Bought truck w/system alrdy installed. I have no manuel re the functions and how to program system. I have pushed the reset button but now I have a differnt time zone. My time zone is Central and this system is showing the time two hours back.
1. Where can I get a manuel
2. How can I program it to what I need
3. Do I need to subscribe to a differnt satellite company, currently with XM/Sirus
Go to the Pioneerelectronics website and the instruction manual is there in pdf format you can view and print. You will have to select in dash navigation system and just click on any one then click on older models.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
what i did is, i went into the destination window and pressed the settings tab, then i pressed the hardware information after that i pressed the 3d calibration and then i cleared the section where it said hybrid 3d. after a while it worked fine.
In order to watch the AV source in the AVIC-D2 or to have all the NAVI function while driving you must do the following: 1. Ground the original parking wire (Must Do) 2. There will be a open pin in the wiring harness under the ground wire. You must also ground this pin. I just pulled the wire out from the cellular mute pin and stuck it in the new pin and grounded it.