Question about Cooktops

1 Answer

Creda gas cook top sparks but does not light

All other burners work welland good

Posted by on

  • 2 more comments 
  • melamed1 Jan 13, 2009

    left front burner sparks but doesn't light

  • melamed1 Jan 13, 2009

    creda gas 5 burner cook top front left burner sparks but does not light

  • melamed1 Jan 13, 2009

    Creda model # ggh 182 no. 42407

    serial # 11 100137

    left front burner sparks but does not light.

    all other burners work well.

  • Hugh Person Apr 25, 2009

    I have a Creda GGH102 gas stovetop with electric gizmos that spark - and click - but rarely do what they are supposed to do an light the stove!

    I have cleaned the holes in the circular covers and the little sparking metal doodads to no avail. (Cleaning the holes makes the stove burn better when I finally break down and start i - with a match!)


×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have a Creda GGH102 gas cooktop that once power is supplied to it, it will not stop clicking.

Posted on Nov 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gas burner won't light unless gas is turned down to the low position.


I've had this happen before,first make sure that the black burner cap is clean underneath and it's making good contact with the aluminium burner,also make sure the igniter is sparking across to the burner, check the ceramic coating around the igniter isn't cracked or the wires shorting out . Good luck.

Feb 20, 2014 | Jenn-Air Cooktops

1 Answer

The igniters on our Creda cook top keep sparking. Unplugging it isn't a solution. Where can we buy repair kits, or - better yet, what solutions do you have?


Hi,
Here is a tip that I wrote that will help figure out why the burner spark keepson clicking...

Gas Range Repair Burners Keep on Clicking
heatman101

Sep 02, 2011 | Cooktops

1 Answer

Creda stovetop tries to light without gas on.


Hi,
Here is a tip that I wrote that will help figure out why the burner spark keeps on clicking...


Gas Range Repair Burners Keep on Clicking
http://www.fixya.com/support/r4033033-gas_range_repair_burners_keep_clicking

heatman101

May 28, 2010 | Creda Colonial 42352 23 in. Electric...

1 Answer

Burners do not light consistently


Hi,
Here is a tip that I wrote to help people troubleshoot problems with their cooktops not igniting.

Cooktop Range Stove spark ignition does not work
http://www.fixya.com/support/r5649407-cooktop_range_stove_spark_ignition_not

heatman101

Apr 18, 2010 | Whirlpool GLT3034 Gas Cooktop

1 Answer

All cook top burners spark when any is turned on


OK, the best action is to call for service, if the unit was just installed, and purchased. This unit should be covered at this time, by the manufactures warranty, or store 30 day warranty. This repair should be free. The culprit will be a faulty spark ignition switch, and module. Testing is required. Once this switch, or(module), is replaced, the unit will operate correctly.

Nov 04, 2009 | Jenn-Air JGC8430 Gas Cooktop

2 Answers

G.E Profile gas cook top #JGP640 ignitor.


It is sparking because the module does not sense the heat which would normally cause the sparking to stop.

It can be caused by a poor ground, make sure the ignitor at that burner is clean and free from any obstructions. If it is then it could either be a defective ignitor or spark module.

Mar 12, 2009 | GE Cooktops

1 Answer

Spark module will not stop after lighting burner


The module might not sense the flame: check electrical connections: wire (and its contacts0 and conections by fryer chasis; to be sure please bond with 18AWG wire pilot burner with spark module green wire.
MarKor

Mar 09, 2009 | Jenn-Air 30 in.JGD8430ADS Gas Cooktop

2 Answers

Burner won't light


Clean the gas nozzle w/small wire are located at the back of the gas cook top /shut off the gas clean small gas nozzle clog / w moisture /rust dust and any foreing material.

Dec 19, 2007 | Thermador SGS36GS Gas Cooktop

Not finding what you are looking for?
Cooktops Logo

Related Topics:

530 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cooktops Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

meztang
meztang

Level 2 Expert

112 Answers

Gere knutson

Level 3 Expert

842 Answers

Are you a Cooktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...