Question about Panasonic TH-46PZ80 46 in. HDTV-Ready Plasma TV

1 Answer

No picture in HDMI

I have a Panasonic TH-42PZ80U that I bought in Sept 2008. All was well until today. I have sound but no picture. If I go to TV mode, not using the HDMI, I have a picture. But if I use HDMI the screen goes black. I can see the DVR/cable info, menus, etc just not the show I want to watch. Is this a problem with the HDMI cable, the cable signal, or the tv?

Posted by on

  • Sheldon Scott
    Sheldon Scott May 11, 2010

    Are you plugged into a cable box?

  • Anonymous Mar 12, 2014

    Picture is too dark

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

After reading tips on this site I did a manual reboot of my cable box. Sure enough, that had been the problem. I'm going to keep a watch on it from now on; if it happens again, I'll call for a new DVR/cable box. Thanks for all the info on this site!

Posted on Jan 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi my led tv UE46D500 has no picture only sound.unplug for few hours and the picture comes back.now I have this problem every day sometimes I got the picture and sumtime no picture whole day. Help pls


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electro-medical.blogspot.com/
To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board...

Jan 10, 2017 | Samsung UE46D5000 116.8 cm 46" 1080p...

1 Answer

Just bought a new smart tv and my panasonic recorder keeps saying not connected - why


Usually this message is because there is no direct connection between the recorder and the TV!

where do you see the message, if on the recorder then check cable connections! if on TV then turn on the recorder!

Jan 07, 2017 | Panasonic Televison & Video

1 Answer

To begin with I have Dish network my TV went off and since then in order to have picture and sound i have hookup HDMI cable and also video cable to have picture and sound


You need to set up the dish box for the correct resolution ie 720/1080 etc.
ELECTREPAIRUSA@ELECTREPAIRUSA or you can contact us at that address as we repair/renovate all items electronic and electrical old and new.

Jan 05, 2017 | DISH Network Televison & Video

1 Answer

I have checked cables and different methods of connecting, but the white and red audio out of my PVR appear to have stopped putting out sound.


Go through the setup of the PVR and check the sound settings. It sounds like it's only producing digital audio, that's why it works with HDMI but you want analog, so set the audio to stereo, or try every setting to see what works!

Jan 19, 2015 | Televison & Video

1 Answer

I have a toshiba LED TV Model 40PB200, i bought it two months now. Recently, the audio in port started producing a sound as if microphone is on and the VGA for computer flickers when i connect a laptop on...


One thing is that unless it is usb you should always have the devices powered DOWN before connecting them via" wire electric data cables". it only takes 3 static volts of electricity to damage a circuit board. when you zap you buddy when you wear sox its 20 to 30,000 volts of static electricity so 3 volts would not be known let alone felt or seen. Power down and you will be well not you .

Sep 30, 2013 | Televison & Video

1 Answer

I have a bell satellite reciever, I am trying to hook up a second tv to the hdmi output, I hooked up a hdmi splitter! but it does not seem to work. I get a picture on only one tv and no sound. when I...


NO YOURE NOT WASTING YOURE TIME YOU JUST NEED TO PUT THE MAIN CABLE FROM THE STAELLITE INTO TO WHERE IT SAYS IN AND THE OTHERS CABLES IN WHERE IT SAYS OUT AND OUT AGAIN

Apr 21, 2011 | Toshiba 26HF85 26 in. Television

Not finding what you are looking for?
Panasonic TH-46PZ80 46 in. HDTV-Ready Plasma TV Logo

277 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

The Knight
The Knight

Level 3 Expert

69570 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...