Question about Remote Controls

1 Answer

Magnasonic MCT5555 TV remote control will cycle through 02 - 32 but when trying to go above 32 it returns to 02. I can manually select any number above 32 say 43, 55 etc. but will not cycle up on remote. When on say 48 and I try to cycle up it returns to 02. I am on Rogers Cable in Mississauga. Battries in remote are new.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Steve from Magnasonic 800 663 5854 solved the problem. It must have been finger problems - somehow someone programmed the remote unintentionally. Steve had me turn on the TV and press 02 | RESET | AUTO -- the tv cycled through all the channels -- and that cured the problem.

Posted on Jan 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I purchased a universal rca remote. On the back card it listed as one of the brand name tvs magnasonic which is my tv. When i got it home there was no code listed on the paper inside for my tv. I tried...


Hi Bonnie,

I understand your frustration. RCA / Thompson Consumer Electronics has made dozens of different model universal remotes control devices. Without knowing your particular model number, it's hard to give a good answer.

I found a list of RCA codes here, and some others elsewhere - but none included the Magnasonic brand TV you have. If you have gone through the code search feature of the remote without any luck, it is probably because the TV is not supported by the RCA remote control. Not every TV, VCR, DVD, etc. is supported.

You may find that you'll have to return the RCA device and obtain a Magnasonic brand remote to operate your TV. You can view Magnasonic's Customer Support page here.

Good luck!

May 22, 2012 | RCA Remote Controls

4 Answers

Unwanted channel display in middle of screen


TO REMOVE CHANNELSscreen13.gif 1. Press the MENU button on the remote control to open the OSD.
2. Press the Navigation (UP/DOWN) buttons to select the Setup menu.
3. Press OK to open the menu.
4. Press the Navigation (UP/DOWN) buttons to select MANUAL SEARCH.
5. Press OK to select.
6. Select the channel you want to delete from the channel list.
7. Press the Navigation (LEFT) toErase Channel.
8. Press EXIT to close the OSD.

Feb 29, 2008 | Remote Controls

1 Answer

Have all for one 4110 - need code for magnasonic


http://www.hifi-remote.com/ofaold/tvcode.html
MAGNASONIC 017,019,030,153,154,156,193,093,179
Should be one of these. If not try the website.

Oct 25, 2009 | Remote Controls

1 Answer

Magnasonic tv need remote


Check out a site like www.remotecontrolscenter.com or go on to google and search for "Magnasonic Model Number Remote Control" and you should be able to find more information about the exact remote control you need.

Oct 02, 2009 | Remote Controls

1 Answer

I need a code for a sony remote for a maganasonic dvd player


You did not specify if is tv, dvd, vcr
try:
SONY DVD PAYER: 0533, 1533, 0864, 1033.
SONY DVD PLAYER/VCR COMBO: 0864.
SONY TV:0000, 1100, 0810
SONY TV/VCR COMBOS: 0000, 1232
MAGNASONIC TV/VCR COMBO: 1278
MAGNASONIC VCR:1278
SONY VCR: 0035, 0032, 0033, 0000, 1232, 0636

Jan 26, 2009 | One For All URC-4330 Remote Control

1 Answer

No code for magnasonic tv from a px-rc1 remote


try 1928 or 1913
go to the website below for instructions
http://www.rcinfo.com/152142.htm

Dec 27, 2008 | Radio Shack 15-2142 Remote Control

1 Answer

I cant set my universal remote to my magnasonic tv


TV Can Not Be Programmed on this remote. Sorry.

=> http://remotes.com/remotes/documents/RCA/257003.pdf

Dec 24, 2008 | RCA 257003 Remote Control

1 Answer

Code for Magnasonic TV


If the GE doesn't have a code scan function (similar to ExpressVu remotes) then you can always buy a programmable remote such as the Logitec Harmony. I tried it and it works fine on my Magnasonic GCT5501.

Sep 19, 2008 | Remote Controls

1 Answer

Code for the Magnasonic tv


Try searching for your code . This unit might not have your code. SEARCHING FOR YOUR CODE
If your device does not respond to the remote control after trying all codes
listed for your brand, or if your brand is not listed at all, try searching for
your code.
NOTE: Before performing a code search for a DVD player or a VCR, turn on the device and
insert the required media.
For example, to search for a code for your TV:
1. On the remote control, press TV once.
2. Press and hold SET until the LED (red light) blinks twice,
then release SET.
3. Enter 9 - 9 - 1.The LED will blink twice.
4. Aim the remote control at the TV and slowly alternate
between pressing POWER and TV. Stop when the TV turns off
(after pressing POWER). If the device does not have a Power
key, you can substitute another function, such as digits 0 ~ 9 ,
CH, or PLAY).
NOTE: In the search mode, the remote control will send IR codes from
its library to the selected device, starting with the most popular code
first.
5. To lock in the code, press and release SET.The LED will
blink twice.
6. To search for the codes of your other devices, repeat steps
1 through 5, but substitute the appropriate device key for
the device you are searching for.
here is the maual for your remote:
http://www.ofausa.com/remote_manual/URC4...

Nov 19, 2007 | One For All URC-3021 Remote Control

6 Answers

Code for Magnasonic TV


I have magnasoni TV 14`` and I have Unversal remot RCA in need some help for codes thanks

Nov 06, 2007 | One For All URC-4330 Remote Control

Not finding what you are looking for?
Remote Controls Logo

Related Topics:

176 people viewed this question

Ask a Question

Usually answered in minutes!

Top Remote Controls Experts

The Knight
The Knight

Level 3 Expert

68352 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4759 Answers

Are you a Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...