Question about Samsung ML-1640 Monochrome Laser Printer

5 Answers

Refiiled catridge of samsung 1640 has not supporting,is it refill

I have refilled the samsung1640catridge but it is not supoorting give me the tips how to refill and is there any drivers or software for this help in this regard highly needed.

Posted by on

  • 3 more comments 
  • kc_katni Feb 06, 2009

    i have samsung laser printer 1640 after it refilling the catridge is not working some one tell ther were the cd in which it refresh the eprome and than it will work the catridge .

    so give me the cd solution

  • Hari Prasad mundhra Feb 13, 2009

    samsung ml 1640 laser printer not printing after toner ger refilled

  • abhishek001_ Feb 18, 2009

    hi, i am abhishek frm kanpur
    i have problem for samsung laser 1640. i filled tonner but
    red light blink
    pls send us patch for it


  • abdulubeid Mar 01, 2009

    i have sameproblem

  • Anonymous Mar 01, 2009

    hi,you said that close 3th and 4th leg in chip but i dont know
    that where is 3th and 4th leg
    please help me

×

5 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

RESET . Open the cover on the back of 1640 and see to small board . There is a m/s 93C66 near a big chip . Turn OFF the printer , connect pin 3 and 4 of 93C66 and turn printer ON . Hold on connected pin 3 and 4 of 93C66 until lamps on the front panel light , when lamps end light disconnect pin 3 and 4 of 93C66 . Now the page counter is 0 , and starting cartrige will work . May be different time between lamps on front panel OFF and disconnect pin 3 and 4 , it is about 0,5 sec , but may be larger or smaller , may be you will need to do this sequense once more . This method works if page counter before  RESET not more than 2000 pages . 

Posted on Feb 25, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Refiiled toner of samsung ML 1640 but toner was show empty & red light blink

Posted on Jan 23, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Hi, we just got a chip for this model, it will work on ML-1640, ML1641, ML-2240, ML-2241, ML-2242 Y ML-2245 this chip goes on the printer mainboard, it's a permanent one, never needs replacement , it will allow you to recharge the original demo cartridege , over ondo over again, if you need more info you can contact ma at nahmmacher@hotmail.com, thank you.

Posted on Feb 08, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Samsung tonner error

Posted on May 08, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Plz contact me on my mobile number 0091-9897041540 for this problem.

Posted on Feb 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Samsung ML-1640 Series printer, yesterday I got one error (Toner Exhausted). till then my printer is not printing any thing from computer but self test of printer is printing. Now what I have...


Hello,

For solving your problem, remove the tone catridge from the printer safely.

Refill the catridge from the "Service Persons" available near to you.

Place the catridge, and check.

Let me know that i Fixya the problem.

Yours
B.Krishnamacharyulu

Nov 16, 2010 | Samsung ML-1640 Monochrome Laser Printer

Tip

Solution to red light after refill Samsung ML 1540


Samsung printers such as ML 1640,ML 2245 and SCX 4300 have a toner page count embedded in their firmware. This is the reason that once you refill your toner after it has run out,the printer still doesnt print and says toner is exhausted. After you've refilled the cartridge,you'll have to reset the toner count also to zero...to do this,download the firmware here. ML 1640 Ml 2245 and SCX 4300 are not available on Samsung support site. You will need to google it and you may find it in torrents.

run it and it will reset your toner count to 0...you have to do this everytime you refill your toner.
Another solution is to open the backside of ML 1640 and ML 2245,locate the chip 93c66 and short pin numbers 1 and 4 and turn on the printer for a second.It only works in some cases though.

on Sep 01, 2009 | Samsung ML-1640 Monochrome Laser Printer

1 Answer

Hi i am using samsung ml1640 printer after refiling it gives toner exausted messafe what i do to solve the problem


When the number of pages reach the limit specified in the chip it starts to give the message that tonor is exhausted no matter if it has tonor in it or refilled. Replace the chip or tonor and it would work fine.

If its the starter cartridge try following: -
Download the firmware from here http://org.downloadcenter.samsung.com/downloadfile/ContentsFile.aspx?CDSite=in&CttFileID=2238869&CDCttType=FM&ModelType=N&ModelName=ML-1640&VPath=FM/200904/20090416100856890/ML-1640_V1.01.00.83.exe
run the software and this will reset the page count to 0. Samsung printers generally do not support a refilled cartridge and thus the red light.But resetting the page count to 0 makes the printer detect the cartridge as an introductory one.



Also check out
http://www.savetoners.com/toner-products-a-services/77-free-information-how-to-refill-samsung-ml-1640-1641-1645-2240-2241.html
http://www.arbikas.com/forum/Attachments/ML1640_reset.pdf

Nov 04, 2010 | Samsung ML-1640 Monochrome Laser Printer

2 Answers

In samsung ML 1640,when the toner i refilled not


You can replace toner for that printer only with genuine Samsung toner because refilled toners are not working.

Feb 23, 2010 | Samsung ML-1640 Monochrome Laser Printer

3 Answers

I want to refill Samsung ML-1640 toner Mono


GOTO YOUTUBE.COM AND SEARCH TONER REFILL

We have Zero cost solution for samsung -scx-4300, scx-4824/4828
ml-2240,ML 2245, ml 1640. clp 310/ 315, It is working permenently.
Refill cartridge is working for ever. which is running successfully.
also provide other new model reset solutions.

www.nakshatraworld.com

mob: 9713862555, 9893282285
vivekryp@yahoo.co.in

Jun 18, 2009 | Samsung ML-1640 Monochrome Laser Printer

5 Answers

Samsung ml-2245 toner refill problem


have a samsung ml2245 laser printer. using the printer tonner catridge refilling But Is Not Working can you have aney help me

Jun 08, 2009 | Printers & Copiers

4 Answers

It show red light.


If you wanto refill the cratridge,even after refill you'll need to reset your printer page count to 0.Download the firmware from here
run the software and this will reset the page count to 0. Samsung printers generally do not support a refilled cartridge and thus the red light.But resetting the page count to 0 makes the printer detect the cartridge as an intoductory one.

Apr 23, 2009 | Samsung ML-1640 Monochrome Laser Printer

5 Answers

ML1640 not working after toner refilling


Download the firmware from here http://org.downloadcenter.samsung.com/downloadfile/ContentsFile.aspx?CDSite=in&CttFileID=2238869&CDCttType=FM&ModelType=N&ModelName=ML-1640&VPath=FM/200904/20090416100856890/ML-1640_V1.01.00.83.exe
run the software and this will reset the page count to 0. Samsung printers generally do not support a refilled cartridge and thus the red light.But resetting the page count to 0 makes the printer detect the cartridge as an intoductory one.

Mar 23, 2009 | Samsung ML-1640 Monochrome Laser Printer

Not finding what you are looking for?
Samsung ML-1640 Monochrome Laser Printer Logo

1,407 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Printers & Copiers Experts

Whit
Whit

Level 1 Expert

185 Answers

HEMANT GROVER

Level 2 Expert

166 Answers

CheckitRight
CheckitRight

Level 3 Expert

1352 Answers

Are you a Samsung Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...