Question about Boynq ALIBIAIR Webcam

1 Answer

I am trying to install the Alibi webcam and speaker on my computer so I can skype, but it is not detecting my webcam. I can use the speaker though. I am running windows 2000. ANy ideas?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Normal 0 Did you install the software with the camera connected to the computer? Disconnect the camera from the USB port and reinstall the software. When the program asks you to connect the camera, do so, and it should work. Hope this is of some help. Bud

Below is info for setting up Audio & Video to chat on line after you install , either Skype or a messenger program.


Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:

After downloading and installing Skype set it up as follows:

  1. Go to TOOLS, then OPTIONS, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if installed properly will come up and show a picture.
  4. Then on the bottom of the page click on Save.

The camera and audio should function properly. Your friends and Family will now see and talk to you.

B. Yahoo Setup:

After downloading and installing Yahoo Messenger set it up as follows:

  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.

C. Windows Live Messenger:

  1. After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
  2. Then on the Windows Live messenger window on the right side, click on “ “Show Menus.” And then click on “Show the Menu Bar”.
  3. Next go to the Menu Bar on right side, click on “ “Action.”
  4. Go to “TOOLS” and click “Audio and Video Setting” and follow the instructions.
NOTE: You audio and video shoud work. Enjoy.

When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this helps. Bud

Posted on Jan 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Unable to detect webcam on aa Toshiba laaptop while using skype


Make sure the WEBcam driver is installed.
When the WEBcam works then the fault is with the Skype configuration. Sometimes the WEBcam settings drop off and the WEBcam need to be selected again. Open Skype - Tools - Options - Video Settings and select the installed WEBcam - Save the settings.

Mar 30, 2013 | Toshiba Computers & Internet

1 Answer

Cant find web cam


Before plugging the webcam you have to install the software driver first. After installing restart your computer and plug the webcam, it will detect the system as found new hardware just click ok or next then the system will update or installed the webcam. Mostly the software application are automatically appeared on your desktop. You can test your webcam by clicking the shortcut on your desktop or by using video call on yahoo messenger or using skype software. These two messenger will test if your webcam are properly installed and working. Have a nice day!

Feb 18, 2011 | Toshiba Audio Players & Recorders

1 Answer

We have connected the webcam to the c.p.u. but the system is not detecting the device... inturn webcam is not working on the system.. plz help us providing the correponding drivers


Visit the Logitech website and browse the photo gallery for your model and click on the photo to navigate to the support page.
Note - Older models on page 2 - look for the link at the bottom right of page 1 and click on it "Still can't find your product?"

http://www.logitech.com/index.cfm/405/&cl=us,en?prodcrid=405

In addition to the Logitech installer you will need to check the support software - Microsoft DirectX . This comes pre-loaded on most Windows computers but has to be updated - I am currently on version 11
To start the DirectX Diagnostic Tool, click 'Start', click 'Run', type dxdiag in the Open box, and then click OK
Run through the tabs checking the 'notes' windows for information
The version will be shown on the 'Systems' tab

Procedure to re-install Logitech software
Close all programs while uninstalling - downloading and uploading software
Disconnect your webcam
Uninstall the current webcam software on your computer
Restart computer
Download the Installation package from Logitech
Run the installer and choose your options during the installation - You may not want Logitech Chat but the Desktop icon for the webcam toolbar is a must.
Connect your webcam when prompted.
SKYPE SET UP

Connect your webcam

Test your webcam here to make sure it broadcasts ok - Hit 'Allow' in the top window and check your cam in the left hand panel.

http://www.testmycam.com/
Not working ? - troubleshoot your drivers and software - get your cam working before moving on

Working OK ?

Set your webcam mic as default ( if it has a built in mic)

Plug in the webcam

TEST SPEAKERS
Right click on speaker icon in System Tray or from Control Panel
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
Right click on the volume graph and select 'Show disabled devices' and 'Show disconnected devices'
To set required (webcam) mic as default - click on mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click 'OK'
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays

Restart computer

CONFIGURE TO SKYPE
Connect webcam
Its good practice to disconnect and re-connect your webcam before you start (To reboot the webcam software) - if you have been using it elsewhere the SKYPE software may have difficulty in locating it, even if you exited the previous program correctly.
The reason being, the webcam software can remain hooked-up to a program and needs to be rebooted.
Mine, I just unplug it from the USB and plug it back in to reboot the software.
If yours is integral with the computer you will have to re-start the computer, use a keyboard shortcut or disable / enable the webcam from the Device Manager.

Start Skype.
On the 'Tools' menu, click 'Options'.
In the navigation pane of the Skype 'Options' window, click 'Audio Settings'
Run down the list setting your defaults
Select your webcam as the default microphone.
Make a free test call
Click 'Save'
In the navigation pane of the Skype Options window, click Video Settings.
This will launch your webcam
Adjust quality of picture in 'Settings'
Check the correct webcam is shown as default
Click Save
Test your webcam by making a Skype test call.
For more information about how to configure Skype Messenger, please visit the following Skype Web site:
http://support.skype.com (http://support.skype.com)

Before opening Skype disconnect your webcam for a couple of seconds and do not open your cam for a preview but wait and let the Skype software take full control when you start a video chat.

Nov 11, 2010 | Logitech Quickcam Chat Webcam

1 Answer

I need the installation software for an alibi webcam


I will suggest you to use www.update.microsoft.com site to update all the hardware including alibi webcam drivers..

Aug 08, 2009 | Boynq ALIBIAIR Webcam

1 Answer

Cant get webcam to work!!!!!!


try and get a free driver from the internet.

Jul 27, 2009 | Boynq ALIBIAIR Webcam

1 Answer

Boynq Alibi A Bust


1st You download Webcam Driver.
Boynq Alibi A Bust
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

Jun 06, 2009 | Boynq ALIBIAIR Webcam

4 Answers

Webcam won't work with Skype


Normal 0 Also send this to your family and friends so they have their computer setup properly.
Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.

Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/) set it up as follows:
  1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if Installed Properly will come up and show a video picture.
  4. Then, on the bottom of the page click on Save.
The camera and audio should function properly. Your friends and Family will now be able to see and her to you.
Hope this helps. Bud

Apr 06, 2009 | Veo Mobile Connect Webcam

1 Answer

Yahoo not recognising Labtec Webcam Microphone


Normal 0 See section B. Yahoo Messenger in the info below to setup the Audio & Video.
Also send this to your family and friends so they have there computer setup properly.
Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:

After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/) set it up as follows:

  1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if Installed Properly will come up and show a video picture.
  4. Then, on the bottom of the page click on Save.

The camera and audio should function properly. Your friends and Family will now be able to see and her to you.

B. Yahoo Setup:

After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.html ) set it up as follows:

  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.
Hope this helps. Bud



Feb 09, 2009 | Labtec Webcam Pro

1 Answer

Unable to install drivers for my Boynq Alibi Webcam


I had the same problem, I bought it from a store with no CD! After plug the USB i have only sound with no Video.

After googling around i finally found the solution: You can try below.

1, Unplug your USB connector
2, Download the right driver from the real manufacture : http://home.eeti.com.tw/web20/drivers/IC_drivers/PCCAM_WHQL_Standard_Installshield_120308.zip
3, Unzip and install the driver.
4, After finished installation, replug the USB connector (You should plug to the different port that you used to plug before)
5, Now window XP finds the right driver and installs for you.
6, Restart your PC, then use Skype to test. It works :)

Hope this help you guys
Good luck

Dec 10, 2008 | Boynq ALIBIAIR Webcam

1 Answer

Installing the alibi boyeng web cameara in vista os


http://findstuff.com/search.php?uvx=-z_Iatn6DzWbO8SKFZQzQv4aoUMb0V0o88IG8TRF2cZGVmO3itP6IOnsUDoUlQ5Z

Nov 19, 2008 | Boynq ALIBIAIR Webcam

Not finding what you are looking for?
Boynq ALIBIAIR Webcam Logo

Related Topics:

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Boynq Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Boynq Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...