Question about Symbol MC1000 Portable Terminal

1 Answer

I cannot transfer the data from MC1000PDT to my computer

Window prompt when i click the GET Data.exe "The application has failed to initiliazed properly"

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

That's usually a DLL error - reboot.

Posted on Jan 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Your friend has a Windows XP desktop system that contains important data. He frantically calls you to say that when he turns on the computer, the lights on the front panel light up and he can hear the...


Without trying any experiment I suggest that your friend take the hard disc and recover all the data after attaching the hard disc to a PC or get help from any PC service to give you the cables for transfering to a laptop through the USB.

Apr 26, 2011 | Barcode Scanners

1 Answer

I have this problem on my Canon MP210 Scanner that doesn't work! I even re-installed the driver, but nothing worked but the copier works. That mean that the hardware works correctly.


First try a different data cable and a different port. If you use a USB hub or print server, try a direct connection. Check that a known working device can connect to the computer. Check the device manager and power saving settings. What message do you see in the Devices and Printers window (Printers and Faxes for Win XP) for the MP210? What error messages do you for printing and scanning?

For Windows 7, Start > Control Panel > Hardware and Sound > Device Manager. Look for a triangle with a yellow exclamation point or a red x at the bottom of the list at Universal Serial Bus Controllers. You can try updating the drivers for the USB controller or uninstalling them and then rebooting the machine. (The computer should find and install new drivers automatically. However, you should also check in Windows Update for them (check for new updates - optional and important).) With some computers this could be the result of static at the USB ports. Disconnect all of the external devices and the power cord (computer and the outlet). For a laptop, also remove the battery. Then press and hold the power button for 30 seconds. Then put the battery back in (if applicable) and reconnect all of your cables.

For the power savings settings, again for Windows 7, right click on the desktop (anywhere there are no icons or running programs). Select Personalize. Then click on Screen Saver then choose Change Plan Settings. Next click on Change Plan Settings (for the active plan). Then click on Advanced Plan Settings. Scroll down to USB selective suspend.

Did you install the Canon driver, full software or the OS driver? Can you print any documents? (Sometimes the scanner will not respond but the printer still works.) If you have documents in the print spooler, you may need to stop and restart the spooler. (One way to do this is to launch the Command Prompt window (run as administrator for Vista or Windows 7). Start > All Programs > Accessories > right click on Command Prompt and choose Run As Administrator. Type "net stop spooler" without the quotes followed by enter. On the next line, type "net start spooler" again without the quotes and press enter. Now restart the computer.

If the printer works, but the scan buttons do not. If you connected the USB cable before installing the Canon driver, you have a generic driver that may not run the scanner. Uninstall the driver, unplug the data cable and then reboot the computer. Then install the full featured software (if available) from Canon http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp210?selectedName=Specifications#DriversAndSoftware . Next try to scan from the computer. You need to set up the full software with destinations for the scanner buttons and the monitoring program must be running. (If you use the basic driver, the scan buttons will not work. In Windows XP, Vista or 7, you can acquire scans with Paint. File > Import from Camera or Scanner > New Scan. Vista comes with Photo Gallery that can also do this (it can be downloaded for XP and Win7). Vista and Windows 7 also include Windows Fax and Scan to acquire scans.

If the unit still fails to work at the current computer, try connecting it to another (with known working USB ports). If it still fails, then the USB port has failed in the all-in-one. This could be another static issue. With the printer on, unplug the cables (data and power from the printer, outlet and the computer). Press and hold the power button for 30 seconds to a minute. If this doesn't help, if the printer is under warranty ask Canon to repair it.

I hope this helps.

Cindy Wellls

Apr 24, 2011 | Barcode Scanners

1 Answer

My usb flash disk suddenly stops working properl when i transfer a file...i cannot find it in my computer..but it connects properly.. what will i do..


Files on a flash drive canbe corrupted if it is not removed from the USB port properly.
Before removing the flash drive click on the Safely Remove Hardware icon andthen click on the flash drive you want to remove and then remove the flashdrive when the computer message says it is Safe to remove.
To restore the flash drive to working order you need to format the flash drive,BUT you will lose the data stored on the flash drive.
If you need the data on the flash drive these WEB sites may help: -
Data and Digital Photo Recovery
www.artplus.hr/adapps/eng/dpr.htm www.CardRecovery.com

Mar 21, 2011 | Barcode Scanners

1 Answer

Hello, I have a Samsung 3g 2TB external hard disk drive. Sometimes it makes a knocking noise, Then the pc freezed. sometimes it dont a i can transfer data. if the pc freezed i must reset the pc.


A knocking sound means your harddrive has either a bad head or a bad sector. This would also explain your freezing up, because your computer is unable to pull data from the drive.

To ensure that all of your data is safe i would follow these steps.

1: Do not continue using the computer without backing up your data.
2: Create a folder on your desktop
3: Drag the data from the drive to your computer. ( if not possible you may need to see a specialist)
4: If the drive is under warranty contact the manufacturer, if not you may be able to return it to the store in which you purchased it.

** Just remember, the more you use it the more likely it will completely fail and your data will be lost.**

Mar 07, 2011 | Barcode Scanners

7 Answers

Removal of shortcut virus in pen drive


Is this the Problem???
Only Shortcuts,,,,,, _68.gif

Don't format your Flash Drive.
Your data is still there.

Use Shortcut Virus Remover.
  • 100% free
  • Setup file to download 1.1 Mb
  • Installed file 2 Kb
It will recover your all data.

DOWNLOAD !!!

Sep 03, 2010 | Online Barcode Scanners

2 Answers

Cannot Get Symbol m2004-i290 cyclone to work with Beetle /M


When connecting to a serial port there are a couple of things that could be causing the issue. The biggest problems are usually one of these:
  1. The app does not accept serial data.
  2. The RS-232 settings of the scanner and serial application do not match.
  3. The cable issue.
  4. The data is not using the termination character the application needs.
Are you using a Symbol 25-32465-20 or CBA-R01-S07PAR cable?

If so, do you know for sure your application accepts serial data? The scanner puts the data on the COM port and the application takes it from there. A good test is to try the scanner in Hyper Terminal if you have it. It is usually listed under: Programs>Accessories>Communications.

The M2004 series scanners default to 9600 baud (or bits per second), 8 data bits, 1 stop bit, no parity and no hardware or software flow control.

When starting HyperTerminal you may have to go through a screen that asks for a phone number. Just enter something and click OK to get to the next screen (sorry I can not remember exactly what that screen looks like- once it is set you do not see it again.) Next will be the Connection Description window. You will name the session (name it anything you would like) then click OK. Next is the Connect To box. Select your COM port in the Connect Using box, the first three boxes do not matter. When you click OK a Properties window will open. Most likely you will only have to change the Bits per second to 9600 and the Flow control to None. When you click OK your session should be active. You will have a blinking cursor in the upper left corner and in the bottom left portion of the window you should see the session time counting up. You can now try to scan a barcode. If the data shows up you know the scanner and cable are both working.

If you know your application accepts serial data (Word, Notepad, Excel do not) then it may be the application needs to see a carriage return at the end of the data. The CR is added by scanning Scan Options, Data Suffix, Enter from the M2000 Series Product Reference Guide. Test the scanner. If you still do not get data scan Scan Suffix, 1,0,1,3. Again all of these barcodes are in the M2000 PRG which can be obtained here:
http://support.symbol.com/support/search.do?cmd=displayKC&docType=kc&externalId=3969606apdf&sliceId=&dialogID=116516744&stateId=0%200%2011867900

Hopefully this information will be helpful in getting the M2004 working.

Jul 24, 2009 | Symbol M2004 Barcode Scanner

1 Answer

Error synchronising clock


I think after the installation of the scanner driver and the program you should check for the properties and then again restart the computer. if not re install the whole driver and program for the same. your problem would be solved

Oct 01, 2008 | Opticon OPN 2001 Mobile Data Collector...

2 Answers

Symbol PDT3100 TFT300 & File Transfer


I would like to suggest since you are approaching to GUI enviroment you need to develop system build by visual basic using MSCOMM control by sending and receiving data between PDT3100 and PC.

Please try to visit www.planetsourcecode.com for best VB tutorials about how to use MSCOM1 or hire/chat me if you need my further assistance.

Good luck,

Philip

Nov 04, 2007 | Symbol PDT 3100

Not finding what you are looking for?
Symbol MC1000 Portable Terminal Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Symbol Barcode Scanners Experts

Brian Friend

Level 2 Expert

132 Answers

ka4iup
ka4iup

Level 3 Expert

3944 Answers

Ngoro
Ngoro

Level 3 Expert

1111 Answers

Are you a Symbol Barcode Scanner Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...