IP address: IP address 192.168.0.1, Subnet mask 255.255.255.0, Default gateway 192.168.0.1, if you know ITT DNS use them otherwise tick "Obtain DNS server address automatically." You have to connect the DellXP with the DellVista using a crossover networking cable. On the Dell Vista- 1. In your Network Connections, right click on your Local Area Connection, Properties, click on Internet Protocol (TCP/IP), click on Properties, tick Use the following IP address: IP address 192.168.0.2, Subnet mask 255.255.255.0, Default gateway 192.168.0.1, if you know ITT DNS use them otherwise tick "Obtain DNS server address automatically." The above method will also work with peer to peer wireless networking. It might also facilitate connection if you enable auto-detect proxy settings in your browser. There are other methods. This is also better explained at Microsoft support Hope this be of help/idea. Post back how things turns up or should you need additional information. Good luck and kind regards.

Sep 30, 2007 | Computers & Internet

Not finding what you are looking for?
Compaq Presario C700T Notebook Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Compaq Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18384 Answers

Abhinandan  Patil
Abhinandan Patil

Level 3 Expert

568 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a Compaq Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...