Question about Home

1 Answer

Manual for LXI color t.v. (need code)

I have a LXI 19in. color t.v. and I have to turn on and off maually, first let me explain I lost the remote control and then I bought one from sears and it did not work, so I sent it back, not realizing it must need the code and then could not find my manual, so in the meantime I bought one of those large giant remote controls, but I do not have the manual, do you have a list that would have the manual to this t.v.

The model number is 304 490 1000
Serial number is 48910562
manuf. Dec, 1999.

Thank you
Marge Lowell

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert that hasĀ over 500 points.


    An expert who has answered 200 questions.

  • Expert
  • 225 Answers

Kindly try these codes: 012,024,036,037,040,048,051,074.To Program it you press and hold the TV button, then enter a three digit code then release the TV key. See if it controls the device. Good luck. hope this will help. regards

Posted on May 15, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My water is not heating in heated toilet seat

Hi Nayana.

I'm having a hard time locating a manual, but dug a few things up for the seat. It appears to have temperature adjustments - it's unclear if there are manual ones, or if this is only from the remote control. It also appears to have a separate water tank, rather than a built-in heater. There is also a wall power cord for the heater and other valving / controls / actuators.

If the water is not heating, it could mean that:
  1. The water heater is not ever heating up the water, so you have water the temperature it came in at. That could be a bad heater element, or a broken temperature sensor. Any commercial device heating things that come into contact with people will be built so that if the temperature sensor fails, or a wire breaks, it'll default to not heating. That prevents fires and scalding. This may mean replacing the tank, the heater element, or the temp sensor. You'd have to take that up with the manufacturer.
  2. The temperature control hardware is malfunctioning. If it thinks the water is hot, even if it isn't then it won't heat it. Whatever sets the water temp, see if there's any change as you change the setting.
  3. The water is hot, but is cooling off before it gets to you. Not likely unless you have a hundred-foot-long transfer pipe from the tank.
  4. If it's the seat specifically and not the water, I don't know if the seat is heated by the water, or by an electric heater element. That could again be an issue of heater element, temperature sensor, or what temperature the control thinks it's set for.
  5. The system is unpowered. I don't know if the spray will still work if the system is unplugged. if it is unplugged, then you won't get heat. The reviews specifically say it's tapped into the wall water supply for the toilet, so it'll be cold water coming in.
I hope that helps you narrow it down. Do also make sure the batteries in the remote aren't dead. One review I saw said the remote tends to eat them quickly.

Happy Holidays!

Dec 12, 2015 | AMDM Intelliseat - The Ultimate Bidet...

2 Answers

The remote for intelliseat doesnt work, even with brand new batteries. Any ideas?

My remote worked but the blower would not respond. If that's the issue, take the label off the remote (the corner by the heater button) and put a piece of aluminum tape over the contacts so there is a better connection. I also got a new one from AMDM (under warranty then) but I am still using the first remote I fixed. AMDM customer service: 1-800-778-1450

Feb 13, 2015 | AMDM Intelliseat - The Ultimate Bidet...

1 Answer


Make sure the flapper is seating properly. If you can't tell, put some food coloring in the tank part... you will see color in the bowl.

Nov 02, 2014 | Danco Plastic Relief Valve Repair

1 Answer

Water is not hot

Heating needs to be turned on from the remote control. If the indicator is lit properly, then the heater is defective and must be repaired.

Feb 01, 2014 | AMDM Intelliseat - The Ultimate Bidet...

1 Answer

Danco instructions

Umm, yeah I think so....

Nov 10, 2013 | Danco Home

1 Answer

Remote isn't working for my Kohler C3-200

Sounds like bad remote that only works partially or some parts on toilet vent bad.

Apr 09, 2013 | Kohler C3-200 Elongated Toilet Seat

1 Answer

I bought intelliseat electronic toilet seat but i couldnt find the remote control for the seat :( What can i do ??

Nothing will operate without a functioning remote control; you'll need to buy one from the manufacturer. I recommend attaching the bracket to the wall, and Velcro-ing the remote into the bracket, so that it won't get lost or fall into water.

Mar 03, 2013 | AMDM Intelliseat - The Ultimate Bidet...

1 Answer

I cannot get the water hot enough and maitain the water pressure. The groved thing in center (after removing all hardware and sace plate) is missing the red/blue clips. I am a complete novice and don't...

pegasus is a home depot product u need to adjust ur anti scald setting the valve is shipped in cold position it should have a red and blue plastic clips that go over the grooved thing call pegasus customer service at 1888 328-2383 they should be able to assist u with ur problem if u need parts or how to adjust the anti scald system

Jan 03, 2010 | Union Pegasus F1228100PBV Series 5000...

1 Answer

Toto toilet Power Gravity intermittently running

You need to either bend the arm that connects tot he float down (if it is the type with the ball float) or adjust the height of the fill valve assembly. THis accomplished by slightly twisting the valve assembly carefully and sliding down a half of an inch or so and then twisting back to lock it in place.

This should fix you up right.

Apr 29, 2009 | Toto Round Carusoe Two Piece Toilet, 1.6...

1 Answer

New Pegasus Dual Flush Toilet Water does not enter Toilet bowl

There is a small plastic tube that comes from the fill valve and attaches onto the overflow tube on the flush valve. If no water is coming out of that tube, then it is clogged internally. You can remove the tube from the fill valve and take a small piece of wire or a straight pin to try and clear it from the outside. If that doesn't work, then I would recommend replacing the fill valve. They are inexpensive to replace. If you don't know how to get into the fill valve's internal guts at the top, then I would recommend replacement of the valve. One more thing, there also could be a water saver where the outlet is on the little tube I just explained. It is usually light blue, you can remove that and discard it.

Mar 21, 2009 | Pegasus Technologies Pegasus Toilet Paper...

Not finding what you are looking for?
Home Logo

Related Topics:

372 people viewed this question

Ask a Question

Usually answered in minutes!

Top Home Experts

Donni Steen

Level 3 Expert

645 Answers

john h

Level 3 Expert

7409 Answers

Brad Brown

Level 3 Expert

13822 Answers

Are you a Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides