Hello! Our Roberts Gemini 46 is practically new but typically we have lost the guarantee! When you press the on/off button,the LCD shows 'Roberts' then 'tuning' and then turns itself off. Would be most grateful for your help! Thanking you in anticipation of soon being able to hear again that we are all doomed and there will be no toast for breakfast tomorrow!

Warning: All applications and personal files contained on the tablet will be erased. Only do this if you are unable to start your tablet.

1. First, ensure the tablet has been switched off.
2. Hold both the VOL+ and POWER buttons until the Gemini logo appears. Release both buttons.
3. You should see a green robot on the screen with a red warning sign.
4. Press & hold POWER then press VOL+ once, then release the POWER button. A menu will show on-screen.
5. Using the VOL+ and VOL- keys you can move up and down to select the Factory reset option. Press POWER to select this option, then move down to YES and press POWER again.
6. Once completed, press POWER to restart the unit.

You could do a hard restart but it will wipe all your data.
Turn off tablet.
Hold VolUP and POWER buttons until the Gemini logo appears.
A green robot with a red warning sign will appear.
Press and hold POWER, press VolUP once, release the POWER button. A menu will show on-screen.
With the VolUP and VolDOWN keys you can move up and down. Press POWER to select.
Select Factory Reset.
Then select YES.
Press POWER to restart.

I have one of these. It is probably set up for some other program like the HDMI or Input 1 through 5.
You can press your INPUT button, then scroll to the TV function, which should show up on the top.

you need reset your ink purge counter: to do this:

1. press menu, press 4times mono copy button (this will be doing fastly in a 5second)
2. press up button until you get the number 8 on your LCD
3. press the ok button
4. press the up button until you get the nuber 0 displayed
5. press the up button until you read (purge count) displayed on your lcd
6. press the up button until you get the nuber 2 displayed
7. press the ok button
8. press the up botton untill you get the number 7 displayed
9. press the ok button
10. press the up button untill you get the number 8 displayed
11. press the ok button
12. press the up buton untill you get the number 3 displayed
13. press the ok button
14. press stop button to exit
15. resart your printer and the error will not appear again

LCD Screen replacement not practical.Tv companies don't sell them out,if they do it cost about the same as the new tv.

http://www.kitchenaid.ca/assets/pdfs/literature/8113P363-60.PDF

http://www.kitchenaid.ca/assets/pdfs/literature/8113p293.pdf

Lcd and PlasmaPanels typically run from $900.00 to $1500.00 retail. If you have a trained samsung tech replace the Panel, you are looking at or near the cost of a new tv all said and done.

hold down mode button until display flashes, change time with up/down buttons. Press mode button once to change to date use up/down to move through dates, the time display will show year you are in the further you press the up button the further in the future you will scroll. This radio holds date & day information depending on the year displayed. Leave flashing to time out after adjusting.

Hello Steve
Welcome

You said , We lost the instruction manual...can someone show me how to turn on the self-cleaning function on both the upper and lower ovens? Thanks, Steve O.

The instructions are to long to put in here and will not fit.
so here is what you asked for at the original site.
Whirlpool owns Maytag now so your manual is at this site and the cleaning page starts on page 12.

http://shared.whirlpoolcorp.com/assets/pdfs/literature/8113p293.pdf

Thank you for using Fixya,
Huuum
Please remember to leave a solved rating!

A wonderful feature is that the ovens self-clean with the press of a few buttons. Only one oven can be programmed to self-clean at a time. Remove the oven racks. Turn off the oven light and close the door. Press the "Clean" button and then press "Auto Set" to automatically clean the oven for 3 hours. Press the "Auto Set" pad again to set the oven for a 4-hour clean cycle, or press the button one more time for a 2-hour cleaning. The oven locks when in cleaning mode. When the oven is finished cleaning, the word "Cleaned" will be displayed on the control panel, and the oven will remain locked until the oven has cooled, which takes about an hour. To cancel the self-clean cycle, just press the "Cancel" button. Simple!