Question about Air Conditioners

1 Answer

The furnace "runs"... you can hear it click and want to turn on but the blower doesnt come on. The blower works if I set the thermostat to ventilate though.

Posted by on

  • Anonymous Jan 14, 2009

    turn it off then back on furnace clicks on than shuts off element wont ignite

  • Danny Clark
    Danny Clark May 11, 2010

    Turn off power right there at the unit.

    Wait 5, then turn on power. Watch the unit very closely and report back exactly what it does or does not do in detail. We can then help you from there.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 405 Answers

Your flame detector circuit is bad. The heater never lights, so the blower never comes on. Another thing would be the temperature sensors mount on the duct close to the burners.

Posted on Jan 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2014 Heartland Fairfield 405fl (extendend stay) Suburban SF42-Q furnace Does anybody know of any Mobile RV Mechanics in San Jose Ca (Bay Area-South)? Our furnace blower fan went whacky and broke the cage....


Go to Bryantrv.com and click on the Service Manuals link. It sounds like he missed a wire hooking it back up. There are usually 3 wires, red for hot, connected to the furnace and also a small blue wire with a red stripe, another small blue wire connected to varying colors but comes from the thermostat and a ground, usually yellow. There is a relay on the fan side of the furnace and a thermal safety on the back side, under the burner. The fan gets it's power from this relay and the furnace will not run until the fan is turning. It's common for the relay to go bad but I've only had to replace on thermal fuse in the last 12 years.

Mar 16, 2015 | Air Conditioners

1 Answer

York diamond 90 furnace burners won't ignite ... igniter glows for a few seconds then clicks off, no burner ignition. Tried resetting the furnace by powering off and then setting thermostat to call for...


The thermocouple could be defective. If this is a high efficiency York furnace, the stack blower should start and run first. If it doesn't the blower controller may have failed.

Dec 06, 2013 | Air Conditioners

1 Answer

Suburban SF30FQ furnace doesn't run. Has power to unit and can hear relay click in unit when call for heat but blower does not run.


Please give make, model, year etc of RV that furnace is in. Thermostat on wall operates heat and cool?

Oct 10, 2013 | Dometic Rooftop RV Air Conditioner

1 Answer

FURNACE WON'T TURN ON: I have a 1999 Fleetwood, Prowler RV. The furnace won't turn on.


Check the exhaust port of the furnace. Wasps like to build nests in there and it will not allow the furnace to ignite if blocked. You have a gas detector and it is turned on I assume? I forgot this many times.

Apr 20, 2013 | Air Conditioners

1 Answer

Why does my Colman EB10C electric heater start & run for a few seconds,stop, then restart & run?


check your high limit switch find blower motor and unplug white wire let furnace run it should shut off when hot enough if same problem replace high limit switch

Jan 04, 2013 | Coleman Mobile Modular Home Electric...

1 Answer

Coleman mach furnace wont stay running. i turn the thermostat down until i hear it click, then i turn it back up to get the furnace to kick on.works sometimes and sometimes not. blower will always kick on...


Hi, I don't know if you are still having a problem, but it sound like the flame sensor on the unit is dirty and need to be cleaned. If it has a automatic pilot, it will have a flame sensor. Its made of porcelin with a metal rod coming out the end, laying next to the pilot flame. Just 1 screw holds it in place. Remove it and clean the tip with steel wool or a piece of sanding cloth. If you don't have this set up, I would need more info on the unit, model and serial number. You may also have a faulty thermostat, but I do believe it is a flame sensor.
Shastalaker7

Nov 21, 2011 | Coleman Mach III Air Conditioner

1 Answer

My coleman evcon fan motor does not come on. I put the thermostat to on so the fan would run but it will not come on. The rest of the furnace runs properly.


Did you check to see if you have power or fuse blown? If it is a furnace/ air handler and you are comfortable with electricity. Turn
Power off, remove blower door. Find where thermostat wires come into the control board and remove them. If you can find a jumper wire or aligator clips, hook them between R and G. Put blower
door back on and turn on power,

Fan should come on right away, if it does you might have a thermostat problem. If nothing happens but you can hear it hum
or hear nothing at all. Then more than likely the capacitor is bad and or the motor is bad.

Aug 04, 2010 | Coleman Air Conditioners

1 Answer

Furnace runs but won't ignite.


Error code 12 is blower on after power up. Meaning: after you turn on power to the furnace for aprox. 60-90 seconds the blower will run. The blower should then shut down and the furnace should go through the start up process, providing that the thermostat is set for and calling for heat. If the furnace fails to start after blower shut down there should be a new fault/error code. However if the blower continues to run longer then 90 seconds and continues with the same fault code more then likely the circuit board is bad. Please let me know if this was helpful and give me a rating. Good luck.

Feb 08, 2009 | Carrier XHB123D X/Y Series Heat/Cool Air...

1 Answer

Intertherm heating


My heating unit is blowing cool air. The thermostat will start the blower when the unit is turned on at the thermostat, but the air isn't hot. But,when I turn the unit on at the furnace/blower using the "Fan On" button, I can see the heating element heat up. After the blower starts the heating element does out. What could be the problem?

Oct 29, 2008 | Intertherm P3RA-048K Air Conditioner

Not finding what you are looking for?
Air Conditioners Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Air Conditioners Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Bill Long

Level 3 Expert

577 Answers

Tim Whalen

Level 3 Expert

3056 Answers

Are you an Air Conditioner Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...