This is the first time that I have heard of this issue. I use an hp 1320n to print checks for my company, to do so I require a Troy MICR dimm card. It has worked great for me for almost 4 years, and now (seemingly out of the blue) My printer stopped feeding properly. The page picks up from the tray (or the media feeder) just fine, prints most of the page and then stops halfway before finishing the job, and the computer indicates a paper jam. After clearing the paper about a thousand times, and troubleshooting everything I could find, I decided that I needed to switch printers, so I moved the dimm card, to another 1320 that I own, tried printing off of that, and was met with the same issue. They are both network connected, when I finall removed the dimm card, printing seems to work fine, but I can't print checks. I am not fully convinced that the card is truly the problem due to the fact that it doesn't really affect the print system. Has anyone else ever had "freezing printer" issues with the 1320n? Is this scenario familiar to anyone?
Thanks for anything that you can give!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi, Go to printers, right-click your HP 1320 and choose "Continue". The printer should change the status to ready after printing the remaining print job in memory. Hope i was of any help. If so, please rate me. Thank you.
You need to disconnect the USB cable and set it up wireless on both units:
Since it is plugged into the router, it should already have an IP address. Un-install the printer from the computers.
Then re-install the printer from the cd or from HP's website. When you get to the point where it ask you is the printer is attached to the computer or is it over the network. Choose over the net work and the software will find the printer IP and finish setting it up wireless.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it. Thanks, Joe
I have had a similar issue with both laserjet 3005N and 1320N machines setup as network printers on a windows 2003 print server. Both machines install correctly and print test pages but once you push to much of a print job to it (in my case it was a 12mb pdf file) the printer stops printing and never prints again for some reason. After a quick reboot a test page will print but what gives?? Buffer issues? Not enough ram? None of this makes sense since the printer displays nothing and just stops printNo test pages or anything. I tried re-installing it and rebooting it. Nothing.