Question about Brother HL 2700CN Laser Printer

1 Answer

Prints My prints are coming out with small appearances of coloured broken lines here and there but only on left and right margins! ! Have printed 1-3 of print settings and a test page all same. Have cleaned off all excess coloured toner but same again.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 186 Answers
Re: prints

The fuser may need to be replaced. Not cheap or easy!

Posted on Jun 21, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

My printer -X1185 prints the page with a 3 inch blank area on the left side and some of the right side printing is off the page. This is typical in my e mail page, and even if I center the letter on...

Web site designers create Web pages for display on a monitor, not for users to print on 8.5- x 11-inch pieces of paper. This becomes obvious the first time you try to print a Web page. Content you need may get chopped off by the right printer margin, whereas content you don’t need, such as the site’s copyright information, will print on its own sheet of paper. Fortunately, you can avoid such problems with a little foresight.

Before printing any Web page, open Internet Explorer’s File menu and select Print Preview. The current Web page will appear on-screen exactly as it will print on paper. Scan the preview carefully. If it appears that some content is chopped off by the right margin, click the Page Setup button located directly to the right of the Print button in the upper-left corner of the Print Preview window. In the resulting Page Setup dialog box, adjust the left and right margins so that each is set to 0.25 inches. The extra inch of space you gain by resetting the margins should provide just enough room to accommodate all of the content on most sites. Click OK to save the changes and return to the Print Preview window.

Next, scan the preview to determine which pages contain the content you want to print. Take note of those pages and click the Print button in the upper-left corner of the Print Preview window. Locate the Print Range heading and select the Pages option. Type the number of the first page you want to print in the From field and type the number of the last page you want to print in the To field. For instance, if you want to print just the first three pages of a Web page’s content, type 1 in the From field and type 3 in the To field. If your browser doesn’t have To and From fields, type the range of pages (such as 1-3) in the corresponding field. Make sure your printer has paper and click Print.

May 04, 2008 | Printers & Copiers

1 Answer

Printer prints off the side of the page

Hp2600n Colour Printer Colou Problms

Feb 14, 2014 | Lexmark E332n Laser Printer

1 Answer

How do I change margin setrtings foe Lexmark P4350

If you are preparing to print a document that you have created in Microsoft Word, you may be concerned that all the text on the page will print exactly as you see it on your screen. This is not always the case. You can adjust your print margins to ensure that your text prints on each page exactly the way you would like it to appear.

Opening Your Document
Open your Microsoft Word document by double-clicking the Word icon on your desktop. If you do not see the icon on your desktop, then you can locate it where it is buried on your "Start" menu. Click "Start," followed by "All Programs." Then click "Microsoft Office," followed by "Microsoft Office Word." A new document will open on your screen. Click the "Office Button," followed by "Open." Scroll through the files listed, and double-click the one you would like to print. It will open on your screen.

Check Your Margins
By default, your page margins are set to 1-inch margins on the top, bottom, right and left of your page. You can check your margins or change them by clicking "Page Layout," followed by the "Margins" button.

Select New Margins
Select a different margin size, such as "Narrow," which indicate 1/2-inch margins, or "Wide," which indicate one-inch margins on the top and bottom and two-inch margins on the left and right. You also can select "Moderate," which indicate one-inch margins on the top and bottom and 3/4-inch margins on the left and right. Finally, you can select "Mirrored," which indicates one-inch margins for the top, bottom and outside. The inside margins are set at 1 1/4 inches.

Print Your Page
Print your page. Press "Control" plus the "P" button. The printer dialog menu will come up. Make sure that "All Pages in Range" is selected. Press "OK." If your printer cannot print your new margins, then a new menu will pop up telling you to adjust your margins.

I hope you find it very helpful. Best regards.

Aug 22, 2011 | Lexmark P4350 All-In-One InkJet Printer

2 Answers

On my Laserjet 3015, in Microsoft Word, if I set top, bottom, left, and right margins to 1", on the printed page, the margins print as Top 1", Left 15/16", Right 1-1/8", and Bottom...

The default paper selection/ size in MS Word is 'letter'. you may have designed the document on letter size and while printing you have A4 size paper in the printer.
So, Make sure that you design the document on the same paper size (such as A4, which is commonly used). Secondly, while printing don't print the document directly. From the Print dialogue option choose the exact paper size and un-check (de-select) any option of paper resizing (if available). You will have the documents printed exactly as designed.

Let me know if any further clarification/ assistance is required.

Hope it helps! Good Luck! Thanks for using Fixya!

Jul 12, 2011 | HP LaserJet 3015 All-In-One Printer

1 Answer

I am a teacher. We have Dell computers with windows 7 on them. Recently our school district downloaded Microsoft Office 10. Since the new microsoft office, my xerox phaser 8500 is printing strange. ...

Hi fsaltzman,

You need to check the margin settings in the print preview option, make sure you decrease the margins that are set by default and try printing a test page , this should work fine.

On the File menu, you need to click Page Setup, and then click the Margins tab.
Here you can adjust the margins as per your convenience.

To View page margins :-
  1. You need to go on the Tools menu, select Options, and then select the View tab.
  2. Under Print and Web Layout options, select the Text boundaries check box.

The page margins appear in your document as dotted lines.

You can use these dotted lines to correct your margins so that your student's assignments are not cut off and there is no large margin as you have mentioned in your question.

You can view page margins in either Print Layout or Web Layout view only, and they do not appear on the printed page.

Hope this helps

May 11, 2011 | Printers & Copiers

1 Answer

Small black lines print at the right side margin

Good day!You can clean the drum of the cartridge by wiping a clean cotton in it..mybe its dirty on that part..


Mar 21, 2010 | Printers & Copiers

1 Answer

HP LaserJet 2430 prints vertical grey bands

It is a bad Toner Cartridge or Fuser. Most likey a bad toner cart.

Mar 07, 2009 | HP LaserJet 2430n Printer

1 Answer

Dots on the left side margin

This problem comes from drum cartridge, you may try:
1) take out drum cartidge open drum cover clean the surface at leftside(using soft brush) and check drum surface at leftside, there is damage if you see the color surface appear a broken-ring at leftside(the color changed), you have to change new drum cartridge,
2) sometimes cause cartidge clean brush dirty can not do well cleaning job, just clean this parts at leftside well then turning drum a little there is no toner appear at surfac leftside if ok.

Dec 21, 2008 | Brother HL 2140 Laser Printer

1 Answer

Printer update

Print Head Cleaning / Head Refreshing If the printed nozzle check pattern is broken, missing, or a specific color is not printed, clean the print head. NOTE:
a. Cleaning the print head consumes a small amount of ink. Cleaning too often reduces the amount of ink in the ink tanks.

b. Print head cleaning is performed when you connect the power cord. Your machine may perform print head cleaning periodically to avoid clogging.
  1. Press <COPY> or <PHOTO>.

  2. Press <Menu> repeatedly until <USER DATA> appears.

  3. Press < (left arrow) or > (right arrow) to select [MAINTENANCE].


  4. Press <OK>.

  5. Use < or > to select [CLEANING] or [HEAD REFRESHIN] as necessary.


    [CLEANING]: Performs normal print head cleaning.
    [HEAD REFRESHIN]: Performs deep print head cleaning.

  6. Press <OK>.


  7. Print a Nozzle Check Pattern to see if print quality improved.
    1. Press <COPY> or <PHOTO>.
    2. Press <Menu> repeatedly until <USER DATA> appears.
    3. Press < (left arrow) or > (right arrow) to select [MAINTENANCE].

    4. Press <OK>.

    5. Press <OK> again.
      The machine prints a nozzle check pattern (A).


  8. If broken or white lines appear in the pattern, perform two Head Refreshings (from steps 1 through 6) then print another Nozzle Check Pattern.

  9. If print quality does not improve after two Head Refreshings, replace the appropriate ink tank.
Confirming The Nozzle Check Pattern
Broken lines
sj402061.jpg White lines
sj402062.jpg Click here to return to step x to perform Head Refreshings

Oct 18, 2007 | Canon PIXMA MP130 All-In-One InkJet...

Not finding what you are looking for?
Brother HL 2700CN Laser Printer Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Printers & Copiers Experts

Jim Yeh

Level 1 Expert

15 Answers

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Rick Johnson
Rick Johnson

Level 2 Expert

84 Answers

Are you a Brother Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides