Question about GE Profile Harmony DPGT750EC Electric Dryer

2 Answers

Touch screen quit working.

I have been having trouble with the blower motor, somtimes it works somtimes it doesn't. Now sudenly the touch screen stopped working. It has power and lights up when the power is on but when you touch it to change settings it isn't responding. Any clues?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers
Re: Touch screen quit working.

We had the same problem with the touch screen erratically not working. Then the blower stopped working. Initially, we thought it was the blower motor. Our technician said it was the main circuit board that needed to be replaced. This is covered in the 5 year manufacturers warranty. Here is the part:

Posted on Sep 28, 2007

  • Level 1:

    An expert who has achieved level 1.


    An expert that got 5 achievements.


    An expert who has answered 20 questions.


    An expert that has over 10 points.

  • Contributor
  • 20 Answers
Re: Touch screen quit working.

Either the connector is partly disconnected or you need a new touchpad. If there is no display then you need a new display board or clock assembly. some models have display board and touch pad as one assembly.

Posted on Jul 21, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Touch screen doesn t work

The touch screen connects to a control board. Regardless of what the diagnostics indicate, the control board may be defective.

Jan 16, 2014 | GE Dryers

1 Answer


wave touch or iq touch service manual.

Might be a roller or idler or maybe something in the blower housing. I have included the service manual for a late model affinity dryer. good luck on your repairs. If the link don't work do not blame me, blame FixYa. LOL

May 14, 2013 | Frigidaire Affinity 5.8 Cu. Ft. Gas Dryer

1 Answer

Touch screen not working

i have same problem the cable to cn8 is broken on mine. maybe yours is unplugged but so you know it's $600 for servvrvice man and $ about $300 for the part so far I have NOT found a way around it BUT I am NOT done yet. Joe Comer. You can contact me directly ayt

Mar 20, 2013 | GE Profile Harmony DPGT750EC Electric...

1 Answer

Dryer hit start button and it hums

sounds like a motor is going bad or you have a sock in the blower fan but if it was a sock, it wouldn't work at all

Feb 12, 2013 | LG Dryers

1 Answer

The motor doesn't start; just hums.

I would have to agree that the motor is the problem, but before you replace it, check the bearing and blower fan to make sure they are in good shape. If the bearing is bad or the fan is blocked it could give you the same indication.

Jan 02, 2012 | Speed Queen AES28AWF Electric Dryer

2 Answers

The dryer isn't drying. The top an the control panel are very hot to the touch.

Hello Rodney.
What the most probable trouble with the dryer making it very hot to the touch while at the same time not drying is a poor air flow problem. That could a be a broken blower wheel,a blocked or restricted vent.


Nov 12, 2011 | Dryers

1 Answer

Whirlpool Calypso dryer GEW9868KL2

It is one or two things. Motor start switch or the motor itself.

Aug 11, 2009 | Whirlpool GEW9868K Electric Dryer

1 Answer

Kitchenaid Superba Dryer also stopped working (3 years old)

Yes it is, you can bypass it for testing purposes only, also clean out your vent too the outside it is probably clogged that is what usually blows them out.

Jul 24, 2008 | Dryers

1 Answer

GE Profile Electric Dryer, Blower nt getting up to speed

You need to replace the blower motor. It says you are having temp problems because the blower is quitting and the heater is overheating.

Jun 01, 2008 | GE Profile Harmony DPGT750EC Electric...

2 Answers

Blown thermal fuses

I would think not. The MAIN cause of that fuse blowing is lint build up. Turn the dryer on and put your hand on the outside of the vent duct. Is the air blowing hard? If so, you will probaly be ok, if not maybe your blower wheel needs to be replaced...

Dec 15, 2007 | Whirlpool LER5636P Electric Dryer

Not finding what you are looking for?
GE Profile Harmony DPGT750EC Electric Dryer Logo

511 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Dryers Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

John Tripp
John Tripp

Level 3 Expert

4625 Answers


Level 3 Expert

2963 Answers

Are you a GE Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides