Question about Nintendo GameCube Console

4 Answers

Connecting intec gamecube screen

I revcently purchased a gamecube from ebay that has the video screen attached. The larger connection goes in the back of the cube where the cord to the tv would go but I have no idea where the other cable goes{the one with the tv cable looking end. please help me

Posted by on

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

The Intec Gamecube screen requires both a 12 volt DC input and the AV input. The larger connection is the AV cable which plugs into the back of the Gamecube console. The smaller round cable is the 12 volt DC input cable that goes to the power source for your screen. The solution is to either get the original splitter cable that splits the DC power to the screen and the Gamecube, or use separate 12 v DC inputs for each device. These original Intec splitter cables are rare and are not cheap, and the only place I have found them for sale is at the NES Repair Shop:

http://nesrepairshop.com/online_shopping/index.php?productID=645


connecting intec gamecube screen - dbccca0.jpg
The only other solution is having separate 12 v input cables for the screen and the Gamecube. And finding the right size (very small) is also a task.


Posted on Sep 19, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If you don't have the money for the splitter $50+ and want to try using two separate power sources a wd external hard drive power cord will work. I had model number ksas0241200150hu work. Sells on Amazon for $7

Posted on Feb 08, 2016

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

connecting intec gamecube screen - hook_gcn_mono.gif
Here i hopes this helps

Posted on Aug 30, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 80 Answers

There should be more connection slots in the bottom.

Posted on Jul 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

B button not working


You can try to tear the controller apart and see if the button is dislodged. Usually, the button that you press actually presses on to a smaller button underneath. You can see it that is out of place.

Sep 28, 2013 | Intec Video Game Consoles & Games

1 Answer

What do i use to get the screws out of the gamecube?


You need a special security screw bit to remove the gamecube screws. (Can be purchased off Ebay or retro video game stores)

Sep 04, 2013 | Nintendo GameCube Console

1 Answer

Just bought a racing wheel. Think it was made in 2008. no manual. I was told it would connect to a wii, but i cant get it to connect. where can i find a manual?


if your has the plugs for the ps2,gamecube,and one other I forget what tha last ones goes too but it will work on your Wii but only for gamecube games that's it I just got the G5285D and it only works for the gamecube games I do have a G5690 and that works for all wii games.

Feb 14, 2011 | Intec G5285 Racing Wheel Wheel And Pedals...

1 Answer

Where do i plug in the two plugs on the charger? box and directions got thrown.


The squarish plug goes into the back of your Wii where the power cord normally goes. The power cord for your Wii then goes into the back of the squarish plug. The round plug connected to the squarish plug then goes into the back of the charger.

Jan 03, 2011 | Intec Wii Induction Charger for Nintendo...

1 Answer

Intec xbox 360 remote does not work with my xbox


Many 3rd party company controllers don't work. I bought one before for my old gamecube and it didn't work. Intec sounds like a pretty reputable company, but I never heard of Intec. Your best bet for a cheap controller from a 3rd party is Madcats, they make good controllers for most consoles. What you should do is see if you can return it, if not, try these.

Wireless Controller:
1. Try taking out the micro chip and blowing over it,
2. Try to bring it closer to your console, so it can focus on to it better.

Wire Controller:
1. Try shifting around the cord until you get some kind of signal that it is working.
2. Take it to a software technician.
Please rate.

Good Luck, Noob815

Dec 30, 2009 | Intec Wireless Remote Control For Xbox 360

2 Answers

Super Nintendo picture flashes in & out on my flat screen


Check your cables and connection, they could be worn or cracked, try using on another tv or use a different device in the same plugins to verify if what is wrong

Dec 04, 2009 | Nintendo Super NES Console

1 Answer

Wii memory card for gamecube


You need a Game Cube memory card to save Game Cube Data, it goes in on the left side of the Wii near the back by where controller 1 plugs in.

Mar 17, 2009 | Nintendo Wii Console

1 Answer

Connect Gamecube controller to PC


Yes, it is possible by purchasing an Gamecube to USB adaptor.
Here's an example:
http://ecx.images-amazon.com/images/I/51HX6VCE4VL._SL500_AA280_.jpg

I have one just like this and it works fine with emulators and such.


Feb 21, 2009 | Nintendo GameCube Console

2 Answers

Nintendo 64


I have purchased the av cable you need on ebay. There are plenty of them available, most have pics of the cable. You need a rectanglular plug with three RCA jacks to connect to your tv. Unless you have an older tv, that will only accept the regular tv antenna connector. Then you will need an RF adapter. Have seen these on ebay also.

Hope this helps.

Apr 04, 2008 | Nintendo 64 Console

3 Answers

Wii Memory Cards


They are Nintendo Gamecube slots for saving Nintendo Gamecube games on only. If you want to have more storage space then buy another SD card.

Oct 28, 2007 | Nintendo Wii Console

Not finding what you are looking for?
Nintendo GameCube Console Logo

Related Topics:

2,327 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nintendo Video Game Consoles & Games Experts

Bee Santiago

Level 2 Expert

268 Answers

Raj Patel

Level 3 Expert

892 Answers

phil

Level 2 Expert

567 Answers

Are you a Nintendo Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...