Question about HP PSC 1210 All-In-One InkJet Printer

1 Answer

How do I get a alingment test - HP PSC 1210 All-In-One InkJet Printer

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • HP Master
  • 829 Answers

HP PSC 1200 and 1300 series:

  1. Turn on the HP PSC 1200 or 1300 series product.
  2. Disconnect the USB cable from the all-in-one.
  3. Press the sequence of front panel buttons below to start the print cartridge alignment process. The button-press sequence must be completed within ten seconds. It might take several tries to complete the sequence within ten seconds.
    1. Press and hold Cancel .
    2. While holding Cancel , press On .
    3. When the Check Paper and Check Print Cartridge lights begin to blink simultaneously, release both buttons.
    4. Press Cancel again.
    5. Press Copies .
    6. Press Paper Type .
    7. Press Color Start Copy . The alignment page will begin printing. If the alignment page does not print, repeat the button-press sequence in this step.
  4. When the alignment page has printed, place the page face down on the scanner glass and press Scan . The alignment is complete when the On light stops blinking.
  5. Reconnect the USB cable.

Posted on Jan 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

Print Driver Location for PC - Print Test Page


Click --> Start Button
go to --> Settings
Open --> Control Panel
in control panel open --> Printers and Faxes
open printer in question, a window will pop up
This should be your Print Que - any print jobs waiting will be listed here
click on --> Printer (some might have File, to the left on the menu)
on the menu select --> Properties

another window will open, this should be your printers properties,
This is where you will click on --> Print Test Page

here you can make changes to the configuration, some ink jets offer alingment and cleaning.

If you are able to sucessfully print a test page, your printer is working
if not check connection to printer
if strange characters are printed, replace the drivers..


26802b9.jpg





on Oct 26, 2008 | Sharp AR-164 Copier

1 Answer

I put in a new cartridge (56) and now my alingment


after replacing the cairtage printer needs alignment it gives a test page when we put it face down on scannes it starts the alignment...
on alignment process it doesn;t found the colour bands so it shows the alignment failure..........
pls install the new colour cairtge the it will give u the printout

thanks....

Jul 08, 2010 | HP PSC 2210 All-In-One InkJet Printer

1 Answer

Black ink keeps pushing out of cartridge


The problem is probably an ink build up on the black print head wiper on the service station. The wiper is supposed to clean the head but over time the ink builds up and evaporates and turns to tar. The wiper then fouls the head instead of cleaning it. Remove the left end cover and clean the service station wipers. Manual can be downloaded from here: www.lpscomputer.com/ec/manuals.htm

Jul 13, 2009 | HP DesignJet 750c plus InkJet Printer

1 Answer

Replaced the drum - light won't go out, not accepting new drum


MORE THAN THE DRUM JUST NEED TO BE SERVICE, THE ROLLERS NEED ADJUSTMENTS, TOLERANCES NEED TO BE SET, PHOTO PRINT TEST SHEET AND ALINGMENT AND ADJUSTMENTS, CONNECTION TEST, CLEAN MACHINE OF FORIERNG MATTERAIL, OLD TONER REMOVED AND OVERFLOW TONER REMOVED AND THE CORONA WIRES NEED TO BE SERVICE SO THE ELCTRO STATIC WORK PROPERLY. AND SO ON , IF YOU DO IT YOURSELF AND YOU BRAKE IT IT MAY COST YOU MORE IN THE LONG RUN BUT THAT IS UP TO YOU

ROD GANDY THE CANDYMANGANDY

Feb 09, 2009 | Sharp AL 1631 Copier

1 Answer

HP Officejet J5780 : copy's and scan's result : black page


Try to disconnect the power cable from the back of the unit and reconnect it after few secs. The alingment will start itself. Complete the alingment once.

Jan 26, 2009 | HP Officejet J5780 All-In-One InkJet...

1 Answer

Printing problems


hi, whenever u replace any of the cartrgs in the printer ,u first need to run the alingment procodure from the maintenence option, even if u have not replaced the cartg, run the alingment from the printer properties first, and then u can get a proper output. let me know

Dec 05, 2007 | HP DeskJet 5150 InkJet Printer

1 Answer

Test Page Prints Everytime Printer Cuts On


this is happen when you install an new catridge or refill one printer is automatically adjust the catridge by alingment so you do one thing when you switch on printer and it will print something just read the instrction and follow them bcoz you need to setup the alingment thing . when the print is come out just place it in to the scanner and just press the scan button the printer will store the setting and next time not print the extra page bcoz the setup is completed.

bye

Nov 02, 2007 | HP Photosmart C3180 All-In-One InkJet...

Not finding what you are looking for?
HP PSC 1210 All-In-One InkJet Printer Logo

298 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96627 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...