Question about Kenmore 22422 Top Load Washer

1 Answer

Kenmore 70 series will not agitiate - model 110.24722300

A good start here would be to be able to get into the washer, which I am unable to do (so far)... The top is screwed to the sides- can't get to the screws... how do you get into this washer?

The washer fills and stops the water flow, but does not agitate. I do not hear any noise from the timer or anything else- totally silent. The switch for the lid does not make a clicking sound when it is depressed- might just be this. But I need to get inside the washer to do anything...

Posted by on

  • 2 more comments 
  • imnotdeadyet Jan 14, 2009

    Thanks. I tried that, but the top is screwed in all 4 corners to the sides of the washer.I can see the screws but cannot get to them.

  • imnotdeadyet Jan 14, 2009

    I see the model number dropped out of the subject of the question- it is a model # 110.24722300. That should make a big difference....

  • imnotdeadtey May 11, 2010

    Thanks again, but neither of those worked. Both are totally different from my washer. Taking the console off does not even appear to be the way to get into this thing. I figure it must be a way to take the back off, or the whole top and sides from the bottom. This one is strange. Any other ideas that I might try?

  • imnotdeadtey May 11, 2010

    Thanks very much, I will check them out and let you know. Thanks again!



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 716 Answers

You Can Pop The Top off The Unit Like A Stove Top. If Your Not Familiar Grab A Big Flat Head Then Pry Up On The Top Edge Of The Dryer Where The Top Meets The Casing It Will Pop Off. The Lid Switch Often Clicks Just So You Know. Does It Spin Of Anything?

Posted on Jan 14, 2009

  • Michael Fisher
    Michael Fisher Jan 14, 2009

    If Its The Model You Selected The Please View This Other Fixya
    Thread." target="_blank" rel="nofollow" >Click Here
    Happy Fixing And Thanks For Using
    Michael Scott

  • Michael Fisher
    Michael Fisher Jan 14, 2009

    Heres A Thread On That One Its For Replacing Another Part But Describes Disassembly. Click Here
    Hope I Got It This Time lol
    Happy Fixing Once Again And For Using
    Michael Scott



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What is the capacity of the Kenmore 70 series model#11022722101

In the Kenmore line of washers and dyers, the 70 Series is a mid-priced family appliance that handles an average family's laundry needs. All appliances in the 70 series are freestanding and do not have stackable units. Available with both English and Spanish instructions, this mid-line series of appliances is suitable for almost any household needs. Kenmore Series 70 Specifications eHow

Jun 08, 2015 | Kenmore Washing Machines

1 Answer

Kenmore Washer 70 series Model #110.22722100 won't spin

Check door switch: If the lid switch is bad it will not drain or spin. Try this test: With lid open let it finish wash cycle. Press lid switch down with screwdriver. Washer should begin draining. Release switch. Motor should stop. Press switch a second time. Washer should start spinning as it continues to drain. If motor doesn't come on while lid switch is pressed, replace the switch. OR
Click if helped.

Feb 25, 2013 | Washing Machines

1 Answer

Kenmore heavy duty 70 series model 110-8237012

probably your drain pump leaking it has a seal right where it attaches to motor,,,,mine is leaking there but haven't replaced it yet! lol

Feb 27, 2010 | Kenmore Washing Machines

1 Answer

Kenmore 70 series filled and stopped...

Lid switch problem. Press down on lid and try to start machine. Reply.

Jun 15, 2009 | Kenmore 22422 Top Load Washer

2 Answers

What is the date of manufacturing based on the serial number of my Kenmore 70 series washer?

It came off of the Clyde, OH production line the 26'th week of 2001.

Amazing, ain't it? Seriously... the info is embedded in the serial number. Here's the link to the code sheet.

Please remember to rate this solution as "FixYa", OK?


May 02, 2009 | Kenmore 3.2 cu. ft. Plus Top Load Washer

2 Answers

Finding Lint Filter on Kenmore 70 Series Model 110

I've got a Kenmore 70 Series, Model # 82370120 washer and the lint filter in under the machine. I had to tip the thing over to get at it.

Apr 19, 2009 | Kenmore 22422 Top Load Washer

1 Answer

70 series kenmore washer won't agitate help model #82873120

No wash, no spin read THIS
Spins, pumps, won't agitate right: check THIS out

Mar 27, 2009 | Kenmore 22422 Top Load Washer

1 Answer

Kenmore 70 series washer will not spin, clothes are too wet

Not a belt, this is only a sound deadening devise on the brake housing. Not really needed. Replace the coupler

Jan 03, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore series 70 washer doesn't fill

check your incoming water supply, the buzzing sound is coming fromthe waterinlet valve , soundslikke its trying to fill. possible that the valve is no good as well,

Nov 23, 2008 | Kenmore 22422 Top Load Washer

Not finding what you are looking for?
Kenmore 22422 Top Load Washer Logo

348 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal De

Level 3 Expert

2696 Answers


Level 3 Expert

5677 Answers

Jim Goldsmith
Jim Goldsmith

Level 3 Expert

2005 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides