Do you have installation & set-up instructions for telemergency 700e

Have you tried unplugging it from the powers supply, removing the battery and let is sit for a few hours to make sure all residual power is drained from any capacitors, then re-connect and re-program like it was a new unit.

the correct settings for LG 700E CRT Monitor. Sometimes, the settings ofthe monitor change automatically. Also, even after resetting the monitorsettings, sometimes, they remain same. So, I'll tell you the correct settingsfor LG 700E CRT monitor. Let's move to the main part.
So, Check the following settings.
ForBrightness and Contrast:
http://is.gd/dMBn9
For Position:
http://is.gd/dMBub
For Size:
http://is.gd/dMBBU
For Shape:
http://is.gd/dMBDC
http://is.gd/dMBGe

Here is the link for the Telemergency 2000 manual which should be similar.http://ebookbrowse.com/telemergency-2000-elite-instruction-manual-pdf-d378765928

BEST ANSWER

GO TO THIS LINK :- http://www.flickr.com/photos/chimanya/4834437197/in/photostream/

you can get standard shape setting for LG 700E monitor

problem with the monitor Display cable. it is damaged.

Normally monitor will receive 3 colors red, green, Blue signals from CPU. If one cable i.e Red wire connection is missing in display cable which is connected to monitor, Red color image on monitor wil be replaced with other fade color.
So, need the replace the display cable or display connector!

All the manuals are on their website http://telemergencysystems.com/

LG 700E monitor's power LED blinking continueously, no displaySolution.............

i have a red light on left of the phone. blinking how do i get it off

Hi - Telemergency's website does not have the manuals but has the contact details, scroll to the bottom of the page by clicking the link below:

Telemergency

Call or email to ask for a replacement manual.

Please take a moment to rate this solution & let us know if the information given was useful to you - Good Luck!

Informatica