Question about Panasonic KX-TG5439 5.8 GHz Dual Handset Cordless Phone (P02120)

Open Question

I have lost my manuel for the KX-TG5632 Panasonic 5.8GHZ Gigarang

How do I get own because my hand sets says there is no link to the base and moving closer does not work

Posted by on

6 Suggested Answers

jessee007
  • 306 Answers

SOURCE: no link to base Panasonic KX-TG2357

are you running a wireless router? try unpluging router to test phone.

Posted on Jan 07, 2008

  • 4 Answers

SOURCE: Panasonic Phone KX-TG2432

I have the same probloem with a KX-TG 5672. I am going to call 1 800 2111 7262 on Monday and ask for technical support. If you get a solution, pls notify me.

Posted on Jan 26, 2008

  • 4 Answers

SOURCE: Panasonic KX-TG2367 says "No link to base".

This worked for my mother's KX-TG2357:

We tried doing what it said in the manual on page 54. That didn't work! She then decided to just unplug everything. About 3-5 minutes later, plugged everything back in, and lo and behold, everything was working fine!!

Posted on Feb 08, 2009

  • 226 Answers

SOURCE: no link to base

It sounds like you may be getting interferance from somewhere. Try moving the base unit to another location. Avoid putting by other electronics. T.V.s, microwaves, and such can mess with the signals. Hope this helps Good Luck!

Posted on Jul 24, 2009

  • 3 Answers

SOURCE: I have the below-mentioned problem with my

it will just ring once and then it will stop.

Posted on Nov 20, 2009

  • 1 Answer

SOURCE: kx-tg5632 how do i forward call to my cell

Help me guys!!When using call fwd to outside from a custom service on a TVM50 the call will not transfer. I am using many manual in TVM50 but settings are not working. I have tried many changes to timers, Cos ets and reset help me !! TDA100 for PBX model TVM50 for voice processing system
regards Tsegi

Posted on Nov 07, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I press the talk button it says: No link to base. Move closer to base. Try again


Hand each phone up on the base and it will marry it. If you continue to have no link to base make sure everything is plugged in correctly. If it persists you probably have a defective phone.

Jan 25, 2011 | Panasonic KX-TG5632 Phone

1 Answer

Returned home from vacation. Had been lightening


panasonic KX-TG5632
No dial tone ,no link to the base,move closerto base,try again

Dec 02, 2009 | Panasonic KX-TG5431 Cordless Phone

2 Answers

I have the below-mentioned problem with my Panasonic Cordless model KX-TG3531BX No link to base. Move closer to base, try again. Please contact me on 9879590311 or email me at ritu_vpatel@yahoo.com


place all handsets in the base unit for about 1 minute each. This links the handsets to the base. Sometimes the handsets lose their link to the base unit. If this doesn't work try to call Panasonic tech support for further information, the phones could be defective as well.

Aug 30, 2009 | Panasonic KX-TG5632 Phone

1 Answer

Panasonic handset, KX-TG5632 buttons won't work


After trying all possible solutions (unplugging, replugging unit; switching batteries and, my idea of smacking the handset with my hand), I bought a new phone. :-)

Feb 07, 2009 | Panasonic KX-TG5632 Phone

2 Answers

Adding handset to Panasonic KX-TGA542M phone. ? how to ?


I ordered a new kx-tg560m handset for my kx-tg5632 base unit, but the enclosed instructions for registering it with the base unit were wrong. Fortunately, I found the old quick setup guide in my files.

If you do not have the same base unit and handset, go to the URL:
http://www.panaxonic.com/RegisterYourHandset.

1. On the handset, press [MENU], then press [0][0]. The handset displays "Refer to manual to prepare base. Then press OK->"
2. On the base unit, press [SELECT] until the desired extension number [H1, H2, H3, or H4] is displayed on the base unit, then press and hold [CALL] until the CHARGE indicator flashes.
3. On the handset, press the [OK] softkey.

When the handset is off and sitting in the charger, the handset's extension is displayed in the upper right corner.

Oct 27, 2008 | Panasonic KX-TG5422M Cordless Phone

2 Answers

Kx-tg5634m


i cant get my phone to work. it says no link to base move closer to base,try again.

Sep 18, 2008 | Panasonic KX-TG5632 Phone

2 Answers

No link to base kx-tg8231b


Panasonic KX-TG2313 - No link to Base problem... simple to fix!
Just unplug the power to the base and plug back in... should get a dial tone now!

May 18, 2008 | Panasonic KX-TG5632 Phone

1 Answer

Program phone


Hand set reads "Ringer off [2]" How do I get hand set to ring??

Mar 18, 2008 | Panasonic KX-TG5632 Phone

2 Answers

Ringer


Hold the Low volume key on the base unit for sometime. A beep will sound that means the ringer of the base unit is off.

Feb 18, 2008 | Panasonic KX-TG5632 Phone

1 Answer

DECT registration


Sorry but could you re-confirm the model number, as the post heading shows KX-TG5632 and the text of your query shows it as KX-TG7223E ? ( Panasonic site does not recognise the latter ) Thanks.

Jan 26, 2008 | Panasonic KX-TG5632 Phone

Not finding what you are looking for?
Panasonic KX-TG5439 5.8 GHz Dual Handset Cordless Phone (P02120) Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Phones Experts

kakima

Level 3 Expert

96627 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

guyvstewart

Level 2 Expert

82 Answers

Are you a Panasonic Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...